flott 16 used for sale

Key data: 2080 KW, 2711 kVA, 11000 V

Containerized Gas Generator Set MTU 16V4000 2MW at 11kV 50Hz UK Power Generators Ltd is offering a Brand New Containerised Generating Set for your next project. We have multiple units ready to move stored in suitable environment manufactured by MTU Germany Model 16V4000L64FNER with proven reliability for its users. These 2MW turnkey solutions package with 11,000 V, 50 Hz & 1500 RPM is a great opportunity for those waiting to acquire a reliable source of energy for their industrial or commercial purposes. These units are available immediately without any lead time from the factory. Why you should buy these units from UK Power Generators Ltd: No Lead time Turnkey package - quicker installation ISO Standard container 40ft - CSC Approved for shipping worldwide Brand New Units - Same excellent condition as from the factory MN 80 Gas known for its higher efficiency Ze ...

This ACRA CHALLENGER ASG-1632HS was manufactured in 2006. It features a robust hydraulic surface grinder with a table surface of 800 x 400 mm and a maximum table weight of 400 kg. Equipped with a variable electro-magnetic demagnetizing table and a 2-axis SONY DRO for enhanced precision. Very good condition. Contact us for more information about this machine.

Weight: 290 kg : 160 mm : 2.800 pa output: 3 kw : 1.500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This BLEMAS EURO 160 press brake was manufactured in 1993. It features a press force of 160t and a bending length of 3m. The stand passage is approximately 2.5m, and it is equipped with a Cybelec control system. The machine is ready for immediate use, with cylinders that have been re-honed and sealed. Contact us for more information about this machine.

faceplate diameter: 1.600 mm swing diameter: 2.000 mm turning height: 1.400 mm Control: Fanuc max. Torque: 23.863 Nm cutting capacity: max. 3.000 kgf max. workpiece weight: 10.000 kg table:: table diameter: 1.600 mm table speeds: 0,7 - 280 1/min power capacity - table: 37/45 kW C - Axis:: resolution: 0,001 ° Working speed: 0 - 1.200 °/min max. table speed: 3,333 1/min turret slide:: Shank diameter: 32 mm spindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1 power capacity - Tool Spindle: 15 / 18,5 kW max. Torque: 235 Nm ram cross section: 220 mm axis stroke:: x-axis: 1.900 mm z-axis: 900 mm cross rail adjustment: 700 mm Tool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos. max. tool weight: 50,0 kg draw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/min feed speeds: max. 7.500 mm/min rapid traverse of the crossrail: 300 mm/min total powe ...

This WOLF KGW 160 was manufactured in 2001. It is an extraction system designed to handle large air volumes, with a supply air capacity of 10,000 m3/h and exhaust air at 9,500 m3/h. Powered by an 11 kW motor, it efficiently manages air flow and pressure. Consider the opportunity to buy this WOLF KGW 160 extraction system. Contact us for more information about this machine.

Induction motor SIEMENS 1SN 1634-4 HP 90-Z 1992, H-modul, all documents. Power: 2,500 kW (3,399.05 hp). Input current: 192 A Total weight: 9,900 kg Cooling Type: Water

This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.

General SKU413X1257 MakeGKM Siebtechnik LocationBarneveld CEcheck TypeKTS-1600/4 Main Features MaterialStainless steel Surface1.83 m2 Sizes diameter1580 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.83 m² Number of sieve decks:4 Sieve sizesø 1580 mm With covercheck Inletø 200/400 mm Outletø 200 mm Drive vibro motorcheck Motor4 kW, 400 V 1455 rpm Sieve perforation4,0/ 4,0/ 3,0/1,6 With ball cleaningcheck With extra sieve deckscheck Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.2877 Year of construction2017 Mounted on mild steel framecheck Floor space1,95x1,95 m Total height1,70 m Weight1400 kgTumbler screening machinesGkm SiebtechnikSieves > Tumbler screening machinesBrand > Gkm Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new  ...

This 6-axis FANUC R-2000iC 165F robot arm was manufactured in 2019. It features a maximum reach of 2655 mm and can handle wrist weights up to 165 kg. The robots footprint is 771 x 610 mm, and it operates on a 380-575V, 3-phase electrical system. Consider the opportunity to buy this FANUC R-2000iC 165F robot arm. Contact us for more information about this machine.

General SKU397X1177 LocationBarneveld MakeGruber Pressure Working pressure1 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume1602 Ltr. Specified Features - Pressure vessel Reactorcheck Capacity1602 l. Dished bottomcheck Top connectionscheck Outletcheck With jacketcheck volume Max. temperature90°C Pressure vessels MaterialStainless steel 1.4571 (316Ti) Information No.2547 Year of construction1992 Mounted on legscheckPressure vesselsGruberTanks > Pressure vesselsBrand > Gruber What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 6-axis ABB IRB 1600 robot arm was manufactured in 2010. It features versatile mounting options including floor, wall, and inverted setups, and is compatible with IRC5 and OmniCore controllers. With a maximum arm load of 30.5 kg and a reach of up to 1.45 m, its ideal for a variety of applications. Consider the opportunity to buy this ABB IRB 1600 robot arm. Contact us for more information about this machine.

General SKU390X1009 MakeBühler LocationBarneveld CEcheck TypeOTWG-160-C (static) Main Features MaterialStainless steel Motor0.55 KW Surface1.59 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,59 m² Product inlet190 × 110 mm Product outletDN 150 Air inletDN 400 Air outletDN 400 Motor0,55 kW 290/500 V With variable speed drivecheck pulsator 26–128 rpm With fancheck (PILLER: Type: 40351KE 80315) Motor30 kW Capacity3.1 m³/s Max. temperature250 °C Fluidbed dryers continuous Cooling beltcheck MaterialStainless steel 1.4306 (304L), Stainless steel (Sandvik 1200SA) Information No.10 263 218 Year of construction1996 Mounted on framecheck Weight1050 kg Extra SpecificationsVolume 2,7 m3 max pressure till 250°C, +0,2 bar, max pressure till 150°C, 0,1 bar, max temperature 250°C Fluid bed dryers continuousBühlerDryer ...

• All-round labeling • Output 1200-3000 objects/h • For cylindrical objects diam. 10-26 mm according to change part • Object heights 22-100 mm • Labelling unit Herma 300 • Label height max. 80 mm • With label control Scanware Lynx-Signum HR year 2009 • With 10 sets of change parts • Drive 230/400V/50Hz

centre distance: 2000 mm : 600 weight of the machine ca.: 3,2 t Passage 49 mm Digital Lynette The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bucket chain excavator KS 160, manufacturer ROHR Type: floating bucket chain dredger Bucket ladder length: 28 m Excavator depth: 15 m Bucket capacity: has been increased to 175 L Bucket Bulk: 8-32/min Theoretical flow rate: 76-307 m³/h Drive: converted to electric

Manufacturer: FINSAM Model: BOCK HG22E/160-4 Serial Number: 873833 Year of manufacture: 2012

sheet width - max.: 0850 mm coil weight: 5,00 t coil internal dia.: mm Belt thickness: 1,00 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Including coil lifter, feed unit, control panel, hydraulic unit, control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CHEVALIER FSG-1640ADIV surface grinding machine was built in 2022 in Taiwan by Falcon Group Co., Ltd. The machine is used for precision grinding of workpieces with a maximum weight of 440 kg. A number of state-of-the-art technical solutions, combined with extensive equipment, make it the best choice for professional production applications. Grinding is performed fully automatically on a large electromagnetic plate or directly on the work table. The work table is hydraulically driven and moves on ground and induction hardened guideways. To achieve the highest machining accuracy and precision, the CHEVALIER FSG 1640 ADIV magnetic surface grinding machine is equipped with dynamic balancing and automatic dressing of the grinding wheel. During grinding wheel dressing, the work table automatically positions itself where the diamond tools are and compensates according to the operator’s  ...

General SKU397X1150 LocationBarneveld CEcheck MakeRichter Pressure Working pressure16 Bar Main Features Motor7.5 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 With motor7,5 kW 380 V 2900 rpm (Ex) InletDN 50 OutletDN32 Centrifugal Pumps MaterialPFA coating Information TypeMNK-XB/F 50-32-160 Mach.No.959813 Year of construction2004 Floorspace0,99 x 0,36 m Total height0,35 m Weight200 kg Extra SpecificationsAccording to the documentation, the pump set may be used in potentially explosive atmospheres and is classified as ATEX II 2G, temperature class T1–T4 (motor Ex de IIC T4).Centrifugal PumpsRichterPumps > Centrifugal PumpsBrand > Richter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

Printing plate development machine Fuji FLHZ 165 CD; infeed width 165cm; Interface Kit; High Pressure Kit; Chiller; Drip pan; Lay on Roller flushing section; Raised feet 80mm. Plate processor Fuji FLHZ 165 CD; working width 165cm; Interface Kit; high pressure kit; chiller; drip tray; lay on roller for water section; elevated foot 80mm.

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between table and slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Reference ID: PP-56409 Category: Folder Gluer Manufacturer: Jagenberg Model: Diana 165-4 Year Built: 1999 Color: - Impression: - Working Hours: - Speed: - Max. Size: 1650 mm Min. Size: - Condition: Good Location: Europe Availability: Immediately Machine Description: Automatic feeder unit Extended folding and transfer section Press/delivery section Conveyor-type delivery Linear rail-based manual adjustment elements Top control panel / operator panel Safety equipment (protective guards, emergency stop, etc.) Gluing line (glue application infrastructure available)

working length X: 1.600 mm working length Y: 800 mm working depth Z: 190 mm Workpiece dimensions: mm Workingpiece thickness from to: mm Motor output: 2,2 kW Number of axles: St. Number of milling agregates: St. Number of heads vertical: St. Number of heads horizontal: St. Overall size: mm Weight: ca. 450 kg Year: 2018 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU364X912 MakeFryma Koruma TypeDH V-160/400 LocationBarneveld Pressure Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume400 Ltr. Motor23 KW Specified Features - Processing vessel MaterialStainless steel 1.4571 (316Ti) Closed stirring vesselcheck Capacity300 l. (400 l.) Vessel sizesø 700 x 1300 mm Conical bottomcheck With covercheck Top connectionscheck OutletDN65 With jacketcheck (25 l.) Max. temperature180 °C With anchor stirrercheck Motor1,1 kW, 380 V, 1430 rpm Speed mixing shaft38 rpm With homogenisercheck Motor23 kW, 380 V, 500-3000 rpm Information No.4.789 Year of construction1991 Mounted on legscheck With switchgearcheck Floorspace2,00 x 1,20 m Total height2,44 m Weight950 kgProcessing vesselsFryma KorumaProcessing vessels > Processing vesselsBrand > Fryma Koruma What you can expect from Foe ...

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

General SKU403W1256 MakeLödige LocationBarneveld TypeFKM 1600 D Main Features MaterialStainless steel Volume1600 Ltr. Motor22 KW Specified Features - Powder turbo mixer Lödige mixercheck T-armscheck Capacity1600 ltr. Useful capacity400-1200 ltr. Trough sizesDia. 1100x1600 mm Top connectionsDia 250 and 450 mm Inspection hatch2x OutletDia. 330 mm With adjustable packing glandscheck Motor22kW, 380V,1465 rpm Speed mixing shaft119 rpm MaterialStainless steel 1.4306 (304L) Information No.9640 Year of construction1980 Floorspace,0x1,6 m Total height1,4m Powder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKU207S031 LocationBarneveld MakeJulabo Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information TypeFC-1600T Mach.No.10255538 Floorspace0,5x0,6 m Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU251U345 MakeGaf Filter Systems TypeRBN-1602-ACF06-D080D-00GDH-M No.12253 Year of construction1999 Mounted on framecheck Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface7.84 m2 Specified Features - Candle filter MaterialStainless steel 1.4571 (316Ti) Candle filtercheck Notified bodyTüV Filter surface7,84 m2 Number of candles16 Candle sizesDia: 183x585 mm Liquid outletDN80, DN50 Max. temperature170ºC Top connectionsDN50, DN1/2 Capacity908Ltr/ 980 kg Vessel sizesDia:1100x1070mm With jacketcheck 63 ltr Information LocationBarneveld Floorspace1,6x1,6 mtr Total height2,2 mtr Weight980 kgCandle filtersGAFFilters > Candle filtersBrand > GAF What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...

General SKU343T928 MakeAlexanderwerk LocationBarneveld CEcheck TypeG 1/100 Main Features Motor4 KW Specified Features - Roll compactor MaterialStainless steel 1.4401 (316) Roll compactors Granulatorcheck Roll sizesdia. 190x170 mm Number of dies available:1 Die perforation2 mm Number of press rolls1 Motor4,0 kW 230/400 Volt (Ex) With pre-mixercheck With motor0,37 kW With variable speed drive4,2-21 RPM Inlet440x380 mm Outletdia. 100 mm Information No.05132198 Year of construction2001 Mounted on framecheck With switchgearcheck Floorspace1,2x1,2 m Total height2,2 m Weight820 kg ATEX compatiblecheckRoll compactorsAlexanderwerkCompactors > Roll compactorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATL 550 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front - Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x fr ...

bore capacity in steel (diameter): 32 mm Short spindle: MK 3 bore depth: 175 mm spindle throat: 320 mm column diameter: 130 mm distance spindle /table: 140-790 mm feed: 0,1 - 0,16 - 0,25 m/min number of spindle speeds: 60-1600 weight of the machine ca.: 450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BIG pallet fork JCB Q-Fit 1600, - Beam width 1600 mm, - FEM 3, - Load capacity up to 4 t

pressure: 200 t table length: 2200 mm table width: 1550 mm dayligth: 2200 mm ram return capacity: 6.000 kg table load capacity: 10.000 kp total power requirement: ? ca. 25-30 kW weight of the machine ca.: 30 t dimensions of the machine ca.: 4 7 7 m Packing: ca. 13,4 x 3 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU254S201 LocationBarneveld MakeKSB (DE) TypeEtanorm SYA 032-160.1 Main Features MaterialCasted steel Volume8000 Ltr. Motor1.5 KW Specified Features - Centrifugal Pump MaterialMild steel Centrifugal Pumps Pumpcheck Capacity8 m3/h With motor1,5 kW 220-240/380-420 Volt With frequency inverterintegrated on the motor Inletdia. 40mm Outletdia. 30mm Information Mach.No.9970604208 000100 00 Year of construction2004 Floorspace1,0x0,3 M Total height0,5 M Weight130 KgCentrifugal PumpsKSBPumps > Centrifugal PumpsBrand > KSB What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Sheet width - max.: 200 mm Straightening roller diameter: 40 mm Number of leveling rollers: 5 Driven infeed and outfeed rollers Sheet thickness - min: 0.4 mm Sheet thickness - max.: 2.0 mm Weight: 170 Infinitely variable feed speed Clockwise and counterclockwise rotation Operating mode selector switch for manual and automatic operation Belt loop control very good condition

This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, its designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information.

General SKU254S199 LocationBarneveld MakeKSB (DE) TypeEtanorm SYA 032-160.1 Main Features MaterialCasted steel Volume8000 Ltr. Motor1.5 KW Specified Features - Centrifugal Pump MaterialMild steel Centrifugal Pumps Pumpcheck Capacity4 m3/h With motor1,5 kW 220-240/380-420 Volt With frequency inverterintegrated on the motor Inletdia. 40mm Outletdia. 30mm Information Mach.No.9970604209 000100 01 Year of construction2004 Floorspace1,0x0,3 M Total height0,5 M Weight130 KgCentrifugal PumpsKSBPumps > Centrifugal PumpsBrand > KSB What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

3 Containers - Power Generators MTU 16V4000G63 Total power in parallel operation: 6750 kVA Single power: 2250 kVA Year: 2015, installed in container 2023 Operating hours: approx. 1600 / 1600 / 2600 Cooling: Water with radiator Speed: 1500 1/min Tank: approx. 4600 liters Voltage: 400/231 V, 50 Hz Switchgear: Control DEIF AGC4-MK2, also for parallel operation, circuit breaker 4000 A Subject to prior sale - errors possible! Internal reference number: E-1004-109

General SKU300P635 LocationBarneveld MakeTool Temp Main Features Heating (medium)Electric Specified Features - Temperature control unit Temperating machinecheck TemperatureMax 90 grd water / 150 grd oil Information TypeTT-162E Floorspace0,8x0,3 M Total height0,9 M Weight120 KgTemperature control unitsTool-tempHeat exchangers > Temperature control unitsBrand > Tool-temp What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU289M331 MakeBuehler GmbH TypeCALYPSO SKV-1600 No.20 352 717 Year of construction1993 LocationBarneveld Specified Features - Roll breaker Roll breakercheck Roll sizesDia. 250x1600 mm Fluted rollscheck Inlet1600x150 mm Outlet1000x140 mm Motor1x 22 kW, 400/690 Volt, 1x 37 kW, 400/690 Volt Feeding by metering rollcheck Motor0,37 kW. 220/380 Volt MaterialMild steel Information With switchgearcheck Floorspace4,0x1,1 m Total height2,5 m Weight5400+1750+450 kg Extra SpecificationsWith output screw 22 KW, 400/690 voltsIncl. 4 new rollersRoll breakersBühlerBreakers > Roll breakersBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

General SKUR0933 MakePfaudler Werke GmbH Schwetzingen LocationBarneveld TypeKolonne 1600 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialGlass Volume10010 Ltr. Specified Features - Extraction Capacity10.010 Ltr Diameter1600 mm Length5800 mm Max. temperature200 °C. MaterialGlass - Enamel (WWG-9115) Information No.63584 Year of construction1999 Floorspace1,9x1,9 m Total height5,8 m Weight5.670 kg Extra Specificationswithout clamp screw ExtractionPfaudler-werkeColumns > ExtractionBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU245P306 MakeHosokawa Alpine Type160 UPZ No.6667 Year of construction1995 LocationBarneveld Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill Grinderplate beater Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Fine Impact Mills MaterialStainless steel Information Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterFine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

POREBA TCF 160 is a heavy-duty CNC horizontal lathe (turning machine) manufactured by POREBA Machine Tools, a Polish industrial machine tool builder. It’s part of the TCF series, which includes several sizes designed for machining very large, heavy workpieces such as shafts, rolls, and other long cylindrical components. Turning large shafts and heavy cylindrical parts, like those used in shipbuilding, power generation, mining, and heavy machinery. When equipped with optional tooling, it can also perform drilling and milling operations in addition to turning. Rigid construction with hardened guideways and heavy cast components for stability. Milling attachment 5,5 kW with Sk-40 taper Central lubrication Motorized tailstock 4 Chuck 1300 mm   CNC control SIEMENS 840D with following softeare options: MMC Easy Mask Spline interpolation Look Ahead Contour re-alignment  ...

current intensivity: 140 A plate thickness: 1,5 mm welding range: CO2: 35 - 225 A welding range: 30Ar+CO2: 30 - 250 A weight of the machine ca.: ca. 90 Kg dimensions of the machine ca.: 0,4 x 0,8 x 0,8 m Condition: ready for operation: Electric 380 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1600 kN

Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimeta ...

Machine: Horizontal automatic cartoner with reciprocating motion. Product: Blisters, strips, trays, rigid or flexible tubes, bottles, sachets, soap bars, and other food or cosmetic products. Materials: Cases with opposing or alternating flaps made of solid board with a basis weight ranging from 220 to 400 g/m², pre-scored and pre-glued. Closing: By tuck-in flaps or by hot glue applied using commercially available spray nozzles., Cadence / min: 20 to 140 cycles/min , Elec: 400 V / 50 Hz / 8.6 A , A + B (mm): max 140 , A (mm): min 15 / max 90, B (mm): min 12 / max 70 , C (mm): min 50 / max 200

General SKU201P114 LocationBarneveld MakeKSB TypeCPKN.C1.V 025-200 No.P.105.100 Main Features MaterialStainless steel Volume5000 Ltr. Motor5.5 KW Specified Features - Centrifugal Pump Pumpradial impeller Capacity5,0 m3/H (70m) With motor5,5 KW, 380-420/660-725 Volt (ATEX II 2 G Ex de IIC T4) Inletdia.40 mm Outletdia.25 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information Year of construction2012 Mounted on framecheck Floorspace1,1x0,4 M Total height2,1 M Weight150 KGCentrifugal PumpsKSBPumps > Centrifugal PumpsBrand > KSB What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

pressure: 040 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATL 550 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front - Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x fre ...

Key data: 1600 kN

Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/hp Built-in Arburg c ...