134,909 used machines on RESALE, but how to find them? Machine Search
Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: wrt, deburring machine with base -Drive: 3.0 kW / 2800 rpm -Brush: Ø 250 mm -Shaft: Ø 80 x 110 mm -Dimensions: 660/430/H1200 mm -Weight: 101 kg
Drilling machine Brand: Flott Type: 6STW Technical data: Drill chuck holder: B12 Drill chuck stroke: 40mm Distance from column to drilling area: 180mm Thickness of the column: 50mm Worktop: 180x260mm Motor: 0.9 kW Speed: 1250-8000 rpm Weight: approx. 20kg Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.
x-travel: 800 mm y-travel: 500 mm z-travel: 460 mm table surface area: 1000 x 500 mm spindle taper: SK 40 control: HEIDENHAIN TNC 150 spindle turning speed range: 31,5 - 3150 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid traverse longitudinal and cross: 6 m/min rapid traverse vertical: 4 m/min quill stroke: 110 mm distance spindle nose and table: max. 559 mm table load capacity: max. 500 kg total power requirement: 14 kW weight of the machine ca.: 3,1 t dimensions of machine L x W x H: 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 406 mm, 584 mm
Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws
x-travel: 800 mm y-travel: 450 mm z-travel: 400 mm table surface area: 1385 x 305 mm spindle taper: SK 40 quill stroke: 200 mm spindle turning speed range: 50 - 3500 U/min control: HEIDENHAIN control: TNC 155 total power requirement: 5,8 kW weight of the machine ca.: 2,5 t dimensions: 2,25 x 2,0 x 2,4 m Accessories: electron. handwheeel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units, drilling and sinking 5 units, drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
RAFAMET KCH 360/450 vertical turret lathe was built in 1987 in Poland by Fabryka Obrabiarek RAFAMET. The machine is used for precise machining of large and heavy workpieces whose size does not allow effective machining with standard machines. RAFAMET KCH 360/450 is distinguished by its stable design, equipped with two vertical supports and one side support. Machining is performed on a work table with a diameter of 3600 mm by means of a reliable vertical spindle. The work table offers 20-position speed adjustment in the range of 0.6 to 50 rpm, enabling precise adjustment of the parameters to the production requirements. The position of the head in all linear axes is continuously monitored by state-of-the-art SONY digital readout, which ensures high precision measurement. All this makes the offered KCH 360/450 vertical turret lathe an excellent choice for, among others, the energy, ship ...
stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units, drilling and sinking 3 units, drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...
Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg
Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995
saw blade diameter: 70 - 230 mm sawblade width: 12 mm hole of sawblade: 10 - 50 mm grinding wheel diameter: 120 mm grinding wheel width: 6 mm grinding wheel hole diameter: 32 mm no. of teeth: 30 - 400 total power requirement: 0,33 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,70 x 1,70 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mm throat: 320 mm bore stroke: 135 mm thread dia.: M 20 mm spindle turning speed range: 72 - 2600 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MT 3 table surface area: 370 x 360 mm Distance spindle/table max.: 850 mm distance spindle/base plate: 1400 mm voltage: 400 V / 50 Hz total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 0,7 x 2,3 m • with cooling device • threading attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Super clean 1993 Bridgeport EZ trak SX 2 axis mill. Machine is in very nice condition. It has none of the usual battle scars from use and appears to have been used very little. The control boots up as it should and both axis motors work smoothly. SPECIFICATIONS: Capacity 9" x 48" Table Size 9" x 48" Longitudinal Travel 30" Cross Travel 12" Vertical Knee Travel 16" Spindle Speeds (Variable) 60-4200 RPM Spindle Taper R-8 Spindle Quill Travel 5" Positioning Speed (X-Y Axis) 100 IPM Feed Rate (X-Y Axis, Variable) 0.1-100 IPM Spindle Quill Feeds (3) 0.0015" - 0.003" - 0.006" Ram Travel 12" Distance, Table To Spindle Nose 2 1/2" - 18 1/4" Throat Distance 6 3/4" - 18 3/4"
grinding wheel diameter: 350 mm no. of working stations: 2 grinding wheel width: max. 125 mm work piece support: jeweils 470 x 260 mm dimensions l/w/h: 1,32 x 0,78 x 1,3 m - work piece support can be swivelled - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2020 mm plate thickness: 1,5 mm distance between columns: 2050 mm Daylight opening: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 2,7 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Cutting, Drilling, Nesting, and Milling Capabilities H10 Spidle Head 3-Axis Capabilities Dual Becker Industrial Vacuums Automatic Tool Length Measuring System Low Maintenance Bridge Design w/ Gantry Drive 28 Spot Linear Tool Holder Includes (20) Different Tool Heads 10" and 6" Suction Tubes Dual 24" Control Monitors Label Maker and Printer Includes Auto Voltage Transformer Software License Not Included Specifications Model Year: 2016 Processing Table Size: 146" x 61" Finish Table Size: 152" x 61" Max Motor Power: 10 kW Motor Speed: 24,000 rpm Tool Holder Places: 28 Number of Tool Heads: 20
bore diameter: 550 mm Spindle diameter: 100 mm bore depth: 320 mm turning speeds: 10 70 U/min feed stepless: 0 - 12 mm/min voltage: 380 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1,0 x 2,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 150 mm y-travel: 300 mm z-travel: 350 mm table surface area: 350 x 200 mm spindle turning speed range: 475 - 20000 U/min total power requirement: 0,4 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 1 x 1,4 m • without templates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 105 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 325 mm adjustment of cross-rail: 785 mm distance between columns: 1600 mm distance spindle - column min./max.: 215 / 1100 mm spindle feeds - stepless: 1 - 6000 mm/min spindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/min table surface area: 900 x 1500 mm workpiece weight: 2000 kg spindle drive: 5 kW total power requirement: KVA weight of the machine ca.: 6 t dimensions of the machine ca.: 3,3 x 3,0 x 2,8 m dimensions of the machine ca.: 3,3 x 3,0 x 2,9 m • with RENISHAW -detector OMP 40, • mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transpak TP 6000 Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to about 30 straps per minute. -Frame inner dimensions approx. 850 x 600 mm. -Firm strapping by 12 mm tape. -Automatic belt forwarding and belt return. -Strap tension adjustable. -Triggering: strapping via hand button or foot switch or alternatively automatic mode selectable (sensor in the table top). -Uncomplicated and ergonomic bobbin changing and threading system. -Designed with ergonomic roller conveyors on the table surface. -Working height approx. 820 mm. machine can be moved via castors. The machine can be demonstrated under power.
Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph
Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to about 30 straps per minute. -Frame inner dimensions approx. 850 x 600 mm. -Firm strapping by 12 mm tape. -Automatic belt forwarding and belt return. -Strap tension adjustable. -Triggering: strapping via hand button or foot switch or alternatively automatic mode selectable (sensor in the table top). -Uncomplicated and ergonomic bobbin changing and threading system. -Designed with ergonomic roller conveyors on the table surface. -Working height approx. 820 mm. machine can be moved via castors. The machine can be demonstrated under power.
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1 Control: 840 C Siemens total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,2 x 2,3 x 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Professional strapping machine with internal frame dimensions of approx. width 850 x height 600 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Equipped with ergonomic casters on the table surface. -Strapping release alternatively possible by hand switch or table photocell (automatic operation). -Up to approx. 20 straps per minute. -Band width 12 mm. -Strap tension infinitely adjustable. -Fully automatic tape threading and tape penetration monitoring. -Closure type: Welding in the heating wedge method. -Electronic temperature control. -The machine can be moved via castors. The machine can be demonstrated under power.
MIG/MAG welding machine, MIG/MAG welding machine -Max. welding current: 320 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg
Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm ...
Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...
used
Working areaTurning diameter500 mmDistance between spindles1435 mmMax. Turning Length1100 mmGeneralTurning/milling center with turning length 1100 mm - mounting HSK-A 63 DIN 69893 - B-axis ±120 - Y-axis ±100 mm - 60-fold chain magazine - Absolute, direct path measuring systems in X-, Y- and Z-axis - Hydraulically movable tailstock with foot pedal - Double switch filter - Electric handwheel - DMG MORI IoT connector - Clamping pressure adjustment on the control - 5-axis simultaneous machining; Control: CELOS X with Siemens SINUMERIK ONE Main drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-15000 rpmDrive power (40% DC)22,5 kWDrive power (100% DC)19 kWTorque (100% DC)85 NmTorque (40% DC)120 NmFloor space/WeightDimensions (L x W x H)5,77 x 2,33 ...
AGIE CHARMILLES FO 350SP die-sinking EDM was built in 2013 in China by Beijing Agie Charmilles Co., Ltd. The machine is in very good condition, fully operational and regularly serviced throughout its service life. The AGIE CHARMILLES FO 350SP is used in the production of precision tools, moulds, dies or punches. The machine uses an electrical erosion method that enables complex shapes to be made in even the hardest materials. This method also minimises or completely eliminates the need to undertake additional finishing processes, such as polishing. The machining process is performed in a dielectric-filled work tank. The use of dielectric increases the surface quality and dimensional accuracy of the workpieces, and its level and working pressure are continuously monitored by an advanced measurement system. The work table, in turn, has T-slots for fast and easy clamping of workpieces. A ...
width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 mm work table:: 170x125 / 265x150 mm total power requirement: 0,5 kW weight of the machine ca.: 26 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AVIA FNE 50N CNC milling machine was built in 1998 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is fully operational and has been regularly serviced throughout its service life. The AVIA FNE 50N was designed for precision machining of workpieces made of, e.g. steel, cast iron or aluminium. The machining process is performed inside a large work space by means of a reliable spindle with stepless rotational speed adjustment. When removed from the head, the spindle can operate both vertically and horizontally, with the same parameters. The work table with a length of approximately 1250 mm and a width of 500 mm, on the other hand, has T-slots for easy mounting of workpieces and tooling. All this is complemented by an intelligent HEIDENHAIN controller, offering convenient operation and access to many advanced functions. The AVIA FNE toolroom milling machine weighs 3000 ...
plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gate Sharper Manufacturer Vollmer for Inclined and straight ground
complete in standard version with: - Fully automatic electronic control with Program selector switch RINSE-GLUE-GLUE/DRIVE - Dowel feeding via electronic vibratory conveyor with potentiometer for infinitely variable adjustment of the dowel conveying capacity - Automatic dowel diameter and dowel length control with Auto-DL-Selekt system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 2,250 mPas - Stepless electronic glue quantity adjustment with potentiometer by means of time preselection by electronic control - Glue/water selector switch for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control lamp for glue r ...
Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape
The machine is in good technical condition, testing is possible by prior arrangement. Machine length: 9300 mm (including pallet changer) Machine width: 4700 mm Machine height: 2200 mm Machine weight: 5500 kg Control unit SINUMERIK 840D SL Laser TruDisk 10,000 W Axis travel X-axis: 3000 mm Y-axis: 1500 mm Z-axis: 115 mm Maximum material thicknesses Hot-rolled steel: 35 mm (O2) Mild steel: 25 mm (O2) Mild steel: 12 mm (N2) Mild steel: 8 mm (Air) Stainless steel: 40 mm (N2) Stainless steel: 25 mm (Air) Aluminum: 30 mm (N2) Copper: 12 mm (O2) Brass: 12 mm (N2) Closed protective cabin TruDisk laser motion unit Cutting unit Extraction unit Pallet changer Hydraulic unit Cooling unit Longitudinal conveyor Cross conveyor Media Power supply: 400 V / 50 Hz Power consumption: 63 kVA Fuse: 3 x 100 A Control voltage: 24 V Compressed air: 7–10 bar (7–15 bar for cutting) Nitrogen: 30 bar Oxygen: 20 ...
Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit ...
Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
