floor plate used for sale

Equipped with: 2 floors each 3400mm high above each other. 2 Stairs of steel with grid steps, system profiles perforated, original calculations available, 72 meters of handrail (steel) present, column pressure on concrete floor max 23000 kg! Complete with mounting material! Auction-ID: A1-41997-8

Equipped with: Steel staircase with grid steps, system profiles perforated, original calculations available, 36 meters of handrail (steel) present, column pressure on concrete floor max 11180 kg! Complete with mounting material! Auction-ID: A1-41997-10

On offer are about 25 sets of floor mats in mint condition, for example Mercedes Benz Sprinter. estimated value of goods 1500€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-231

19 pieces of discarded scaffolding floors, wooden floors, L125, B32, Scaffolding system Hünnebeck Bosta70/100 SO000510 Auction-ID: A1-46973-311

19 pieces of discarded scaffolding floors, wooden floors, L200, B32 Scaffolding system Hünnebeck Bosta70/100 SO000502 Auction-ID: A1-46973-308

40 pieces of ceiling props, tubular steel props Europlus 260 DB, galvanized, extendable from 1.54m - 2.60m SO001059 Auction-ID: A1-46973-421

15 pieces of discarded scaffolding floors, wooden floors, L200, B32, Scaffolding system Hünnebeck Bosta 70/100 SO000513 The offer is WITHOUT any depicted transport or storage containers, barels, lattice boxes, etc. Auction-ID: A1-46973-314

11 pieces of wooden floors, L200 B32, sorted out Scaffolding system Plettac SL70 SO001030 Auction-ID: A1-46973-315

19 pieces of discarded scaffolding floors, wooden floors, L200, B32, Scaffolding system Hünnebeck Bosta70/100 SO000503 Auction-ID: A1-46973-309

Technical details Manufacturer: Comac Model: Simpla 50 BT Type: Walk-behind floor scrubber dryer Power: Battery-powered Configuration: - Large rotary scrubbing brush - Recovery/vacuum system - Squeegee assembly - Operator control panel - Battery compartment - Integrated wheels Application: - Warehouses - Supermarkets - Factories - Logistics centers - Food processing areas Condition: Used Auction-ID: A7-47053-8

200 Stork live bird boxes, (2x) 5 floors, dimensions floors: (10x) 1100 mm x 1140 mm, total dimensions: (200x) 2450 mm x 1200 mm x 1460 mm. The boxes are expected to be available from August. Collection by appointment.

100 Stork live bird boxes, (2x) 5 floors, dimensions floors: (10x) 1100 mm x 1140 mm, total dimensions: (100x) 2450 mm x 1200 mm x 1460 mm. The boxes are expected to be available from August. Collection by appointment.

floor scrubber Brand: Kremer Type: KRFL50-A Function: Scrubbing and drying in 1 cycle Capacity: 2000 m² per hour Equipped with: adjustable brush pressure Brush diameter: 510 mm Brush speed: 175 revolutions per minute Holding tank: 50 litre holding tank Clean water tank: 50 liter clean water tank Number of motors: 2 motors Power: 2 x 500 watts Battery: 24 V / 100 Ah battery Including: battery charger available Manual: manual available Weight: 160 kg Condition: Unused in the original packaging Auction-ID: A3-43538-615

This concerns an unused product, consisting of article number: 106403157, Hydroscrub P400 without Nozzles, Auction-ID: A1-45624-19

Floor scale Ohaus Defender 3000 with digital display Features: Digital display 230v connection Auction-ID: A1-41998-93

70 liters; 65db ; digital control panel ; 500w ; 4866 Auction-ID: A1-47029-502

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-47029-204

70 liters; 65db ; digital control panel ; 500w ; 4866 Auction-ID: A1-47029-503

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-47029-206

Concrete joint cutter Husqvarna: Disc diameter: 150mm; max. cutting depth:38mm; 3.6kw power;#20212500553 Dimensions: 800x600x1000mm Auction-ID: A7-47086-129

Vinyl - Floor Tiles anthracite grey slate Looselay or glue Designfloor LVT 14 packages each 3.72 sqm - total approx. 50sqm Auction-ID: A1-47205-2713

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-47029-205

Floor cutter with Honda engine 5.1kw; Blade holder 350mm; Device is defective Dimensions: 800mmx400mmx1200mm Auction-ID: A7-47086-64

Clipper Floor Cutter CS 451 #4503228901029 used Dimensions: 780mmx460mmx890mm Auction-ID: A7-47086-65

Cable duct grey Tripping protection Total length 16m Auction-ID: A1-47205-2208

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-47029-207

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-47029-621

Floor cutter with Honda engine 5.1kw; Blade holder 350mm; Device is defective Auction-ID: A7-47086-90

disk brush 350mm; squeegee width 450mm; clear water tank 20L; Recovery 25L; work capacity 1350m/h; Voltage 24V; Power 900W; brush disk motor 400W; suction motor 500W; battery monitor; Charger; manual; key-card; 7531 Auction-ID: A1-47029-202

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-47029-620

Film protection for work shoes when waxing/varnishing parquet flooring Auction-ID: A1-47205-2594

Self-adhesive floor tiles for indoor installation – durable vinyl, floor – 9 tiles per square metre – new and original packaging – on disposable pallet Auction-ID: A1-47205-310

disk brush 350mm; squeegee width 450mm; clear water tank 20L; Recovery 25L; work capacity 1350m/h; Voltage 24V; Power 900W; brush disk motor 400W; suction motor 500W; battery monitor; Charger; manual; key-card; 7531 Auction-ID: A1-47029-203

Auction-ID: A1-47205-2189

Approximately 27.62X6.17 = 170m2 Permissible load of 350Kg / M2 Height under iron: 300cm Wooden floor 30mm Already dismantled and palletized, ready for loading. New value 30,600e - We load the trucks free of charge for the buyer Auction-ID: A1-47062-38

Approx. 35x23.5 = 822m2 Load capacity of 350Kg/M2 Height under iron: 300cm Wooden floor 30mm 2 staircases and 120 meters of railings 2 lock barriers 2 air conditioning engines 10 insulated double doors 36 cells in total insulated by 10cm thick insulating panels 10 isolated rooms of different sizes between 25m2 and 150m2 Already dismantled and palletized, ready for loading. New value 246,000e - We load the trucks free of charge for the buyer Auction-ID: A1-47062-8

Approximately 20.19X6.33 = 127m2 Permissible load of 350Kg / M2 Height under iron: 300cm Wooden floor 30mm 1 staircase and railing Already dismantled and palletized, ready for loading. New value 22,860e - We load the trucks free of charge for the buyer Auction-ID: A1-47062-36

Mezzanines of 38m2: Approximately 14.75X2.6 = 38m2 Load capacity of 350Kg / M2 Height under iron: 300cm Wooden floor 30mm Already dismantled and palletized, ready for loading. New Value 6,840e - We load the trucks free of charge for the buyer Auction-ID: A1-47062-37

Mezzanine of 369m2 : Approximately 14.33X25.77 = 369m2 Permissible load of 350Kg / M2 Height under iron : 360cm Wooden floor 30mm Grade body and 1 staircase Already dismantled and palletized, ready for loading. New value 66 420e - We load the trucks free of charge for the buyer Auction-ID: A1-47062-35

spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm Speed of boring spindles:1,25 - 1250 U/min. ram stroke:700 mm dimension of the ram:340 x 340 mm mm spindle taper ISO:50 rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m CNC control Siemens 840 Dsl completely modernized 2010 FIBRO CNC drilling work table 2500 x 2500 mm 50 to. workpiece weight Longitudinal travel 2500 mm Angular milling head 4 x 90° Universal angular milling head Panel area approx. 10000 x 5000 mm Chip conveyor and coolant device Aerostatic guides

spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped.

spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm ram stroke:700 dimension of the ram:340 x 340 mm spindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min. feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment

used chamber filter records 1000 x 1000 PP approx. 190 pieces in the camp

Krings Verbau various base plates with mounting plate dimensions, spindles, etc. in the package or individually for sale Mass and guide can be requested to e-mail Price VB

Straightening plate measuring plate measuring plate reinforced plate made of steel casting used. Length approx. 3560 mm Width approx. 985 mm Height approx. 910 mm (adjustable) with 5 feet Casting tear ingenuous plate with height-nivelable feet, support ball-bearing Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.