floor plate used for sale

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-45506-621

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-45506-204

70 liters; 65db ; digital control panel ; 500w ; 4866 Auction-ID: A1-45506-502

floor scrubber Brand: Kremer Type: KRFL50-A Function: Scrubbing and drying in 1 cycle Capacity: 2000 m² per hour Equipped with: adjustable brush pressure Brush diameter: 510 mm Brush speed: 175 revolutions per minute Holding tank: 50 litre holding tank Clean water tank: 50 liter clean water tank Number of motors: 2 motors Power: 2 x 500 watts Battery: 24 V / 100 Ah battery Including: battery charger available Manual: manual available Weight: 160 kg Condition: Unused in the original packaging Auction-ID: A3-43511-467

not in working condition, for spare parts or repair Auction-ID: A7-45452-64

Self-propelled floor scrubber Function: Scrubbing and drying in 1 cycle Capacity: 4500 m² per hour Equipped with: Adjustable brush pressure Brush diameter: 560 mm Floor squeegee: 800 mm Maximum speed: 5.5 km/h Brush speed: 170 revolutions per minute Holding tank: 70 litres Clean water tank: 70 litres Number of motors: 3 separate motors Battery: 24 V / 100 Ah Battery charger: Built-in battery charger Manual: Manual available Weight: 200 kg Condition: Unused in the original packaging Auction-ID: A3-43511-466

Digital scale with plate: 800x800mm maximum capacity: 300 Kg Minimum capacity: 2 Kg; division into 100gr. Serial: 05-286/H Estimated weight: 70 kg Approximate dimensions: 800x800x400 mm Auction-ID: A7-44996-105

CONTROLS   CNC controls NUM 1060 M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 2   X-axis travel: 3000 mm   Y-axis travel: 2010 mm   Z-axis travel: 2000 mm   rotating range A-axis from: 92.5 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1450 mm   table surface (front-back): 1600 mm FLOOR PLATE   total weight approx.: 12000 kg SPINDLE / HEAD   spindle revolutions (max): 3000 /min   tool fixture: ISO SK 50   drive power: 37 kW AXIS DRIVES   traverse velocity X (max): 25000 mm/min   traverse velocity Y (max): 25000 mm/min   traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENT ...

spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm Speed of boring spindles:1,25 - 1250 U/min. ram stroke:700 mm dimension of the ram:340 x 340 mm mm spindle taper ISO:50 rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m CNC control Siemens 840 Dsl completely modernized 2010 FIBRO CNC drilling work table 2500 x 2500 mm 50 to. workpiece weight Longitudinal travel 2500 mm Angular milling head 4 x 90° Universal angular milling head Panel area approx. 10000 x 5000 mm Chip conveyor and coolant device Aerostatic guides

spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped.

spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm ram stroke:700 dimension of the ram:340 x 340 mm spindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min. feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment

used chamber filter records 1000 x 1000 PP approx. 190 pieces in the camp

Krings Verbau various base plates with mounting plate dimensions, spindles, etc. in the package or individually for sale Mass and guide can be requested to e-mail Price VB

Straightening plate measuring plate measuring plate reinforced plate made of steel casting used. Length approx. 3560 mm Width approx. 985 mm Height approx. 910 mm (adjustable) with 5 feet Casting tear ingenuous plate with height-nivelable feet, support ball-bearing Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Base plate, turntable, machine vice -Base plate with angle scale -Dimensions: see photos -Dimensions total: Ø 395 x 50 mm -Weight: 18.6 kg

Granite measuring plate on base plate plate size approx. 1,000x800x170 mm, without the contents on the table

Baking Plate / Stone Plate / Oven Plate for Miwe Condo 1225x815x13mm NEWBack Plate / Stone Plate for Miwe Condo Oven Dimensions : 1225 mm x 815 mm x 13 mm Thickness 13mm Weight 25kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding agent from 10 pieces on request 

Baking plate / stone plate / oven plate for quail Piccolo 600x865x15mm NEWBack plate / stone plate for quail Piccolo oven dimensions: 600 mm x 865 mm x 15 mm thickness 15mm Weight 16kgwe have other size and assortment in stock Details see pictureAttention: No shipping only pickup. Shipping by forwarding company from 10 pieces on request

For an injection moulding machine, hole diameter 125 mm Auction-ID: A1-43992-210

see photos

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Chamber filter plates PP Polypropylene chamber filter plate -for almost all manufacturers: Rittershaus & Blecher, Passavant, Netzsch, Hoesch, von Roll, Diemme, Filox, Andritz, etc. Cake thicknesses and plate thicknesses are freely selectable depending on the application and filtration conditions. The chamber filter plate made of plastic is characterized by excellent chemical resistance and easy handling due to its low dead weight. - One component - The filter surface consists of a special conical bump structure. This pimpled structure supports the filter cloth and ensures excellent filtration performance for each individual chamber. - Filtratin inputs and filtrate sequences individually according to customer requirements - High plan parallelism, thus flawless sealing in the closed state. Standard formats: 250, 400, 470, 500, 630, 800, 915, 1000, 1067, 1200, 1300, ...

Membrane filter records Standard welds together the filtration cycle can be shortened by the application of membrane filter records considerably, while the unproductive phase of the pressure filtration is broken off and is substituted with the postpressing. full plastic membrane record with welded together membranes, thereby the easiest Handling and the highest chemical permanence perfect separation of the Nachpressmediums of the filtration product variable material choice membrane corners as ? circle to the membrane movement poor in tension for almost all formats and manufacturers. they need spare parts, accessories, service or servicing for your chamber filter press high-pressure membrane pump or drainage facility? request us. we help you with pleasure.

APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

used membrane filter records, membrane chamber filter records 1000 x 1000 pp approx. 190 pieces in the camp

Cat. No. 13-0217B-03 in very good condition measurement and weight: 2 plates in stainless steel 60 x 60 HxLxW: 134 x 220 x 97 cm 37 plates in pvc 60 x 60 weight: appr. 850 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

; ready for operation

Length: 350 mm Width: 150 mm Polarity ~ 9 mm Space requirement approx.: L: 440 x W: 210 x H: 135 mm Voltage: 24V Power: 2,04A

Chain plates (used) Serial No.: IMA -with rubber plate and mounting bracket -Dimensions: 80 x 60mm -more than 100 PCs available Price per piece: 4,50 euro + VAT

GEA Ahlborn plate heaters used

feeder: • pallet feeder • machine number (feeder) 34103/88 • counter EVZ 30 1st folding unit: • pre-slitter shafts • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • working width max. 94cm • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit • working width max. 66cm • 2 buckle plates • rear-mounted slitter shafts • noise prevention Still in operation: No Available: sofort

Cast T-slot plate 1500 x 950 mm

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm