135,551 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
measuring length: bis 5700 mm Tube length: 6000 mm numbers of toolholders: 7 : Rohr Edelstahl dimensions: 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 600 mm table width: 240 mm x-travel: 370 mm y-travel: 130 mm table height: 165 mm weight: 60 kg dimensions: 0,8 x 0,45 x 0,2 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm
impact length: 6000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 195 kg length in width: 620 mm length in total: 6400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SEPARATOR BAADER, TYPE: 696 Technical description: Machine number: 12 6533 0696 Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Power supply: 380 V, 3 Ph, 50 Hz, 3.7 A, 1.5 kW Dimensions: 1050 x 1000 x 1340 mm
Schütte 32 multi-spindle lathe, completely rebuilt by GWM-Tech, Fanuc AC motors, FANUC motors for threading, PLC, pick-up spindle chuck, bar loader Cucchi Pietro
grinding length: 800 mm grinding width: 600 mm grinding height: 500 mm weight of the machine ca.: 4.9 t dimensions of the machine ca.: 3.20 x 2.90 x 2.55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
Alfa Laval CHPX 404 TGP-61GY year 2020 Separator used Tools 9600 r/min Motor 3kW
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Contactor Power Contactor Original Packaging -Type: 3RT1055-6AP36 -Auxiliary switch: Type 3RH1921-1DA11 -Cardboard dimensions: 200/130/H180 mm -Weight: 3.3 kg
A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.
table length: 750 mm table width: 300 mm x-travel: 500 mm weight of the machine ca.: 0.160 t UNUSED CONDITION The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Carpentry machine Hundegger k2 625 5 axis year 2003
Control: Manufacture: SIEMENS 840D x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm table-size: 900 x 560 mm spindle turning speed range: 12000 U/min tool magazin:: 30 weight of the machine ca.: 5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical machining center DOOSAN DNM 650, control system FANUC
x-travel: 6000 mm y-travel: 1000 mm z-travel: 1200 mm table-size: 6400x1000 mm tool change unit: 80x spindle taper: HSK A100 spindle turning speed range: 45-9000 U/min total power requirement: kW weight of the machine ca.: 48 t dimensions of the machine ca.: 12x4.3x4.5 m SIEMENS 840D 4th axis B-Axis +/-90° Spindle coolant through spindle Tool measuring device www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm spindle turning speed - stepless: 20-14000 U/min weight of the machine ca.: 4 t dimensions of the machine ca.: 5 x 3.5 x 2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Continuous ploughshare mixer, used Type : KM 600 DW Brand: Lödige Material : Areas in contact with the product in stainless steel Volume : 600 ltr. --> 2 x Knife Head
600 m pallet rack STOW, as good as new Features • Colour: Galvanised frame / yellow beam •Ultimate load: o Bay load: 12,000 kg o Shelf load: 2,400 kg per level/evenly distributed load + 216 frames, height approx. 5500 mm, depth 1100 mm + 1290 pcs. Beam 2700 mm length, 2400 kg load/with evenly distributed load + 2580 Hook-in Safety Devices + 864 concrete anchors M12 x 110 mm for fastening Price / 48.100,- € net excl. VAT Matching insert wire mesh available on request • Other heights and quantities on request • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as we ...
roll diameter: 600 mm roll length: 1800 mm rolls drilled: Flaschenhals Nip adjustment: hydraulisch 0 total power requirement: 132 kW Condition: used, completely overhauled, with warranty Specification: Rolling mill 600 x 1800 mm - used monobloc model - motor under the rolls - roller diameter: 600 mm - roll length: 1800 mm - Roller core with central chamber for water cooling - Fixed friction between the rolls - hydr. gap adjustment: new - hydraulic unit: new - Tiltable steel guide plates - Rollers on bronze bearing bushes with oil circulation lubrication via pump - Rollers with new ball bearing slewing rings, make Maier, for connection to the water circuit to the water circuit - AC main motor: 132 kW - 400 V - 50 Hz - two Safety brake for EMERGENCY STOP - Roller tank made of stainless steel to hold the mixture - Bi-directional safety bars - V ...
An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible.
Linear weigher with spiral conveyor for sliced or pulled meat such as gyros, kebabs, pulled pork, or also minced meat, fresh/humid fruits, fresh vegetables, etc. Weighing range: 50-200g. 6 weighing heads with load cells allow fast and precision weighing. - Specifications: capacity weighing hopper: 5 L | number of weighing heads: 6 | weighing range: 50-200g | accuracy: +/- 1-10g | max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 1-phase | touch screen control | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times fro ...
Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60XL as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum | MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface | mark sensor registration control | quick change former assembly, pneumatic sealing unit | servo motor film pulling | bag si ...
Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60L as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum | MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface | mark sensor registration control | quick change former assembly, pneumatic sealing unit | servo motor film pulling | bag siz ...
Fully automatic liquid filling machine with 6 filling heads for filling volumes of different alternative ranges e.g. 50-500ml ? customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder ? uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: number of filling heads: 6 | max. speed of the machine in neutral: 35 cycles/minute | accuracy: depending on chosen filling range and ...
Vertical packaging machine with piston pump for dosing liquids. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50ml | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L900xW700xH1850mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packa ...
Vertical packaging machine with auger dosing unit for powders. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH2050mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packagi ...
Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH1900mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pa ...
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging ...
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...
Automatic Sleeve Labelling Machine with a capacity of up to 100 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | label ?: 28-50 or 50-95 or 95-125mm | label length: 35-300mm | label thickness: 0.035-0.08mm | power: 2kW, machine dimensions: L6000xW1050xH2100mm | weight: 1200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available im ...
Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 200-600kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 15L/min | power supply: 220V | power consumption: 2.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
X-ray inspection system designed for large trays, boxes, large bags. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 600 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 750 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 60 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L1800xW1300xH1900 mm | weight: 580 kg. Please note that our new prices are often below the usual used prices. Pl ...
Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 130 x 50 mm Truss Type: PNB0443|1.5 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,417 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Brand Name: GOPEL Model: OPTICON THT 600 LINE Year: 2015 Serial Number: TH-603 Notes: - The machine is in excellent condition and in working order. - No CE manuals and declaration of conformity have been provided. - The goods being sold are declared out of service and with the obligation to restore safety in the devices relating to Legislative Decree 81/08 on machine safety. - PROPERTY INTENDED FOR VAT HOLDERS.
For sale is a good used Keyence digital measurement projector of the type IM-6025. The measuring device is sold including the IM-7500 control unit. Prior sale and errors excepted.
Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 120 x 50 mm Truss Type: PNB0442 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,058 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: Some of the trusses have 5-6 drill holes on the sides. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery loc ...
Key data: 1942 , 690
Available One complete Jenbacher 612 plant from 2018, with 19,000 operating hours. All maintenance has been performed by the official service. The engine has a power output of 1972 kW and an electrical output voltage of 690 V. The generator brand is STAMFORD. Scope of supply includes: Genset, cooling system, transformer, DIANE XT4 control system, fans, generator circuit breaker, gas train, low and high temperature pumps and heat exchangers, silencer, andoil system. Boroscope inspection, maintenance records, and inspection reports are also available.
used
Cutting lenght 6000 mm Cutting thickness 13 mm
Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600 RA2181 Technical data: Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width ...
Knapp roller conveyor accumulation roller conveyor 2690-710-650 RA1952 Brand: Knapp Running direction: both directions Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm length: 2690 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: belt, not included Stowage spaces without drive: 5 Frame height: 90 mm Conveyor speed: motor station dependent, please contact us for details Scope of delivery: without supports, without side guide, without drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one side and on both sides Motor station Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Nominal / outside width in mm: 710 nominal voltage: 24V Roll division in mm: 90 Stowage spaces: 5 Stauplätze ...
Bridge punch of the company Schön, model 64035 / 92 The machine is fully functional.
complete MWM gas installations TBG620V16K 1350 KWe stamford alternator 1680 KVA
maximum number of results exceeded
please refine your search
