138,021 used machines on RESALE, but how to find them? Machine Search
Gear motor, electric motor -Speed: 22 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H190 mm -Weight: 24 kg
Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -divided -Tool: 82° -Dimensions: 165 x 47 mm -Total length: 2900 mm -Lengths: 200/300/400/500/500/1000 mm -Weight: 112 kg
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 800 mm -Lengths: 45/50/55/60/90/500 mm -Weight: 28 kg
Romaco-Siebler HM1/160 vertical strip packing machine for tablets, 3 lanes, maximum foil width 170 mm, includes format parts for tablets with dimensions of 7.2 x 5.6 x 17.5 mm and 11.4 x 6.31/WR8.5, foil reel core diameter 76 mm, maximum foil reel diameter 450 mm, Siemens SIMATIC S7-300, excellent working condition with only approx. 1600 running hours
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear motor, electric motor -Speed: 56 rpm -Power: 0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 400/200/H195 mm -Weight: 15 kg
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992
Long link roller chains, transport chain, roller chain, drive chain -per chain length: m -Pitch: 160 mm -1x chain: 5.1 m available -Weight 60 kg -1x chain: 3.5 m available -Weight 45 kg -2x chain: 9.92 m available -Weight: 81.5 kg/pc. -Price: 55 Eur/m -Weight: 9.5 kg/m
Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg
The scope of delivery includes: 01x Locking bracket, used Material colour: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "W" approx. 63 mm Bearing surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2,330 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Recon Part number: 554 050 03 01 554 051 01 01 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Three-phase motor, electric motor -Motor: unused -Voltage: 500 volts -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg
Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg
Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/330/H270 mm -Weight: 80 kg
Recon Part number: 554 050 02 01 554 050 00 01 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Panel saw, table saw, heavy precision circular saw, metal circular saw, cold circular saw -Sliding carriage: 200 mm -Speeds: 90-4000 rpm -Cutting width: 710 mm -Saw blade diameter: max. 260 mm -Max. Cutting height: 40 mm -Height adjustment -Transport dimensions: 1450/900/H1100 mm -Weight: 254 kg
Centrifugal pump, water pump -Delivery rate: 20-50 m³/h -Max. H: 14-9 mws -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection outlet: DN40 -Dimensions: 530/270/H300 mm -Weight: 45 kg
Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 160 mm -Piston diameter: 125 mm -Piston rod: 16 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available Unit price: 95 euros VAT -Dimensions: 140/140/H440 mm -Weight: 8.5 kg
Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
used
Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.
Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,
Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...
Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg
Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...
Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger
Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION
Gear motor, electric motor -Speed: 29.5 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Brake: 380 V -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 460/200/200 mm -Weight: 22 kg
Gear motor, electric motor -Speed: 11 rpm -Power: 0.18 kW -Brake: 380 V -Construction: angle B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Weight: 20 kg
Iseki ZM 160 S, intermediate axle mower (belonging to carrier vehicle unknown), built in 2002, incl. accessories shown: discharge plate, lifting shears, lifting cylinder with lifting shaft and lifting arms. More mowers and grass pick-up technology available! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...
Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.
sheet width: 0400 mm coil outside dia.: 1400 mm weight max. in kg: 3000 kg plate thickness: 0,80 - 4,50 mm nomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mm feed rolls: 2 exit pinch rolls: 2 coil width: 600 mm range of expansion ca.: 470 - 530 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table The data for this ad was created with ModulMWS - the software solution of ...
Electric motor, three-phase motor -Power: 18.5 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 600/320/H410 mm -Weight: 134 kg
LWB Steinl Injection Machine Type VCE -T 500/160 T Clamp power 500 KN Injection volume 160 cm3 Year 2006 6 Bar 400 v 50 hz 26 KW
One used book sewing machine Meccanotecnica Aster 160 Year of man.: 2000 Description: - Digital display - Optical sheet control - 4 4 opening possibilities Technical specifications: max. signature size. 320 x 420 mm min. signature size 75 x 150 mm max.number of stitches: 11 max. mechanical speed: 160 cycles/min
Key data: 18 KW, 13 1/min
Infinitely adjustable variator motor with belt variator
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg
Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Centrifugal pump, water pump -Type plate: unfortunately not available -Delivery capacity: 20-50 m³/h -Max. H: 14-9 mWs -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection output: DN40 -Dimensions: 540/290/H310 mm -Weight: 49kg
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Bezel, setting stick, lynette -Max. passage: Ø 160 mm -Peak height: 220 mm -Edition: Gray cast iron -technical drawing included with the photos -Dimensions: 450/100/H500 mm -Weight: 33 kg
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Key data: 5000 mm, 1600 mm
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Key data: 5000 mm, 1600 mm
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
maximum number of results exceeded
please refine your search
