floor used for sale

floor scrubber Brand: Kremer Type: KRFL50-A Function: Scrubbing and drying in 1 cycle Capacity: 2000 m² per hour Equipped with: adjustable brush pressure Brush diameter: 510 mm Brush speed: 175 revolutions per minute Holding tank: 50 litre holding tank Clean water tank: 50 liter clean water tank Number of motors: 2 motors Power: 2 x 500 watts Battery: 24 V / 100 Ah battery Including: battery charger available Manual: manual available Weight: 160 kg Condition: Unused in the original packaging Auction-ID: A3-43511-467

not in working condition, for spare parts or repair Auction-ID: A7-45452-64

Self-propelled floor scrubber Function: Scrubbing and drying in 1 cycle Capacity: 4500 m² per hour Equipped with: Adjustable brush pressure Brush diameter: 560 mm Floor squeegee: 800 mm Maximum speed: 5.5 km/h Brush speed: 170 revolutions per minute Holding tank: 70 litres Clean water tank: 70 litres Number of motors: 3 separate motors Battery: 24 V / 100 Ah Battery charger: Built-in battery charger Manual: Manual available Weight: 200 kg Condition: Unused in the original packaging Auction-ID: A3-43511-466

Digital scale with plate: 800x800mm maximum capacity: 300 Kg Minimum capacity: 2 Kg; division into 100gr. Serial: 05-286/H Estimated weight: 70 kg Approximate dimensions: 800x800x400 mm Auction-ID: A7-44996-105

CONTROLS   CNC controls NUM 1060 M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 2   X-axis travel: 3000 mm   Y-axis travel: 2010 mm   Z-axis travel: 2000 mm   rotating range A-axis from: 92.5 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1450 mm   table surface (front-back): 1600 mm FLOOR PLATE   total weight approx.: 12000 kg SPINDLE / HEAD   spindle revolutions (max): 3000 /min   tool fixture: ISO SK 50   drive power: 37 kW AXIS DRIVES   traverse velocity X (max): 25000 mm/min   traverse velocity Y (max): 25000 mm/min   traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENT ...

Daewoo Floor Cleaning Machine: Packed with battery and charger Theoretical surface cleaning: Capacity: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working range inclination: 2 % Fresh/waste water tank volume: 50/ 50 L Connection voltage 230 V Battery 24V / 100Ah Brush diameter 510 mm Speed 175 rpm Suction power air 24 L / s Tank volume 50 / 50 litres Weight 160 kg Dimensions L-W-H 1.1 x 0.52 x 1.0 m Condition: never used / new (5) Auction-ID: A7-45761-878

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-32

Self-propelled floor scrubber Function: Scrubbing and drying in 1 cycle Capacity: 4500 m² per hour Equipped with: Adjustable brush pressure Brush diameter: 560 mm Floor squeegee: 800 mm Maximum speed: 5.5 km/h Brush speed: 170 revolutions per minute Holding tank: 70 litres Clean water tank: 70 litres Number of motors: 3 separate motors Battery: 24 V / 100 Ah Battery charger: Built-in battery charger Manual: Manual available Weight: 200 kg Condition: Unused in the original packaging Auction-ID: A3-43515-466

KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Capacity: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working range inclination: 2 % Fresh/waste water tank volume: 50/ 50 L Connection voltage 230 V Battery 24V / 100Ah Brush diameter 510 mm Speed 175 rpm Suction power air 24 L / s Tank volume 50 / 50 litres Weight 160 kg Dimensions L-W-H 1.1 x 0.52 x 1.0 mm Condition: never used / new (5) Auction-ID: A7-45761-798

floor scrubber Brand: Kremer Type: KRFL50-A Function: Scrubbing and drying in 1 cycle Capacity: 2000 m² per hour Equipped with: adjustable brush pressure Brush diameter: 510 mm Brush speed: 175 revolutions per minute Holding tank: 50 litre holding tank Clean water tank: 50 liter clean water tank Number of motors: 2 motors Power: 2 x 500 watts Battery: 24 V / 100 Ah battery Including: battery charger available Manual: manual available Weight: 160 kg Condition: Unused in the original packaging Auction-ID: A3-43515-467

No charger, blade width 800mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-43

spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm Speed of boring spindles:1,25 - 1250 U/min. ram stroke:700 mm dimension of the ram:340 x 340 mm mm spindle taper ISO:50 rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m CNC control Siemens 840 Dsl completely modernized 2010 FIBRO CNC drilling work table 2500 x 2500 mm 50 to. workpiece weight Longitudinal travel 2500 mm Angular milling head 4 x 90° Universal angular milling head Panel area approx. 10000 x 5000 mm Chip conveyor and coolant device Aerostatic guides

spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped.

spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm ram stroke:700 dimension of the ram:340 x 340 mm spindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min. feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment