floor plates used for sale

Auction-ID: A1-51439-223

Auction-ID: A1-51439-205

Sold without blade. Auction-ID: A1-51439-222

Equipped with topsail, hydraulic oil pump generator, 400 volts. 1x cross conveyor, including the transport auger from the elevator, length approximately: 10 meters, 1x elevator transport auger to the top of the hammer mill. This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-17

LED Dance Floor Parts & Extension Kit – 12 Panels – Controller – 3 Cable Sets – Edges & Feet Specifications: Number of LED Dance Floor Panels: 12 Pieces Number of edge parts: 10 pieces Number of corner pieces: 2 pieces Number of feet / supports: 21 pieces Number of cable sets: 3 pieces Controller with adapter: 1 piece Case: 1 piece Features: Modular LED Dance Floor Panels Interconnectable panels Integrated LED lighting Different colors and light patterns Controller for controlling the lighting Cabling for connecting the panels Edge and corner parts for floor finishing Loose feet / supports for the assembly Various connection cables and accessories as shown Particularities: The LED dance floor is connected and tested; The video shows that the lighting is working and different colors and patterns are displayed. Not every single LED point and function ha ...

103 Layher Allround scaffolding sections – reinforced U-beams and floor locks 2.57 m – 2 stacking frames Specifications: Brand: Layher System: All-round Number of reinforced U-beams: 38 pieces Length of U-beams: approx. 2,570 mm Number of U-floor locks / decking lock plates: 65 pieces Length of floor locks: approx. 2,570 mm Total number of Layher scaffolding parts: 103 pieces Material: galvanized steel Features: Reinforced steel profile construction Layher Allround System Connections U-floor locks / decking sheets for securing suitable scaffolding floors against lightening Various original Layher markings 2 stacking/transport racks Particularities: Used condition with normal signs of use, paint, weather and storage Bundled and sorted for transport Forklift available to load the complete lot This lot consists exclusively of 38 reinforced Layher U-beams of  ...

84 Layher Allround steel scaffolding floors – 1,500/1,000 × 320 mm – tube support Specifications: Brand: Layher System: All-round Type: steel scaffolding floor / scaffolding grid Quantity: 84 pieces 51 pieces with dimensions approx. 1,500 × 320 mm 33 pieces with dimensions approx. 1,000 × 320 mm Material: galvanized steel Execution: pipe bearing Features: Perforated non-slip walking surface Integrated support hooks at the ends Various original Layher manufacturer/identification labels Version for professional scaffolding construction Particularities: Bundled and stacked for transport Forklift available to load the lot PLEASE NOTE: this lot consists exclusively of the 84 pieces mentioned above: 51 pieces of approx. 1,500 × 320 mm and 33 pieces of approx. 1,000 × 320 mm. Other scaffolding parts, floors, grids, stacks, frames and other materials that ma ...

Spare parts LED Dance Floor – 5 panels 1,000 × 1,000 mm – controller – cable set Specifications: Number of floor panels: 5 pieces Dimensions per panel: approx. 1,000 × 1,000 mm Total panel area: approx. 5 m² Construction: Aluminum frame construction Features: Integrated LED lighting Black transparent/glazing at the top with integrated light points Modular interconnectable floor panels 1 pcs controller / control Adapter/Power Supply for Controller Cable set Various connection and connection cables as shown Particularities: This lot is primarily offered as a spare/parts set for the other LED dance floors in this auction. The panels, controller and cabling can be used for replacement, repair or possible expansion of an existing floor. Also see lot 2209 and lot 2210, in which additional dance floor/stage floor parts and accessories are offered. Delivered a ...

91 Layher U-Stahlboden T4 scaffolding floors – 2.07 × 0.32 m – load class 6 Specifications: Brand: Layher Type: U-Stahlboden T4 / U-Steel Deck T4 Article number: 3812.207 Quantity: 91 pieces Layher system size: 2.07 × 0.32 m Weight: approx. 15 kg each Total theoretical weight: approx. 1,365 kg Load class: class 6 Material: hot-dip galvanized steel Features: Perforated non-slip walking surface Integrated suspension at both ends Original Layher manufacturer/tax labels Particularities: Used condition with normal signs of use, paint, weather and storage Bundled and stacked for transport Forklift available to load the lot This lot consists exclusively of 91 pieces of Layher scaffolding floors as described above Any other scaffolding parts, materials, stacks or other goods visible in the photos do not belong to this lot No more than 91 pieces will be delivere ...

6 aluminium dance floor/stage elements – 2,000 × 1,000 mm – 12 m² – including clamps and transport trolley Specifications: Number of floor/stage elements: 6 pieces Dimensions per element: approx. 2,000 × 1,000 mm Surface area per element: approx. 2 m² Total floor area: approx. 12 m² Sturdy aluminum frame construction Dark textured/non-slip floor plates Modular design; Elements can be linked together Features: 6 adjustable metal connecting clamps Clamps for interconnecting and fixing the elements Aluminum storage/transport cart Transport trolley with swivel wheels Elements can be stored compactly in the transport cart Particularities: This concerns lot 2209. Lot 2210 also consists of a dance floor. When purchasing both lots, the floors can be combined into a larger floor arrangement. Lot 2211 consists of various spare parts for the dance floor. Used ...

17000661 Used and untested Auction-ID: A7-51504-90

18000875 Used and untested Auction-ID: A7-51504-54

19000557 Used and untested Auction-ID: A7-51504-56

24000397 Used and untested Auction-ID: A7-51504-73

Ref. -No.: 10663 Manufacturer: UNION Year of construction: 2003 Type of control: CNC Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 3000 mm Z-Travel: 1000 mm W-Axis: 700 mm V-axis: 1500 mm B-Axis: 360 ° Bore Spindle Diameter: 150 mm Number of gear stages: 2 Max. Tool Weight: 30 kg Max. Tool Length: 500 mm Workpiece Diameter At Full Load: 125 mm Workpiece Diameter With 2 Vacant Positions: 250 mm Turning Speeds: 2800 RPM Max. Torque On The Boring Spindle: 1751 Nm Max. Torque: 2415 Nm Rapid Traverse X-Axis: 15 m / min Rapid Travel Y-Axis: 15 m / min Rapid Traverse Z-Axis: 15 m / min Rapid Traverse (W-Axis): 15 m / min Table surface: 2000 x 2500 mm Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement. UNION PCR 150 CNC 840 D – horizontal boring ...

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1500W; self-driven; battery monitor; light; speed regulator; horn; Charger; manual; Auction-ID: A1-51257-567

Softwood floor planks with a working size of 28×135×2150 mm, suitable for indoor application. The boards are equipped with a GG profile (groove/groove) and are connected to a separate fish mouth, which ensures neat alignment and stable assembly. The beams are pressure impregnated (KDI) and colored brown. Auction-ID: A1-45127-2265

disk brush 350mm; squeegee width 450mm; clear water tank 20L; Recovery 25L; work capacity 1350m/h; Voltage 24V; Power 900W; brush disk motor 400W; suction motor 500W; battery monitor; Charger; manual; key-card; Auction-ID: A1-51257-564

Engine: Reliable Honda GX-390 single-cylinder petrol engine (approx. 8.7 kW / 11.8 hp) Max. cutting depth: Up to 200 mm (infinitely adjustable via the large handwheel) Max. saw blade Ø: 500 mm (blade bore 25.4 mm as standard) Feed: Manual by push bracket Auction-ID: A1-51523-39

unused; in cardboard box; Battery voltage: 24 V; Power: 550 W; Continuous working time: 4-5 hours ; Clean water tank: 45 L Capacity; waste water tank: 50 L; Cleaning efficiency: 2500 m²/h ; Suction diameter: 830 mm ; Brush pressure: 30 kg ; Suction power: 12 KPa ; IP degree: IPX4; Weight: 145 kg; self-driven; digital display; v.v. password; 8553 Auction-ID: A1-51257-412

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; Auction-ID: A1-51257-565

Power: 2200W (2.2kW) Speed: 1420 rpm (revolutions per minute) Degree of protection: IP 55 (dust and water jets protected) Auction-ID: A1-51523-33

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; Auction-ID: A1-51257-566

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-51257-406

Unused in packaging; suitable blade size 350-500mm; 13HP; maximum depth 17cm; Rotation lever for height adjustment; 40L water tank; without saw blade; unused; 6529 Auction-ID: A1-51257-323

GE Dinamap Carescape V100 – Multiparameter Floor-Standing Monitor Manufacturer: General Electric Model: Dinamap Carescape V100 Non-invasive blood pressure measurement with GE's exceptional DINAMAP technology Ability to set initial inflation pressures, allowing you to adapt to each patient's specific case and ensure comfort Large display makes it easy to read, even from a distance Capable of storing up to 40 measurements over a period of up to 24 hours, with the ability to print tables Designed for easy maintenance with a removable panel for easy access and easy-to-use on-site replacement kits NIBP (Non-Invasive Blood Pressure Measurement) specificationsCuff Pressure Range 0 to 290 mmHg (Adult/Pediatric) (Normal Operating Range) 0 to 145 mmHg (Newborn) Blood Pressure Accuracy NIBP Algorithm Mean Error ≤5 mmHg,Classical and Auscultatory Mean Error ≤5 mmHg,Standard Deviation ...

floor scrubber Brand: Kremer Type: KRM350 Function: Scrubbing and drying in 1 cycle Capacity: 1520m² per hour Brush diameter: 380 mm Holding tank: 35 litre holding tank Clean water tank: 30 liter clean water tank Number of motors: 2 motors Battery: 24 V / 52 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A1-40901-300

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-27

4 steered castors, braked version, ESD suitable Auction-ID: A1-51646-37

608m Floor PVC mask Floor PVC mask Beech H-100 Smooth. Floor mask 09 White/Syginge H-100. Plum floor mask. Floor mask Cherry. Auction-ID: A7-40559-26

Suitable for small load carriers 600x400 mm, stackable, 2 steered castors and 2 rigid castors, ESD compatible, max. load capacity 250 kg Auction-ID: A1-51646-40

Suitable for small load carriers 600x400 mm, stackable, 2 steered castors and 2 rigid castors, ESD compatible, max. load capacity 250 kg Auction-ID: A1-51646-34

floor scrubber Brand: Kremer Type: KRM350 Function: Scrubbing and drying in 1 cycle Capacity: 1520m² per hour Brush diameter: 380 mm Holding tank: 35 litre holding tank Clean water tank: 30 liter clean water tank Number of motors: 2 motors Battery: 24 V / 52 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46115-1356

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-23

464m PVC sill. PVC molding I-X. PVC molding BEECH. PVC molding 03 white/black. PVC molding 04 white/brown. Auction-ID: A7-40559-28

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-20

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-19

floor scrubber Brand: Kremer Type: KRM30 Function: Scrubbing and drying in 1 cycle Capacity: 1350 m² per hour Brush diameter: 350 mm Holding tank: 15 litre holding tank Clean water tank: 10 liter clean water tank Number of motors: 2 motors Battery: 24 V / 32 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46115-1355

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-25

4 steered castors, braked version, ESD suitable Auction-ID: A1-51646-33

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-26

4 steered castors, braked version, ESD suitable Auction-ID: A1-51646-31

Suitable for small load carriers 600x400 mm, stackable, 2 steered castors and 2 rigid castors, ESD compatible, max. load capacity 250 kg Auction-ID: A1-51646-45

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-24

Suitable for small load carriers 600x400 mm, stackable, 2 steered castors and 2 rigid castors, ESD compatible, max. load capacity 250 kg Auction-ID: A1-51646-32

4 steered castors, braked version, ESD suitable Auction-ID: A1-51646-30

559,8m PVC sill. PVC molding cherry 001. PVC molding walnut. PVC molding triangle. PVC molding 019 - indian marble. PVC molding 07 - red marble. PVC molding 08 - GREEN marble. PVC molding - marble. Auction-ID: A7-40559-27

Charger included ; Hours: 476 hours ; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not guarantee traffic and operational safety; The removal of this lot must be carried out by the buyer independently with suitable vehicles and means of transport; Auction-ID: A1-51728-30

Can be professionally disassembled by buyer Only lighting included that is mounted against the mezzanine floor Stairs included (dimensions stair steps: 25X80 cm, 14 steps) Dimensions: - Length approximately 17m - Width approximately 19.5m - Ceiling height approximately 2.48m - Floor height approximately 2.78m Auction-ID: A3-46115-15079

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-18