floor plate used for sale

Sahinler 4R HSS 20-460 Hydraulic 4 rolls plate rolling machine

Sahinler 4R HS 30-260 4 rolls plate rolling machine Machine is in good condition

Onaran 3000 mm x 40 mm 4 Rolls Plate Rolling Machine Roll diameter : 400 mm Bending thickness : Up to 40 mm Bending length : 3000 mm Hydraulic side supports All maintenance has been done Machine is in very good condition

Bendmak APAS 360 4 rolls plate rolling machine Working length : 3100 mm Maximum thickness : 40 mm Machine is in excellent condition

Akyapak AHS 20/16 4 Rolls Plate Rolling Machine Max thickness : 20 mm Working length : 2100 mm

Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition

AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...

Plate Filter JOLLY 20 For Juices, Wines, Beers and Oils - 2021 This plate filter was made by Italian MORI-TEM company in year 2021 and it has been only tested and thus in new like condition. Main structure is made of AISI 304 stainless steel, and the plates are made of food quality plastic material. It has been designed to clarify and sterilise red, white and sparkling wines, olive oil, vinegars, cosmetics, natural essences, herbalist products, sweet and dry liqueurs, etc. Equipment contains a food grade product circulation pump Technical characteristics Manufacturer: MORI-TEM S.r.l. Model: JOLLY 20 Manufacturing year: 2021 Capacity for oil: 100 litres/h Capacity for wine: 600 litres/h Number of plates: 21 Plate size: 20 x 20 cm Filtration area: 0.8 m2 Main dimensions: 72x43x55 cm (L x W x H) Machine weight: 36 kg Certification: CE

length: 5200 mm width: 2000 mm Thickness: 400 mm number of T-slots: 6 T-slot - width: 32 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Retaining plate MWM 12300186 - Suitable for several motors - Please note! Price per piece! - 12300186 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ne ...

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12500x5500 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Durma HRB 4-3025 CNC Plate Rolling Machine Machine is in good working condition

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m Universal milling head Heidenhain D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9000 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sahinler 4R HS 20-150 4 rolls plate rolling machine Working length : 2050 mm Machine is in good working condition

Tangential grinding Kent brand Model KSG63-FD1 Table 300x600mm Availability: starting from April 2024 Year 2000

Used Faccin 2621 b3 Plate rolling machine Used machine visible in Italy, sold as it is

M. No.: 1683/22

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

MBO K55-4KTL + window buckle plate In great working condition. - 2 Knives - 4 buckle plates + window buckle plate - gluing system (not complete) - Vaculift, Vacubelt, Vacutable

Max. circling length: 3100 mm Max. metal sheet thickness: without pre-bend - 6 mm Upper cylinder diameter: 200 mm Side cylinder diameter:: 190 mm engine tilt:: 4 kW Engine hours worked: : about 60-80

CNC bending line for bending sheets up to a thickness of 8 mm and a width of 2500 mm. The machine is being sold due to its lack of use, it was practically unused. the machine is connected, functional and can be demonstrated in action.

Max. length of plate 2050 mm Max. plate thickness 4 mm Number of rolls 3 pcs Upper roll diameter 136 mm Lower roll diameter 136 mm Max. pre bending capacity 4 mm

Working length 2050 mm Maximum sheet thickness 4 mm Roller diameter 140 mm

Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min

Capacity: 4250 x 8mm Hydraulic drive on the main role 3 roll driven Digital reading on the clamp and bending roller

length: 800 mm width: 500 mm table height: 20 mm Total weight, approx.: 60 kg dimensions of the machine ca.: 0,80 x 0,50 x 0,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 600 mm width: 500 mm table height: 20 mm Total weight, approx.: 60 kg dimensions of the machine ca.: 0,60 x 0,50 x 0,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 300 mm width: 150 mm height: 90 mm voltage: 24 V weight of the machine ca.: t dimensions of the machine ca.: m Power connection 24V / 2,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2360 mm y-travel: 1570 mm z-travel: 780 mm w-axis: 410 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12000x6000 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 12000 mm width: 9600 mm number: 1 plate dimensions -w x h: 6000x2400 mm Thickness: 450 mm width of T-slots: 42/72 mm T-slot - distance: 300 mm number of T-slots: 8 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 12000 mm width: 6000 mm number: 1 plate dimensions -w x h: 6000x2000 mm Thickness: 350 mm T-slot - width: 36/60 mm number of T-slots: 8 T-slot - distance: 285 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 5000 mm width: 3600 mm number: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2400 mm width: 3100 mm table height: 660 mm Thickness: 300 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,4x3,1x0,66 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition. Max. length of circled sheet: 2000mm Max. thickness of circled sheet: 4mm It is fully functional and without defects. It is quiet and fairly accurate. By prior arrangement, the possibility of a tour in progress.

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

Complete plate production plant OCEM / Cassani consisting of: - Dosing and mixing system Attachment mixer (Teka) like new (approx. 3 years old) - OCEM OPA108SB plate press with moulding device 400x400 4-fold - Attachment doser STP825 - Double washout system for exposed concrete (4-fold washing) - Flat shelf with transfer table - approx. 2,600 steel pallets - Cassani calibration machine - Grinding machine Cassani - Coating system with paternoster - Packaging line (built in 2019) Complete tiles/slab production line OCEM / Cassani consisting of: - Dosing and mixing plant - First layer mixer (Teka) as new (approx. 3 years old) - Double layer hermetic tile/slab press OCEM OPA108SB with mould equipment 400x400 4-fold - First layer dosing unit OCEM STP825 - Double washing system for washed concrete/exposed aggregates - Flat depositing system ...

length: 12000 mm width: 4000 mm number: 6 Thickness: 300 mm T-slot - width: 36/60 mm T-slot - distance: 235 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel consists of 8 panels Size per panel 3500x1750x350Number of T-slots per panel 7 pieces Total 49 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer

Disma Model 13-TLS motorized cylinder with 1050mm tempered roller. Rollers diameter 90mm. Voltage 3PH/380V

continuous grilling line suitable for frying, cooking or browning electric heating 400 kW 510A, 3 x 400V, 50Hz with bottom and top band : bottom and top contact frying Overall dimensions (L x W x H) : ± 7,700 x 2,300 x 2,400 mm Cooking time: from 10 sec. to 5 min. Useful length 6,000 mm Track width 1,060 mm max 260 degrees product height 250 mm Air: 6 bar - 100 l/min Water: 65 degrees - 2 bar - 30 l /min variable frying height infinitely variable speed pneumatically controlled tape Siemens PLC control with belt washing system

HEIDELBERG Nela Plate Bending suitable for HD SM 52 / 74 /102 and XL machines different years of construction available

HEIDELBERG Nela plate punch Suitable for HD SM 52 / 74 /102 and XL machines Hole spacing: 425 mm and 780 mm Various year of manufacture models available

he machine is in good technical condition, can be tested under power. Four-cylinder turning machine. Producer: MG s.r.l., Italy Four cylinders with a length of 2050 mm Diameter of the upper cylinder: 140 mm Diameter of the lower cylinder: 130 mm Diameter of side rollers: 105 mm Sheet rolling thickness: 4 mm. Sheet pre-bending thickness: 2 mm Power: 3 HP = 2,237 Kw Weight: 1.9 t

Kilia ribbon mixer-grinder, plate diameter: 130 mm, total dimensions: 1250 mm x 1050 mm x 1500 mm. Including 2 crates with extra plates.