flot used for sale

Offered out of insolvency is a ready-to-use tapping machine Manufacturer: Flott Model SB 15 GL Built in 1989 Masch.No.34177063 Specifications: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Projection 200mm Chuck Bilz WFP 1 + inserts Drill chuck Röhm 0-10mm Foot switch Digital display Pinolhub Single continuous cycle Emergency stop Speeds from 80-3150rpm 380 volts Motor power 0.75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs lead screw--pitch-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions Weight approx. 200kg

Key data: 700 mm, 400 mm, 400 mm

Manufacturer: Flott Type: BC 40 Super Year of Make: 2005 Tool holder: BT 40 Motor: 7.5/5.5 kW Spindle speed: 50-8000 rpm X-axis travel: 700 mm Y-axis travel: 400 mm Travel Z-axis: 400 mm

Key data: 16 mm

Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm

Key data: 13 mm

Bench drill Speeds 400 - 4800 rpm Height adjustable 15 cm Röhm Supra 1/32 - 1/2 Weight 35 kg 380 V 16 A

Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame

Standard equipment Main switch Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with CEE plug 3-year warranty for single-shift operation Specifications Continuous/normal drilling capacity (mm) 23/25 (in E335/ST60) Tapping capacity (pitch dependent) M16x1 Spindle MK III Drilling depth (mm) 115 Projection (mm) 260 Column diameter (mm) 110 Usable work surface (W x L) (mm) 420 x 340 T-slot size (arm), spacing (mm), dimension width (mm)Quantity 2, 125, 13/26 Speed display: digital Drilling depth display: digital Drilling depth stop: quickly adjustable stop ring Fee ...

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg

For sale is a used Schäfer & Flottmann tray erector with lateral insertion function for package inserts, package products such as e.g. Flower seed bags, etc., which are placed at the bottom of the tray. The tray is previously covered with an adhesive and can thus be fixed to the bottom of the tray. A vision system from Keyence uses the camera to check whether the products used have been positioned correctly. If not, the tray is ejected. In one of the following stations, products can either be inserted laterally or the tray is formed into an open tray. The Schäfer & Flottmann has run little and is in very good condition. There were 2 systems in stock and one of them has already been sold. There is a very extensive spare parts package worth about 150,000 € for the system

Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Sanding belt dimensions 150x2250 mm Grinding table dimensions 525 x 160 mm (without plate, the plate you can see in the photos was glued on) Table dimensions on pulley 320 x 280 mm Suction nozzle Ø 100 mm Motor power 1.1 kW Connected loads 400 V, 50 Hz, 3~, 2.5 A Dimensions: 1,400 x 400 x 1150 mm

spindle cone: MK 1 turning speeds: 200 - 3000 U/min table-size: 300 x 220 mm total power requirement: 520 W weight of the machine ca.: 200 kg dimensions of the machine ca.: 8004001800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103760 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 90.0 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with rob ...

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the

Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Total height: 1100 mm Weight: approx 150 kg

width of the strips: 150 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 100 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible ext ...

Column Drill FLOTT 32 STG Year of Make: 1992 Drilling capacity in steel 32 mm Clamping surface table 500 mm x 360 mm Drilling depth adjustment with digital display Drilling depth 150 mm Spindle mount MK 3 Spindle speeds 140 rpm – 1400 rpm infinitely variable with digital display Drill Table Lighting

Spindle Holder MK 2 Drilling capacity in steel: 15.0 mm Stepless speed adjustment with digital display Digital depth display

Spindle mount MK 3 Drilling capacity in steel: 23 mm

bore capacity in steel (diameter): . mm throat: . mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mm throat: . mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mm throat: . mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU429U1376 LocationBarneveld MakeFlottweg TypeZ42 Z3L No.F 738 Year of construction1978 Main Features MaterialStainless steel Motor22 KW Specified Features - Decanter 3-Phase decantercheck Screw diameterMax. 420 / min. 226 mm Screw length1245 mm InletDia. 46 mm Liquid outlet110 mm Solids outlet700 x 260 mm Motor18,5/22 kW, 400 volt With variable speed drive1465/2935 rpm With hydraulic unitcheck Motor11 kW, 380 volt, 1460 rpm MaterialStainless steel 1.4307 (304L) Information Mounted on framecheck With switchcheck With switchgearcheck Weight3000 kg Floorspace1,4 x 2,8 m Total height2,1 mDecantersFlottwegCentrifuges > DecantersBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

bore capacity in steel (diameter): 18 / 23 mm bore depth: 100 mm throat: 240 mm Spindle Speed: 250 - 4000 U/min. table surface area: 340 x 280 mm machine weight ab.: 205 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU246T365 MakeFlottweg TypeZ 4D-4/454 No.006.047.00 LocationBarneveld Main Features MaterialStainless steel Motor30 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter420/267 mm InletDN80 Liquid outletDN200 Solids outlet572x242 mm Motor30 kW 400 Volt With hydraulic unitcheck Motor4 kW 380-420 Volt Max. rotor speed3500 rpm MaterialStainless steel 1.4462 (Duplex2205) Information Floorspace3,5x1 m Total height1 m Weight2200 kgDecantersFlottwegCentrifuges > DecantersBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.

: 95 mm Short spindle: MK 2 spindle turning speed range: 100 - 4200 UpM throat: 200 mm feed: von Hand weight of the machine ca.: 81 kg Overall size: 650x300x850 mm Standard equipment: - Number of speed ranges 10 steps - Movable LED machine light - Swivel work table +/- 45 degrees - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - In accordance with current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU366X870 LocationBarneveld CEcheck MakeFlottweg TypeC 4E-4/454 Main Features MaterialStainless steel Capacity40000 Ltr./Hr. Motor37 KW Specified Features - Decanter Decantercheck Screw diameter470 mm Screw length2100 mm InletDia. 65 mm Liquid outletDia. 150 mm Solids outlet600x300 mm Motor37 kW 400 V 3000 rpm: 7,5 kW 400V 1500 rpm Max. rotor speed3400 MaterialStainless steel 1.4408, Stainless steel 1.4463, Stainless steel 1.4571 (316Ti) Information No.017.078.17 Year of construction2012 Mounted on foundation platecheck Floorspace3,50 x 1,20 m Total height1,10 m Weight2700 kg Extra Specifications Rotor Max. rotational speed: 3400 rpm Max. sediment density: 1.3 g/cm³ Drum inner diameter: 470 mm Discharge diameter: 240 mm Min./max. product temperature: 0 / 60°C Product-contacting materials Drum: 1.4463 – TI-QUA-0002 Other parts: 1.4408 / 1.4571 Se ...

General SKU251W326 MakeFlottweg LocationBarneveld CEcheck TypeZ53-4/454 Main Features MaterialStainless steel Capacity70000 Ltr./Hr. Motor55 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameterDia. 330 mm Screw lengthCa. 1900 mm Inletcheck dia. 65 mm Liquid outletcheck Solids outletcheck Motor55+5,5 kW, 400 volt Max. rotor speed3100 rpm MaterialStainless steel 1.4463 Information No.007.214.05 Year of construction2001 Mounted on framecheck Mounted on foundation platecheck With switchgearcheck (as is) Floorspace1,70x3,90 m Total height1,10 m Weight6800 kg Extra SpecificationsDrum dia. Inside 529 mm : max work temperature 100°C max drum speed 3100 rpm max sediment: 1,5 g/cm3 capacity: 35-70m3/h Technical specs Extra informationDrum inside Dia. 529 mm, drum length 1750 mm, max work temperature 100°C, DecantersFlottwegCentrifu ...

taper MK: 2 : ja weight of the machine ca.: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used double-belt press with a stainless steel frame made by Flottweg, type: PD10000. Electrically driven with infinitely variable speed control. Belt width: 1200mm. Integrated belt cleaning with high-pressure water. Brush cleaning for the upper belt. Pneumatic and infinitely variable belt mounting and adjustment. Replaceable dosing box. Main motor power: 5.5kW. Brush motor power: 1.1kW. Hourly capacity: 10,000 kg, depending on fruit type and ripeness. Weight: 1.8 tons. Electrical power supply: 400V/16A/12kW. Required air pressure: 8-10 bar.

taper MK: 1 bore capacity in steel (diameter): - mm weight of the machine ca.: 140 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various smaller workshop metalworking machines from various manufacturers are available. 1) Brush machine RSA STL, year of manufacture: 1979. 2) Belt grinder Flott BSM 75. 3) Pull saw Graule ZS 85, year of manufacture: 1994. 4) Belt grinder Ludwig Gartner AZ2N. 5) Band saw Raim 360, year of manufacture: 1995. 6) Column drilling machine Quantum B 30 GS, year of manufacture: 2005. 7) Belt grinding machine HM TAS 75, year of manufacture: 2000. 8) Assembly band saw Berg & Schmid PBS 148. 9) Pull saw Graule ZS 200 N-S, year of manufacture: 2015. 10) Aluminum circular saw MEP Cobra 350 MA. 11) Notching saw Graule AS 450-D, year of manufacture: 2003. 12) Corner crimping press Rapid HP-205, year of manufacture: 1995. 13) Hydraulic press Schüco. 14) Notching saw Graule AS 450, year of manufacture: 2000. 15) Tie bar punching machine Schüco LA 10, year of manufacture: 2020. An on-site inspection  ...

Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

: neu : 2025 : .00775 : prompt, Zwischenverkauf v : 949.81 € : 1 : 150 mm : 40 mm : 33 kg Vice [felix] 2.0 150 Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Taper mandrel B18/MK IV Reducing sleeve MK III/MK II Reducing sleeve MK III/MK I The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Drilling machine, drill press, pillar drill, column drill -Manufacturer: Flott, column drill type SB 23 pieces -Speed speeds: 200 - 2000 rpm, continuously variable via variator disc -Table size: 300 x 300 mm, travel 595 mm -Spindle holder: MK3 with drill chuck -Spindle stroke: 150 mm -Throat: 295 mm -Column: Ø 110 mm -Dimensions: 920/450/H1920 mm -Weight: 345 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, Pillar drill type 23 mm -Spindle mount: MK3 -Motor: 1.1 kW -Speed adjustment: via V-belt -Speeds: 200 - 2000 rpm -Table size: 300 x 300 mm -Travel distance: 440 mm -Spindle stroke: 145 mm -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 900/450/H1900 mm -Weight: 306 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, pillar drill type SB 32 ST-FB suitable for flowdrill -Spindle mount: MK3 -Motor: 3.0 kW -Speed adjustment: stepless with digital display -Speeds: 80 - 4000 rpm -Table size: 500 x 360 mm -Travel distance: 450 mm -Spindle stroke: 160 mm with digital display -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 940/590/H1920 mm -Weight: 367 kg

: neu : 2025 : 00774 : prompt, Zwischenverkauf v : Deutschland : 523.41 € : 1 : 100 mm : 32 mm : 12 kg Vice [felix] 2.0 100 Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Taper mandrel B18/MK II Reducing sleeve MK II/MK I The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 € : 300 x 40 x 51 mm : 2,2 kW : 1250 1/min : 42 mm : 540 mm : 530 mm : 1180 mm : 800 x 600 x 1400 mm : 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 030140 : prompt, Zwischenverkauf v : Deutschland : 13429.36 € : 257.84 € : 1 : 30 mm : MK 3 : 280 mm : Stufe 1: 125 - 4000, Stuf U/min : 0,9 / 1,45 kW kW : M20 : 820 mm : 520 mm : 1900 mm : 320 kg : 0 - 300 mm/U : 240 - 790 mm : 420 x 340 mm : 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off, programma ...

FLOTT SB 25 STV column drill press was built in 1991 in Germany by Arnz Flott GmbH Werkzeugmaschinen. This extremely efficient machine enables the drilling of precise holes with a maximum diameter of 25 mm in steel and a maximum diameter of 30 mm in cast iron. The machining process is performed by a work head with a reliable spindle, rotating at a maximum speed of 2000 rpm. As many as 6 spindle speed adjustment stages enable precise adjustment of the parameters to the type of workpiece. The work table, in turn, has height adjustment and can be fully rotated around the column. All this makes the FLOTT SB 25 pillar drill the perfect solution for production plants and workshops. The total weight of the machine is approximately 300 kg. Technical specifications of FLOTT SB 25 STV drilling machine - maximum drilling diameter (cast iron): 30 mm - maximum drilling diameter (steel): 25 mm - ...

: neu : 2025 : .00772 : prompt, Zwischenverkauf v : 341.12 € : 1 : 80 mm : 28 mm : 12 kg Vice [felix] 2.0 80 Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm) Taper mandrel B16/MK II Reducing sleeve MK II/MK I The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 880.52 € : 150 mm : 40 mm : 200 mm : 33 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.