flexo and rotogravure used for sale

Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long

Capacity: 2 x 2.70 m. 3 x vertical pushers 2 x horizontal pushers Pneumatic Mobile

Capacity: 3000 x 1900 m. 4 x horizontal presses 2 x vertical pressure beams Hydraulic pump with 3 kW motor

Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1?) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2?) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

Motor: 5.5 kW Speed: 2980 rpm Input diameter: 25 cm Output dimensions: 30 x 20 cm With mounting bracket With control box

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x 4 perpendicular stop rollers 4 non-driven feed rollers 1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/s Working height 70 cm Electrical cabinet not included

In stock on pallet, total dimensions approx. 1200x800x530 mm Auction-ID: A1-45790-598

In stock on pallet, total dimensions approx. 1200x800x1130 mm Auction-ID: A1-45790-560

1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.

Bread slicer MHS Ideal L Stainless steel version Simple technology only DGUV V3 tested by us Connection 400V, 16A CEE plug Used machine cleaned & SAB tested with warranty + spare parts service

Tetra Pak's CAP 30 Flex is an optimal closure solution for attaching the cap to your container. The CAP 30 Flex is set to 1000 Slim HeliCap 23.

The Tetra Pak TBA/8 110V is a proven aseptic linear filling machine for liquid foodstuffs, which is particularly known for its reliability. It is often used in dairies for UHT milk, juices or similar products.

For many years, the TCAP 45 has been considered one of the preferred closure variants for one litre Prisma packs. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. These newer closures automatically cut through the "pre-punched" layer of the pack when opened. Easy to open and reseal, this closure is practical and modern in use. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Banding / Banding Machine ATS Tanner Type US 2000 AB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven technology. Strip tension infinitely adjustable via potention meter/rotary regulator. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

For many years, the TCAP 47 was considered one of the preferred closure variants for one-liter packages. However, when using one-liter Slim packs, this closure is disappearing more and more from the manufacturers' ranges. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. This new HeliCap 23 cannot normally be applied with the existing TCAP 47. However, we are able to convert the existing TCAP 47 for the new HeliCap23 with our workshop team. After that, you can continue to operate your filling line without a PT, which also saves service costs on the PT. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive ...

The TCAP 21 ReCap 2 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 2 combines benefit and cost awareness. In addition, the product is given a secure closure solution. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The further development of the practical ReCap solutions in an even more user-friendly design. Better product flow makes it easier to use. The TCAP 21 ReCap 3 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 3 combines benefit and cost awareness in optimized product design. In addition, the product receives an optimized secure closure solution. Suitable options: conveyor belt system and cardboard packer with or without wrap around, tray shrinker and other equipment. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The straw applicator is the perfect solution for straw application. It is installed between the filling machine and the packaging machine and has servo motors and one or two inverters. The regulated and controlled application of the straw is thus perfectly possible. For years, this unit has been one of the most popular on the market. The constant and trouble-free speed of up to 7500 units/h is ideal for use in conjunction with the TBA 19 filling machine. To ensure that everything runs smoothly, we recommend installing a conveyor belt volume of at least 20m between the filling machine and the applicator. All components were checked and tested. The range can be used for different volume sizes. For this purpose, various components have to be replaced, which we are happy to do at the customer's request. On request, we can provide extensive services. In addition to consulting and plannin ...

This is a power unit with 2 servo motors. The TSA 46 applicators have a compact design and are very reliable. Trouble-free operation in a filling line is guaranteed even with long operating times. We have different variants of straw applicators in our warehouse. Regardless of the condition, all devices undergo a service in which the perfect status is established. For this purpose, wear parts are also replaced and finally various test runs are carried out for later use. Since the package size and also the type of straw vary, we can only assemble the final format parts after an order. If you are interested, please let us know for which format you want to use a TSA 46. We will make you an offer immediately. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a deta ...

Tetra Pak Cardboard Packer 32, CBP 32, V40, in very good condition and workshop inspected and overhauled. Available now.

Tetra Pak (opt. WRAP AROUND) Tray Packer TCBP 70, convertible to many sizes. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The Tetra Pak MultiShrink 62 is an industrial shrink wrapping machine used in filling and packaging lines for beverages and liquid foods. Multipack formation (e.g. 3×1, 4×3 arrangements) Film packaging + shrinking for stable containers In-line operation in automatic production lines High speed for large production quantities Beverage industry (milk, juice, plant-based drinks) Formation of transport and sales packaging Stabilization of products for storage and shipping

On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The Tetra Pak EasyRide Conveyor is a specialized conveyor system designed for the efficient transport and buffering of beverage cartons in aseptic filling lines

On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The Tetra Pak Easy Ride Conveyor is a conveyor belt system specially designed for the transport of beverage cartons in aseptic filling lines. It serves as an efficient solution for handling and buffering packaging between the different stations of the production line. The Tetra Pak Easy Ride Conveyor is often used in combination with other Tetra Pak machines such as the TBA8 or TBA19 filling machine. In such systems, the Easy Ride Conveyor takes on the task of efficiently transporting the filled and sealed cartons and buffering them between the various production stations. This helps to optimize the production process and minimize downtime. This model is a custom made by TetraPak. It is very space-saving and functional.

On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

On offer is a flour storage and dosing system from professional bakery production, used. It is an interconnected industrial plant for the storage, dosing and weighing of flour. The plant is designed as a functional system and is suitable for bakeries, food production and industrial dough production. Extensive documentation available (including manufacturer's documentation, explosion protection documentation). Plant components: - 3 flour silos (REIMELT/ Daxner) outdoor area, metal version) - 2 REIMELT flour dosing and weighing systems - Hoppers, dosing devices, discharge units - Pneumatics, pipes, valve technology - Weighing units and controls Modernization: Extensive technical overhaul and investment in the plant (piping, components, etc.). The plant is currently located at our customer's site in Pasewalk and is being sold due to restructuring. A viewing is expressly recom ...

Conveyor belt systems 21 or 23 according to the desired layout. For the selected asset or your existing lines. Curves, switches and drives can be adapted according to your wishes. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Tetra Pak THX21, Helix accumulator, 1500ml/1000ml (and smaller). In its function, the Helix accumulator THX21 collects the packaging between the filling machine and the downstream equipment. In doing so, it ensures that downtimes of the filling machine are reduced and that no damage occurs to packaging in waiting positions. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Used root vegetable washing and peeling line with a capacity of about 5 T/h The line includes: DRUM WASHER WITH ELECTRIC MOTOR. - TYPE LTJ-840 DL.3600,WIDTH 1100,H.1950, Manufacturer: GATINEAU FRANCE, Year: 1980 Flat conveyor SCREW POWER PEELER WITH MOTOR. ELECTR. - TYPE YAI1056 BE A6/1 DL.5200, Manufacturer: GATINEAU FRANCE Year: 1980 STEAM PEELER WITH MOTOR. ELECTR. - TYPE PVR-900L DL.3000,WIDTH 2000,HEIGHT 5750, Manufacturer: GATINEAN FRANCE Year: 1980 OUTPUT SCREW WITH PEELER WITH ELECTRIC MOTOR - TYPE YAI 1056 BEA4/1 DL.7500, Manufacturer: GATINEAU FRANCE Year: 1980 Brush wipes 2pcs Inspection Conveyor

Key data: 54 KW, 60 kVA, 400 V

Remeha Gas Generator ELW 50-100 Gas electricity and heat generators from 2016, 32,728 operating hours, closed module. 1 available 50 KWel x 1,500 rpm, 400 V / 50 Hz. Manufacturer: Remeha Model: ELW 50-100 G2488 (identical to 2G G-Box 50) Type: Gas Electricity and Heat Generator Serial Number: MH0316C-EMEB-050356 AC generator (asynchronous): 2G WKASYG250/4-330T-GG AC generator speed [1/min]: 1,517 Engine: MAN E0834E302, 54 KW Power [KWel]: 50 Power [KWth]: 100 Voltage [V]: 400 Current [A]: 73 Frequency [Hz]: 50 Year of Make: 2016 Hours: 32,728 Weight unit [kg]: 1,800 Dimensions LxWxH [m]: 2.80 x 1.20 x 2.10

Machine – Orbitalum RA 41 Plus - Branded device: Orbitalum - Model: RA 41 Plus – Pipe cutting and beveling machine - Saw blade is with chamfer (see picture), no information about the saw blade for condition or wear - Year of construction: 2007 - Condition: used, with usual signs of wear - Function: fully functional (see video) - Documentation: available - with original box and gear oil from the manufacturer - Accessories: Quick mounting plate, transmission oil and pads complete - Application: Industrial / pipeline construction / precise cutting & chamfering Auction-ID: 04K-HSQ-1

CNC Bar Machining Center for Aluminum, Machine No. 6100013187, control Beckhoff C6140 renewed in 2020, infeed of extrusion profile magazine length max. approx. 6000 mm, machining units (drilling / milling: vertical top 1 piece / vertical bottom 4 pieces / horizontal front 1 piece / horizontal rear 1 piece) and (sawing 3 pieces: 45 / 90 / 45 degrees), outfeed belt max. approx. 2700 mm, chip conveyor belt (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Mediation of dismantling and loading possible. Contact: Dejan Ducic / dejan.ducic@surplex.com Auction-ID: A7-45878-14

Tractor — From the rating plate: Brand: VST (VST Tillers Tractors Limited) Type: Fieldtrac 180D VIN/Chassis number: MZCV2JJR2CH000016 Vehicle category: T2a Max. loaded mass: 1400 kg Max. load axle 1: 588 kg Max. load axle 2: 812 kg Towbar B1: 1100 kg / B2: 3000 kg 4WD: ✅ Front loader: ✅ (QIB brand, visible in photo) Gearbox: Mechanical (multiple levers visible) Cab: ☐ — ROPS ✅ Hour reading: new/0 hour (still in plastic) Year of construction: 2025 HS Code: 8701.91 Schijveneg — Bel-Agro HRTS130: Brand: Bel-Agro Type: HRTS130 Serial Number: 2501015004 Year of construction: 2025 Weight: 250 kg Working width: ±130 cm Drive: Cardan shaft PTO HS Code: 8432.21 Auction-ID: A3-43516-11830

A vertical bag packaging machine Aquarius is available. Bag width range: 80mm-250mm, max. bag length: 450mm, packaging capacity: approx. 140bags/min, bag material: film, packaging product: bulk goods/piece goods. An on-site inspection is possible.

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

Consisting of a TBA 8 V110 1000ml Square filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 V110 1000ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Wall and air layer anchors various. Grades, wood screw anchors, wall connectors, shelf contents (except separate items)

Consisting of a TBA 8 V100 LSC 1500 ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.