flexo machine used for sale

We offer here a used fully automatic wrapping machine from BENHIL, type MULTIPACK 5000. Installed format 100x75x35mm, bottom folding. Suitable for filling volume 200-300g. Output: up to 135 cycles/min. depending on product and filling quantity. The machine was regularly checked and maintained according to the maintenance plan by technicians from BENHIL. The scope of delivery includes a discharge belt approx. 6m, pneumatic compensation cylinder and CIP device. Documentation and spare parts as far as available on site. The BH 5000 is still in production until approx. beginning of 2027. Subject to change and prior sale

Metal plaster KD for 98cm sheets - Sheet metal cleaning machine brush machine - suitable for 98cm sheets with 2 edges Margins on the short side - mobile on wheels - 380 volts

Sell a TBT quill block, Condition new. Pinol block has never been installed. Original price is 30.800,00 Euro net. .VB

This 6-axis SMEC SL2000SY was manufactured in 2022. It features a maximum turning diameter of 395 mm and a maximum machining length of 450 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and a tool turret capacity of 12 stations. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000SY horizontal turning machine we have for sale. Contact us for further details.

This 6-axis TRUMPF TruLaser Robot 5020 was manufactured in 2011. It features a TRUMPF TruDisk 4002 laser source and includes essential components such as an articulated robot arm, rotary/tilt table, and a chiller unit. If you are looking to get high-quality laser welding capabilities, consider the TRUMPF TruLaser Robot 5020 machine we have for sale. Contact us for further details.

This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details.

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

Sell a Thissen telescope. new Never been installed. For a 30NC-244.384, Ident No. 20761, Art.Nr.: A2976001, .VB

Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2019. This YEAR-CHANCE YC-C 220S features a clamping force of 2,200 kN and a maximum injection volume of 546 cm³. It is equipped with a screw diameter of 55 mm and a maximum injection pressure of 1,797 Bar. If you are looking to get high-quality injection moulding capabilities, consider the YEAR-CHANCE YC-C 220S machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2020. This ZHAFIR ZERES ZE900/210B features a clamping force of 900 kN and a maximum injection pressure of 2,000 Bar. It has a screw diameter of 32 mm and accommodates molds with a maximum height of 410 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES ZE900/210B machine we have for sale. Contact us for further details.

Clamping force: 100kN, tie-bar spacing: 470mm, mains connection: 400V/50Hz/64A, control: CDIAS, weight: 5.7t, an on-site inspection is possible.

Norpak Rover150 label applicator label applicator, variable speed head, max label width 110mm, with food pedal, 1Ph

PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2

510 J type - equipped with Iemca MiniBoss 325/37 new in 1996 - tool eye - accessories - Fanuc 18-TB Control

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

A package of five Dürkopp/Adler industrial sewing machines is offered. 1) Dürkopp industrial sewing machine. 2) Adler 220-76 long-arm industrial sewing machine. 3) Dürkopp industrial sewing machine. 4) Dürkopp Adler 767-FA-373-RAP industrial sewing machine, type: 0767 990015, year of manufacture: 1999. 5) Dürkopp Adler K767 industrial sewing machine. Inspection possible by prior arrangement.

Number of spindles: 5, ring diameter: 200mm, bobbin length: 550mm, compressed air connection: 6-8bar, compressed air consumption: 0.5l/s, voltage: 380V, frequency: 50Hz, connected load: 6kW, CE marking present, an on-site inspection is possible.

Ring diameter: 200mm, bobbin length: 550mm, connected load: 13kW, mains connection: 380V, three-phase connection: N + PE, an on-site inspection is possible.

Trumpf TRUBEND 5085 - WORKING INSIDE PRODUCTION WORKING HORS: PRESENT ON PHOTO OF SCREEN Year 2011 Compression force: 85 tonnes Table length: 2,200 mm Free travel speed: 220 mm/s Accessories: Increased lift height from 230 mm to 615 mm. 5-axis bending. Hydraulic tool clamping at the bottom. Hydraulic tool clamping at top. Automatic bombing. Bendguard guard ACB angle measurement FOR CLIENT WE ORGANIZE AS WELL DISMANTLING AND TRANSPORT

CNC Turning Center manufactured in 2014. This DMG MORI NLX 2500/700 features a maximum turning diameter of 260 mm and a turning length of 795 mm. With a robust machine weight of 4800 kg and a rated power of 25 kVA, it is designed for precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX 2500/700 machine we have for sale. Contact us for further details.

Plasma cutting machine manufactured in 2019. This KOIKE PNC-12 Extreme features an effective cutting area of 1,500 x 3,000 mm and a maximum programmed cutting speed of 3,000 mm/min. It includes a robust downdraft cutting table and a Cebora plasma power source with a maximum cutting current of 110 A. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE PNC-12 Extreme machine we have for sale. Contact us for further details.

Kneading machine Boku Type: AK 240 Year of construction: 1996 / 2004 Dough quantity: 240 kg additional 2 boilers Manual control 2 speed automatic Mechanical boiler locking Weight: 0.7 t per kneader Condition: from service, electrics and mechanics contra.

Setter machine autonomous for pastry line Belt width 800 mm Settling length adjustable without substructure for sheet metal Condition very good, new settling belt

CMM machine manufactured in 2024. This Hexagon MARVEL 3D Scanner features multiple scanning modes, including Standard, Fine, and Edge Detection, with a measurement rate of up to 2,100,000 points per second. It offers a scanning area of up to 600 x 550 mm and a resolution of up to 0.02 mm. If you are looking to get high-quality scanning capabilities, consider the Hexagon MARVEL CMM machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2002. This Arburg 420 C 1000-150/60 features a clamping force of 1,000 kN and a maximum mold height of 750 mm. It includes a screw diameter of 25/22 mm and a maximum injection volume of 54/30 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 420 C 1000-150/60 machine we have for sale. Contact us for further details.

Spiral mixers with 2 speeds and 2 digital timers that automatically control the switching of speeds from mixing to kneading. Controls located at the front. Closed protective hood. Mobile. Dough holder for 2 - 25 kg dough, bowl capacity 45 liters W x D x H: 570 x 890 x 1190 mm Power: 400 V / 50 Hz / 1.9 kW Condition: as new, very little used.

Hydraulic injection moulding machine manufactured in 2013. This Engel Victory 500/160 tech features a clamping force of 1600 kN and an injection unit of 500. It includes a patented tiebarless clamping system and a highly abrasion-resistant cylinder. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 500/160 tech machine we have for sale. Contact us for further details.

Wire stitching machine Hohner Economy 25/40; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with folded clamp, 40mm with unfolded clamp; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.

Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Key data: 600 , 172 , 40

Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German

Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 900/280 A ECO features a clamping force of 900 kN and a maximum injection pressure of 2,340 Bar. It includes a screw diameter of 36 mm and a maximum injection volume of 121 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 900/280 A ECO machine we have for sale. Contact us for further details.

Key data: 1000 , 166 , 40

Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface

Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details.

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

Hydraulic injection moulding machine manufactured in 2016. This Krauss Maffei 110-180-180 CX V features a clamping force of 1,100 kN and a minimum mold height of 377 mm. It includes a screw diameter of 22 mm and a centering ring of 125 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 110-180-180 CX V machine we have for sale. Contact us for further details.

Magazzino DANOBAT 3 mt. 15 postazioni Circa 15 aanni

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

milling machine, year 2008. Used machine. More info & price on IndustrialBuyer.

Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.

Package strapping machine with frame size 1600 x 400 mm, width 12 mm. Very little used, because bad buy. Location Netherlands, Sold on order.

milling machine, year 1996, CNC tnc 407. Used machine. More info & price on IndustrialBuyer.

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

milling machine, year 2001, CNC TNC 426. Used machine. More info & price on IndustrialBuyer.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Uhlmann C 130 horizontal cartoning machine / cup chain - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 60 FS/min / depending on product Format: L= 70 x 150 mm x W= 30 x 80 mm H= 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 2 x servo motor for product insertion mechanically overhauled GUK Brochure Folder 4-fold folding Luminizer control, presence control for package inserts in Folding shafts Turntable 700 mm diameter Flexlink band speed adjustable Automatic bottle separation feeding

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packaging can be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: TX 12/121; Year of production 1991; Working with soft foil; Bottom foil: +/- 415 mm (approx); Upper foil: +/- 405 mm (approx); Molding length: 395mm; Forming width: 368mm; Molding depth: 90mm; Formats: 1.2; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg - the machine is dismantled; - technical condition - good; - yes, there is original documentation, CE certificate, CE nameplate and a general list of inputs and outputs.