flexo and rotogravure used for sale

A second-hand line for milling and pressing fruit and vegetable pulp. The line consists of: - BELT PRESS TYPE B FRU 800 HK WITH CONTROL PROBE IN FEED HOPPER FLOTTWEG 2008 - FEED HOPPER MEGA 2012 - ROTARY SIEVE WITH EXTERNAL INFLUX DIA. DRUM 355MM LENGTH DRUM LENGTH 1600 MMDRUM 1600 MM MEGA (FLOTTWEG) 2012/14 - METERING RUNG ELEVATOR - BRUSH POLISHER MEGA 2008 - INSPECTION ROLLER CONVEYOR MEGA 2008 - FLOTTWEG SCREW CONVEYOR 2017 - PULP CONTAINER 400L - CENTRIFUGAL PUMP FOR PULP - 500L FLUSHING WATER TANK - CENTRIFUGAL PRESSURE PUMP - PIPES, FITTINGS, ELECTRICAL CONTROL CABINET FLOTTWEG 2008 - JUICE COOLING SYSTEM STM 2018 - TUBE BEAKER SPOMASZ 2018

Nominal power in kilowatts: 7,7 MW Maximum power: 8,47 MW Nominal turning speed: 1150 1/min Maximum turning speed: 2200 1/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm 8 MW test bench for gears, closed loop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Siemens Built year: 2012 Alternators and 3-phase induction motors with squirrel cage rotor Alternator power: 2368 kva Motor Power: 315 kW; 1200 kW; 2500 kW. Frequency: 50 Hz and 60 Hz Class: BV and DNV Excellent condition Stocked in Europe #siemens #power #marine #vessel #ship #motor #alternator #generator

Double-sided grinding and polishing bench MEYER type SMPMasch. No. 848 Year of construction 1963Shaft diameter 50 mmGrinding wheel holder 305 mmDisc spacing 1470 mmGrinding-polishing wheel diameter max. 800 mmWorking height 550 mmSpeed 710 / 800 / 950 rpm. Drive power 2x 3 kWNet connection 380 volts, 50 Hz.- two drive motors for each working side separately- star-delta switch for each drive motor separately- speed change by folding the drive belt- dust extraction flange 100 mm-

Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview 2020 rotary 24-valve volumetric unit with fixed nozzles and a 1-head crown capper, rated 6000 Bottles/hour. Configured for PET containers in 1 L format with neck 28 and clockwise rotation. Manufacturer: VARIOUS BRANDS, Model: 24.8 volumetric. Non-aseptic and non-isobaric operation for still products. This compact Second-Hand PET Filler is a rotary monoblock filling machine suited to detergents, liquid soap, oil, spreads and sauces, and still water lines. This used filler for sale is presented as installed; format and utilities checks are recommended prior to commissioning. Technical Specifications & Performance Data Configuration: Rotary monoblock with volumetric filler and integrated capper Manufacturer / Model: VARIOUS BRANDS / 24.8 volumetric Year: 2020 Container material: PET Formats: 1 L Product types:  ...

Professional position for the preparation, assembly, disassembly and maintenance of CNC tool holders. This set includes an industrial workbench, storage panels, and various specialized accessories used in CNC machine shops, precision mechanics, bar turning, toolmaking, and industrial maintenance. Ideal as a dedicated tool management position in a modern production environment. Auction-ID: A1-48554-320

Set including an industrial cantilever rack, a material trolley and a large stock of metal material. The set includes different sections of profiles, tubes, flats, round bars and other materials intended for mechanical, welding, locksmithing or metal construction work. This configuration makes it possible to immediately have a reserve of material that can be used for manufacturing, maintenance or industrial subcontracting. Ideal for: Mechanical workshops locksmith Boilermaking Industrial maintenance Metal construction Construction companies The racking also allows for efficient organization of the length storage. Auction-ID: A1-48554-231

Large set of clamping and assembly tools consisting of fixing plates, clamping cubes, precision brackets, machined blocks and positioning accessories. Set suitable for precision mechanics workshops, CNC machining centers, toolmaking, dimensional control or realization of specific assemblies. Interesting lot for industrial users, technical schools, methods offices and dealers of professional equipment. Content included according to photos. Auction-ID: A1-48554-415

Professional position for the preparation, assembly, disassembly and maintenance of CNC tool holders. This set includes an industrial workbench, storage panels, and various specialized accessories used in CNC machine shops, precision mechanics, bar turning, toolmaking, and industrial maintenance. Ideal as a dedicated tool management position in a modern production environment. Auction-ID: A1-48554-318

Professional position for the preparation, assembly, disassembly and maintenance of CNC tool holders. This set includes an industrial workbench, storage panels, and various specialized accessories used in CNC machine shops, precision mechanics, bar turning, toolmaking, and industrial maintenance. Ideal as a dedicated tool management position in a modern production environment. Auction-ID: A1-48554-316

Professional position for the preparation, assembly, disassembly and maintenance of CNC tool holders. This set includes an industrial workbench, storage panels, and various specialized accessories used in CNC machine shops, precision mechanics, bar turning, toolmaking, and industrial maintenance. Ideal as a dedicated tool management position in a modern production environment. Auction-ID: A1-48554-315

Professional position for the preparation, assembly, disassembly and maintenance of CNC tool holders. This set includes an industrial workbench, storage panels, and various specialized accessories used in CNC machine shops, precision mechanics, bar turning, toolmaking, and industrial maintenance. Ideal as a dedicated tool management position in a modern production environment. Auction-ID: A1-48554-321

A set of lifting and handling equipment for mechanical workshops, machining companies, industrial maintenance departments and machine manufacturers. The set includes a TECNOMAGNETE MaxX 500 permanent lifting magnet for handling ferromagnetic metal parts, as well as various lifting accessories including textile slings, chains and handling rings. This type of equipment is particularly sought after for loading, unloading, assembly of tools, handling of sheet metal, mechanical blocks and heavy industrial components. Auction-ID: A1-48554-402

Professional position for the preparation, assembly, disassembly and maintenance of CNC tool holders. This set includes an industrial workbench, storage panels, and various specialized accessories used in CNC machine shops, precision mechanics, bar turning, toolmaking, and industrial maintenance. Ideal as a dedicated tool management position in a modern production environment. Auction-ID: A1-48554-317

Consisting of Mitari 1000KG Equator, 3 x Kuplex 2-jump chain, 2 x Mitari 2-jump chain and various Mitari 4000kg, 3000kg, 2000kg, 1000kg lifting straps. Includes 2 x Rema 750KG Plate Clamps. Auction-ID: A1-49846-54

Stanford 5-part auger set 230mm and 460mm Bits, drills and chisels Auction-ID: A1-40897-5

Consisting of: 1x workbench, dim. approx. 305 x 250 x 73 cm 1x outdoor bar, dim. approx. 415 x 73 x 71 cm 2x 3-door refrigerator, dim. approx. 136 x 60 x 90 cm Particularities: NOTE: lot must be dismantled by the buyer himself Partly in basement Auction-ID: A1-47444-80

numbers and dimensions, see photos Auction-ID: A1-49374-191

Professional device TC3000 for the treatment of spider veins and rosacea, using high-frequency wave thermoregulation technology. Auction-ID: A1-49756-246

Ladies and gentlemen, Below you will receive a non-binding offer for railway spare parts for all common railway coaches and railway freight wagons new and partly used: Wheelsets All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. Inte ...

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

Cat. No. 09-1590-1 New Standard: - with residual outlet with inclined seat disc valve DN 50 - with cylindrical conical bottom at the bottom and top - Test pressure: 1.5 bar - permissible operating pressure: 0.49 bar - Material V2A AISI 304 - Surface inside and outside IIIC - With mannhole DN 400 with 6 screws, overpressure valve - Threaded connection connector DN 25 and with inclined disc valve DN 25 Cat. No. Content: Diameter: Ges.Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg On request with (please ask prices): Fermentation spandconnection DN 50 CIP Cleaning Fermented spundar fitting Trial tap For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight c ...

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

Cat.-Nr. 09-1590-1 new Standard Features: - with outlet with inclined seat valve DN 50 - cylindrical conical head top and bottom - test pressure: 1,5 bar - max. allowable operating pressure: 0,49 bar - material AISI 304 - surface inside and outside IIIC - with manhole DN 400 with 6 srews, over pressure relief valve, thread connection DN 25, with inclinded seat valve DN Cat.-Nr. Capacity: Diameter: Total Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg Surcharges/Unit: Fermentation Lock DN 50 CIP Cleaning System Fermentation Valve Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

in 2005 refurbished Still in operation: Yes Available: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Roller or belt conveyors shifting lengths approx. 25 m

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Kat. No. 09-1049-4 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 2,100 mms of weight: 136 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Kat. No. 09-1590-2 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws, Ueberdruckventil thread connection carbines DN 25 and with sloping seat discs valve DN 25 Kat. No. contents: Diameter: G flat height: Weight: 09-1590-2 800 litres 1,000 mms 1,550 mms 89 kg upon request: CIP Cleaning Connector fermentation fittings Fermentation lock DN 50 Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

PVS Micro cut type MC 12 E to chop up and Elmolgieren of various products like ketchup / Majonäse / sauces / soups / mustard engine 9 kW of speed 3000 / U min Tichter 165 litres with Verrohrung and 3 road valves for circulation procedure Anew machine

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Cat. No. 10-1070 New Complete continuous distillation and rectification plant (DRA) for the production of 10,000 Ltr/day - Fab.Eurolux Fine sprite or neutral alcohol made from starchy and sugary raw materials For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 09-1590-3 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 diameter: 1,000 mm contents: 1,000 mm height: 1,720 mm weight: 102 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece