flexo and rotogravure used for sale

SKF - Batch of automotive parts - drive shafts, bearings and pumps 135KG Auction-ID: A1-46070-131

Batch of heavy duty bearings and metal housings 363KG Auction-ID: A1-46070-280

Batch of abrasives Condition: unused Weight: 32KG net Auction-ID: A1-46070-133

OMES CEU 13 punching-shearing machine ; Eccentric machine with foot control; with punches ; suitable for cutting and punching work in steel ; Voltage: 380 volts ; Cutting capacity: 80 x 14 mm steel ; Solid round: 32 mm steel ; Punching capacity: 25 mm in 13 mm thick steel Auction-ID: A1-45170-42

Restoration project – Lamborghini Espada S2 (1972) A lot corresponding to the classic Lamborghini Espada S2 vehicle is offered, consisting of a restored chassis and various body elements. The chassis has been restored , which forms a solid basis for the rebuilding of the vehicle. The rest of the components are in a used and partially incomplete state, as shown in the photographs. Important note: The engine is not included in this lot. This is an excellent opportunity for collectors or professionals in the classic vehicle sector, aimed at a complete restoration project or use as a source of parts. Status: Material used. Chassis restored. Other components unverified. Possible incompleteness. Additional Information: Untested operating conditions. On-site inspection is recommended. Terms of Sale: Sold in the \"as is\" condition, without warranty or claim.  ...

SKF, FAG, INA - Batch of industrial bearings and components 190KG Auction-ID: A1-46070-230

Schneider Electric - Batch of installation materials, emergency lighting and data cabling & electronics Auction-ID: A1-46070-33

Batch of galvanized steel brackets, clamps and mounting plates (453KG) Weight: 453KG net Auction-ID: A1-46070-295

1x 24130CCK30/W33 SKF 80x 39433 SKF 96x BA2B445469BA SKF 2x TSN613GE SKF 24x F213 FAG 18x FG56210.114 FAG 20x HJ2320 FAG 132x F-110488 INA 4x F-110488 INA and more Auction-ID: A1-46070-67

Endress + Hauser - Batch of various flow meters and pneumatic components Auction-ID: A1-46070-47

Cooper / SKF - Batch of industrial bearing housings and bearing components 343KG Auction-ID: A1-46070-187

FAG, Gates - Batch of industrial and drive parts 67KG Auction-ID: A1-46070-284

HFH, HIWIN, KG, URB, JNS, ISB, - Batch of various bearings and bearing components 221KG Auction-ID: A1-46070-319

FAG, SKF, NSK - Batch of bearings and bearing housings 298KG Auction-ID: A1-46070-303

Batch of mixed industrial electronics and components Auction-ID: A1-46070-19

Schneider Electric - Batch of switching and installation material & electronics Auction-ID: A1-46070-8

SKF, FAG, Torrington - Batch of industrial bearings and seals Auction-ID: A1-46070-251

NTN, SKF, NSK, Torrington - Batch of industrial bearings and bearing blocks Auction-ID: A1-46070-289

Toprol - Batch of industrial bearings and bearing blocks 187KG Condition: unused Auction-ID: A1-46070-147

19x 6207-RS1/MT33BR196 SKF 1106x BB1-0219CA SKF 120x WC87504 SKF 50x 212.2ZN FAG 1000x 535697D FAG 200x 543664.C3 FAG 97x 549172 FAG 200x 6200ZNR FAG 111x 6303RSR. C3 FAG 54x 6307E. TVH. C4 FAG 14x EC-6901ZZ C3/2A NTN 580x 6000T1X Z CM NSK 23x 6206RS C4 Koyo 50x 6213Z NR C3 Koyo and more Auction-ID: A1-46070-65

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Root End Reducer B&Z Type WRP SO Well-preserved fully functional root end reducer made by Baljer and Zembrod. Built in 2004. Complete with control, disposal scraper conveyor straight approx. 8.0 m and ascending approx. 6.0 m. Including hydraulic log ejector. The hydraulic power unit with 15 kW is included in the scope of delivery, we also have the remote control for the control of e.g. sorting trolleys. Complete steel substructure. Length of milling shaft 1,380 mm. Drive of milling shaft with 75 KW motor. Feed motor slewing gear with 4.5 kW. Drive scraper conveyor with 3.0 kW.

Groninger plastic bottle filling & capping line comprising ZSB 2000 empty bottle unscrambler, DFV 10005Q in-line filling machine with 10 filling stations with cross-feed function, dosing range of 5 to 1000 ml, bottle height from 30 to 250 mm, transport cup dimensions (pucks) 108 x 80 mm and KVK 106 rotary capping machine with 6 capping stations with ZSK 1500 cap sorter and a lift-off conveyor for the transport cups (pucks), capacity up to 150 bottles per minute

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Working area: 1800 x 1000mm; dimension machine: 2600 x 2100 x 1200mm; automatic material feeder dimension: 2700 x 1200 x 1500mm; Auction-ID: A7-45992-140

2 packs Rock cupels with all. retinato diam. 140 mm th. 30 mm MTL 7; 1 pack diam. 160 mm th. 30 mm MTL 7; + 3 pcs various sizes - - Footboard 80 x 120 x H100 Auction-ID: A7-46421-36

Measuring and scribing tools Lot of 13 pieces With ATORN, Mitutoyo, PREISSER and othersMixed lot of 13 measuring and scribing tools for workshops, toolmaking and quality control. Included are a ATORN hair ruler 500 mm DIN 874/0 INOX, a Mitutoyo caliper 150 mm, a U-screw gauge with adjustment bracket, several precision angles as well as scribing tools and gauges. Auction-ID: A7-46417-294

Lots of industrial drills & modular systems (Sandvik, Kennametal) Mixed tool set of high-quality industrial drills: – several Sandvik WSP drills R411.5-27534 – Kennametal KSEM modules + interchangeable heads – various solid carbide twist drills Holex / Sandvik– large HSS/PM twist drills up to approx. Ø30 mm – reamers and special drills 1) Sandvik Coromant several WSP drills R411.5-27534, Ø ~27 mm, beam P20 various large twist drills 18–30 mm Single solid carbide drills in a yellow case Drills in the range 20–25 mm (coated, TiN/TiAlN) 2) Kennametal – SE-Drill Modular KSEM1983HPM – Ø19.83 mm KSEM1830HPM – Ø18.3 mm KSEM1100HPM – Ø11.0 mm several modules + interchangeable heads KC7235 modular holders (2 pieces) 3) Holex solid carbide twist drill bit 122310 19.5 mm other solid carbide twist drills 17–20 mm 4) Other tools Indexable insert drills (with mounted  ...

2× Machine vise BB 120 and 90 mm     •    Design: machine vice     •    Adjustment: manual, degree scale available (with a vice)     •    1× jaw width approx. 120 mm     •    1× jaw width approx. 90 mm     •     Solid cast/steel construction     •    Manual spindle actuation Auction-ID: A7-46417-107

Manufacturer: Mitutoyo Type / Model: Digital measurement setup with Digimatic dial gauge ID-C150B Manufacturer's specifications dial gauge • Model: ID-C150B • Code no.: 543-460B • Measuring range: 0 – 50.8 mm • Resolution: 0.001 mm • Measuring system: Absolute (ABS / INC) • Display: Digital • Data output: Digimatic • Power supply: Battery (button cell, inserted) • Country of manufacture: Japan Measuring setup / scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Precision measuring stand with cross arm • Mitutoyo Digimatic mini processor / printer DP-1VR • Granite measuring plate (integral part of the device) • Foot switch • Connection cable • Mitutoyo mini processor / printer DP-1VR (incl. connection cable) Technical data granite plate • Material: granite • Size: approx. 400 × 400 × 60 mm (L × W × H) • Solid design • Flatness clas ...

\" Heavy workbench 2000 x 700 mm with 6 drawers and cabinet and Sandvik Coromant Capto C6 clamping block / pick-up block type: 391.530-C6 Use: For securely holding and fixing Coromant Capto C6 tool holders (e.g. for presetting, storage or workbench mounting). Stable industrial workbench with solid wooden worktop. Design: • 1-door base cabinet left • 6 drawers right (3 + 3) • Sheet steel body • Solid wood worktop Dimensions: 2000 x 700 x 860 mm Condition: Used with clear signs of use. Worktop with pressure marks, scratches and wear on the edges. drawers functional. Without content and without keys. Overall dimensions: approx. 2000 x 700 x 860 mm (L x D x H) Type: Steel substructure with wooden top Colour: Body light grey / Front turquoise \" Auction-ID: A7-46417-376

4 pack insulation pipe K-FLEX 25-089 AL CLAD; 1 K-FLEX EC/1.10 insulating tube box - Packages may not be complete - Footboard 80 x 120 x H180 Auction-ID: A7-46421-33

Mitutoyo digital measuring system consisting of an ABSOLUTE digital dial gauge ID-C112B, mounted on a measuring stand with granite top, including Digimatic mini processor DP-1VR with integrated print function. The system is intended for precise measuring, comparison and testing tasks in the measurement and quality sector. The granite slab is part of the measurement setup and is included in the scope of delivery. Condition • Used Scope of Delivery • Mitutoyo Digital Dial Gauge ID-C112B • Measuring Stand • Granite Slab (300 × 200 × 50 mm) • Digimatic Mini Processor DP-1VR with Push Function • Connection Cable Digital Dial Gauge • Manufacturer: Mitutoyo • Model: ID-C112B (ABSOLUTE) • Code: 543-250B • Measuring Range: 0 – 12.7 mm • Resolution: 0.001 mm • Measuring System: Absolute Measuring System (ABS) • Display: Digital • Data Interface: Mitutoyo Digimatic ...

\" Mixed lot of measuring screws and measuring equipment – 5-part – mechanical – special designs – used 5-part bundle of mechanical measuring equipment, consisting of shackle measuring screws and special/special measuring screws (including with a large round scale). • Type: mechanical measuring screws / special measuring screws • Reading: usually 0.01 mm • Measuring ranges: mixed (e.g. 5–30 mm, see pictures for other ranges) • Design: \"Metric \" Auction-ID: A7-46417-221

Stock 8 pcs: 4x FWXT20ABTV3 + 4x FWXT15ABTV3 - - 125 x 90 x H110 cm Auction-ID: A7-46421-8

2x boxes; Blue tube for air and brake fluid Auction-ID: A7-45992-146

\" Mitutoyo Digital Dial Gauge ID-C150B with Measuring Stand and Granite Measuring Plate Digital dial gauge from Mitutoyo with associated measuring stand and granite measuring plate. The unit is set up as a complete measuring station and is delivered together. • Used • Dial gauge can be switched on, display available • No calibration or measurement test carried out • Mechanical parts movable • Optical traces of wear present Scope of delivery • Digital dial gauge Mitutoyo ID-C150B • Measuring stand with bracket • Granite measuring plate Digital dial gauge • Manufacturer: Mitutoyo • Model: ID-C150B • Code no.: 543-460B • Measuring range: 50.8 mm • Resolution: 0.001 mm • Display: Digital • Functions: Zero/ABS, Preset, mm • Origin: Made in Japan Measuring stand • Mechanical measuring stand with round column • Height adjustment via clamping • Side boom f ...

11x VKBA1361 SKF 1x VKBA1436 SKF 1x VKBA1436 SKF 9x VKBA1485 SKF 1x VKBA3907 SKF 1x VKBA3907 SKF 8x VKBA625 SKF 5x VKC2083 SKF 140x VKC3620 SKF 1x VKMA04200 SKF 1x VKPC83428 SKF 1x VKPC83615 SKF 3x VKPC84208 SKF 2x VKPC84618 SKF 2x VKPC85611 SKF 3x VKS6150 SKF 2x F-112215 INA 4x F-203222.5 INA 9x F-83001.2 INA 1x 38KWD02G3CA126 NSK 10x CBU472921C Koyo and more Auction-ID: A1-46070-354

Stable, vertical unwinding and cutting stand for corrugated cardboard, suitable for rolls up to approx. 100 cm high and approx. 60 cm web width. With integrated cutting unit (OCS) and guide profiles for clean unwinding.   Manufacturer marking: OCS (label \"OCS 98004\") Material width: approx. 600 mm (measured) Roll height: approx. 1000 mm Suitable for: 1-wall or 2-wall corrugated cardboard from the roll Auction-ID: A7-46417-33

Lot of inserts consisting of a mixed stock of different inserts in original packaging. Included are different manufacturers, geometries and ISO grades. Partly unopened, partly opened packaging. The item is handed over in its entirety as shown. Content (excerpt from visible brands/types): Sandvik Coromant – numerous ISO plates (PMKNSH), various geometries and grades (e.g. 1044, 12055164, 880-05 06 05H-C-LM, etc.) Walter – ISO plates, including WXP45 and other grades Wohlhaupter – inserts for fine boring tools (XOMT12T308, WHC102 and others) Korloy – various milling and turning inserts Wetec / JD-Tools – ISO plates of various geometries Other manufacturers such as Innotec, Nine9 etc. General features: mixed stock of indexable inserts many original packaging available partly full, partly opened packs Manufacturer mix, mainly branded goods Condition: mostly unused (visible), indiv ...

Industrial control terminal in steel design, free-standing mounted on a column. Equipped with lockable front door with viewing window as well as pull-out keyboard and mouse tray. Inside there is a monitor, PC hardware as well as connection and power supply components     •    Type: free-standing operating terminal     •    Material: sheet     steel •    Front: viewing window, lockable     •    Keyboard tray: pull-out     •    Equipment: Monitor, PC, keyboard, mouse (without functional guarantee)     •    Power supply: 230 V     •    Mounting: floor-standing (stand) Size: approx. 800 × 750 × 1,650 ...

Including welding machine, pressure vessel, welding helmet and jacks Auction-ID: A1-41682-69

Lot solid carbide drills and thread mills Manufacturers: SIEVERT, HOLEX, Sandvik, WALTER and others Drills: from 3 to 11 mm Thread mills: from M3 to M12 approx. 10.0 kg Auction-ID: A7-46417-16

\" Double-spindle deburring machine / grinding and brushing machine Stationary deburring or grinding machine in heavy industrial design with two horizontally arranged spindles. A main spindle with clamped abrasive media, an additional spindle (according to the switch \"additional spindle\") can be switched on separately. Machine with protective tray/work tray, emergency stop, main switch and separate control cabinet. Extraction connection available (pipe connection on the side). Control panel with: • Main switch • Emergency stop • On/off button • Switch additional spindle • Brake switch • Operating hour meter (Kübler Codix) Solid welded steel construction, can be screwed together stably. Used condition with usual signs of wear. External dimensions approx.: 1200 x 1100 x 1300 mm (W x D x H) Double-spindle design Electrical connection via separate control cabinet Extraction  ...

\" Large batch of measuring and testing equipment – angles, thread gauges, hair angles, scribing tools, accessories Lots of various measuring and testing equipment from workshop stock. Included are hair angles (partly TGL, Made in GDR), precision angles, several small stop angles, thread gauges (including Whitworth 55°), feeler gauges, scribing tools, a Mitutoyo dial device (5 mN), various cutting and blade tools as well as numerous protective cases. • Hair angle with marking TGL 6163/1 – Made in GDR • Several precision angles in different sizes • Thread gauges \"Whitworth 55°\" – Made in Germany • Feeler gauge set (0.05 mm visible, among others) • Mitutoyo measuring device, type 546-113, 5 mN • Various small L-brackets (different dimensions marked) • Marking blades / cutting tools in wooden case • Some with protective cases \" Auction-ID: A7-46417-316

\" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm \" Auction-ID: A7-46417-373

Bundle of compression springs for tool and mould making   The pictured cabinet is not part of the offer. Quantity: approx. 112 pieces of storage viewing containers, each filled Content / Description • Extensive collection of compression springs for tool and mould making • Different diameters, lengths and spring thicknesses • Sorted in mixed colour storage viewing containers • Partly labelled (internal article numbers / dimensions) • Material apparently spring steel, suitable for industrial use No individual counting, no measurement, no variety or completeness guarantee Sale exclusively as a complete bundle, no partial sale.   The sale is without a cabinet   Contents: Sorted stock of compression springs for tool and mould making. The springs are labeled according to spring class (light, medium, heavy, extra heavy), outer diameter and free length.  ...

Tool holders and clamping adapters for BAZ special tool holders and clamping adapters for machining centres of the STAMA-MC series (including MC 440). Stock: Mixed lot with approx. several tool holders, chucks, reducers and spindle adapters. Typical designs include: STAMA special adapter with bayonet/form-fit contour Chuck with slotted clamping heads Reduction adapter for STAMA unit interfaces Mounting elements for special tools Tool carrier with STAMA logo and part numbers (including 150 864 / 150 865) Auction-ID: A7-46417-30