floor plates used for sale

Printing plate development machine Kodak (G+J) T-HDX 165; cleaned and tested; Working width 1650mm; 2 brushes; suitable for negative and positive printing plates; Chiller. Plate processor Kodak (G+J) T-HDX 165; cleaned and checked; working width 1650mm; two brushes; used for negative and positive plates; Chiller.

Hold down belt, circulation pump, sediment removal, oil level control, manual hoists, prepared for CO² fire extinguisher, Belt width: 400 mm, Frying length: 3000 mm, Heating: electric, 66 kW, Power: 3 x 400V, 50 Hz, 72kW, Dimensions: 5400 x 1650 x 3150 mm, Weight: 2450 kg

Hold down belt, sediment removal, circulation pump, oil level control, Prepared for CO2 fire extinguisher, Belt width: 600 mm, Frying length: 3000 mm, Heating: thermal oil, 90kW, Power: 3 x 380V, 50Hz, 3.6kW, Dimensions: 5650 x 1800 x 3450 mm, Weight: 2150 kg

Automated Clean In Place (CIP), Continuous hot water, single pass, belt washer, With Stein Humitroll moisture monitor and control, Belt width: 40 inch, 1010 mm, Heating: thermal fluid, 2 x 460kW, Steam: max 2 x 545 kg/hr, Compressed air: 6 - 10 Bar, Power: 3 x 400V, 50Hz, 63kW, Dimensions: 22500 x 3000 x 3000 mm

Teflon infeed, hold down belt, circulation pump, oil level control, sediment removal, electric hoists, prepared for CO2 fire extinguisher, Including separate infeed belt, Machine delivered with CFS VTC1100-194 oiltank and oilpump, Belt width: 500 mm, Frying length: 3000 mm, Heating: electric, Power: 3 x 380V, 50Hz, 72kW, Weight: 2500 kg, Dimensions: 6300 x 1700 x 3100 mm

Hold down belt, sediment removal, circulation pump, electric hoists, oil level control, Prepared for CO2 fire extinguisher, Belt width: 600, Frying length: 4500 mm, Heating: thermal oil, 214kW, Power: 3 x 380V, 50Hz, 10kW, Dimensions: 7400 x 1900 x 3150 mm, Weight: 2750 kg

Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, prepared for CO2 fire surpression system, Belt width: 630 mm, Frying length: 5000 mm, Heating: thermic oil, 250kW, Power: 3 x 400V, 50Hz, 11kW, Dimensions: 9100 x 1900 x 2900 mm

: . length: 2200 mm plate width: 1500 mm plate height: 880 mm : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2,5 t weight of the machine ca.: 80 kg : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2.000 mm plate depth: 3.000 mm plate height: 600 mm weight of the machine ca.: 6 t : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 221 mm length in total: 1.000 mm weight of the machine ca.: 300 kg : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 1.400 mm plate depth: 1.600 mm plate height: 310 mm weight of the machine ca.: jeweils 2,5 t 2 available: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 600 mm width: 400 mm height: 100 mm weight of the machine ca.: 200 kg : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material: Marmor plate width: 2.500 mm plate depth: 700 mm plate height: 250 mm weight of the machine ca.: 2 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 500 mm plate depth: 800 mm plate height: 50 mm no. of flutes: 6 weight of the machine ca.: 140 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 2500 mm floor-plate width: 1800 mm floor-plate height: 600 mm The material on the tabletop is not included in this offer. Steel feet can be purchased as an option. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2500 mm width: 1500 mm Thickness: 300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Under table with drawers and compartments The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 2000 mm floor-plate width: 1500 mm floor-plate height: 260 mm T-slots: 22/40 mm number of T-slots: 7 dist. T-slots long.: 200 mm dist. T-slots cross: 200 mm weight of the machine ca.: 1,50 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mm width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m 2 measuring plates 1x 1,200 x 4201x 1,400 x 500 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 12000 mm table width: 8000 mm table height: 800 mm Thickness of the plate: 300 total power requirement: kW weight of the machine ca.: 82,5 t dimensions of the machine ca.: 12x8 m 8 available All 8 panels measure 8000 x 12000 mm. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

floor-plate length: 1800 mm floor-plate width: 1600 mm floor-plate height: 160 mm width of T-slots: 28/48 mm T - slots distance: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mm table width: 550 mm Thickness: 170 mm number of T-slots: 5 T-slot - width: 18 mm T-slot - distance: 110 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m table load: t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 900 mm table width: 600 mm Thickness: 100 mm number of T-slots: 8 T-slot - width: 12 mm T-slot - distance: 80 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m table load: t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: . kg taper MK: . Item clamping claws 100-300 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: . kg taper MK: . Clamping system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

consisting of two plate dimensions: 520 x 360 x 60 mm incl. clamping device Auction-ID: A7-49089-205

length: 1000 mm width: 750 mm Equipment: - Measuring plate with T-slot - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm weight: 177 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm For clamping on Premium Light with a clamping bolt if the spacer ring article no. 280653.N required. including 28 mm perforated plate (light): - Premium Light - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Material thickness 15 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 3500 mm plate depth: 2000 mm plate height: 360 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 4000 mm width: 2000 mm weight of the machine ca.: 8,5 t height: 400 mm Price 1,000 euros per square meter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mm width: 1000 mm table height: 850 mm weight of the machine ca.: 1,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mm width: 1000 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm plate depth: 3000 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 400 mm width: 150 mm total power requirement: 24 V weight of the machine ca.: ? t dimensions of the machine ca.: 800 150 180 m Sine table with 24 V electromagnetic plate, swivelling over the longitudinal axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mm width: 2000 mm height: 350 mm total power requirement: - kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 220,9 m Sonderpreis EXW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 200 mm height: 90 mm Pole pitch: Radial Polteilung 4-teili mm total power requirement: 0,048 kW Shipping weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Large set of clamping and assembly tools consisting of fixing plates, clamping cubes, precision brackets, machined blocks and positioning accessories. Set suitable for precision mechanics workshops, CNC machining centers, toolmaking, dimensional control or realization of specific assemblies. Interesting lot for industrial users, technical schools, methods offices and dealers of professional equipment. Content included according to photos. Auction-ID: A1-48554-415

Set consisting of circular clamping plates, fixing plates and numerous clamping accessories for machine tools and production equipment. The set includes precision clamping jaws, fasteners, brackets and mechanical components. Equipment suitable for machine shops, precision mechanics, industrial manufacturing and workstation equipment requiring robust clamping solutions. Content included according to photos. Auction-ID: A1-48554-419

Lot including various aluminium parts and metal components with die-cut plates, machined elements, large square profile and large stock of small fasteners or assembly parts. Set suitable for mechanical manufacturing, prototyping, machining, metal construction or material recovery. Sold in one lot with all the elements visible in the photographs. `` Auction-ID: A1-48554-262

Functional platesetter, year of manufacture approx. 2000, little used, good condition, only for collection. Base cabinet for plates/films can be provided.

Key data: 500 mm, 200 mm

Magnetic clamping plate with sinusoidal ruler swivel device. Top condition! Dimensions : 500x200mm, Clamping: 110V - Made in Germany

1500 x 2500 surface plates complete with 2 feet cube not included Auction-ID: A1-48745-36

Steel Storage Structure for Plates and Materials Type: Structure for storing plates and materials Material: High-strength structural steel Profiles: Welded rolled or tubular steel sections Construction: Reinforced structure with horizontal and vertical bracing Finish: Anti-corrosion paint or epoxy coating Height: 2,000 mm – 4,000 mm Width: According to number of storage bays Depth: Adapted to sheet dimensions Capacity per level: Variable (e.g., 1,000 kg – 5,000 kg per compartment) Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-45

a total of 10 castors (9 of them with mounting plate), see photos for more details Auction-ID: A7-49942-1044

For sale are 2 solid tool or adapter clamping plates made of tool steel, which were used on an ENGEL duo 600 injection moulding machine. The plates were used to hold and fasten injection moulds and are accordingly designed for industrial use in injection moulding as well as in tool, mould, machine and fixture construction. Technical data / scope of delivery: Quantity: 2 pieces Origin: ENGEL duo 600 injection moulding machine Material: solid tool steel Centering: Ø 200 mm Dimensions: approx. 800 × 650 × 120 mm per panel Total weight: approx. 800 kg Various existing fastening, mounting and threaded holes Sold exclusively as a complete set of 2 clamping plates Due to their solid design and existing machining, the plates are particularly interesting for further use as tool/adapter clamping plates, but also for individual applications in tool, mold, machine and fixture construction. ...

Heating: gas, 28kW, Burners: 14 pieces, Capacity: max 400 kg, Skewer size: max 700 mm diameter, Skewer height: max 1150 mm, Power: 220V, 50Hz, 1.5kW, Dimensions: 1200 x 1250 x 2350 mm

- Specifications and quantities: see photos. Auction-ID: A1-49374-20

- 20x size 280x207cm, thickness 10mm. - 3x size 305x130cm, thickness 18mm. - 1x size 130x62cm, thickness 18mm. - 1 x size 87x75cm, thickness 18mm. Auction-ID: A1-49374-61

- Specifications and quantities: see photos. Auction-ID: A1-49374-21