flexo and rotogravure used for sale

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

FABBRI hot air generator model F120: - for the indicative surface to be heated about 500-600 square meters (or about 3000 cubic meters) - Nominal firebox power 150,000 kcal/h - Thermal power output 120,000 kcal/h - air flow rate 8900 mc/h - Air fan HP 3 - Fume fan HP 0.75 - air hose diameter 3 x D=250mm - chimney diameter D=200mm - overall dimensions about 1.7 x 1 m, h=2 - weight about 615 kg Year 2018, to CE regulations Availability from June 2026

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

TECHNICAL DATA: Usable width: 400 mm Installed power: 1.5 hp

Consisting of 2 x Söhngen spine board and 3 x rescue water/roof rotor carrier Auction-ID: A1-45495-245

Machine name: Combined heat and power plant used Manufacturer: SEnergie GmbH Type: G6.12TI Year of Make: 2008 Generator: NEWAGE STAMFORD Generator Type: UC. I274D2 Generator kW: 100 kW Fuel Type: Sewage Gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88.9% Dimensions: L 3,500 x W 1,100 x H 2,500 mm Curb weight: 3,000 kg Tech. Documentation: Yes Note: In 2018, a new engine was installed and the generator was rewound. Last service 15.10.2021 at 86,102 h Accessories: A control cabinet Condition: Used Price: On request

Used line for bottling juices into Tetra Rex cartons. 7.000 pcs/h Specifications: Tetra Rex Filling Machine: Type: Tetra Pak TR/27 Year of manufacture: 2016.11. Capacity: 7000 pcs/h Formats: 1 l, 0.5 l 2 Tray Making Machine: Type: Cardboard Packer 32 by Tetra Pak Year of manufacture: 2016.10. Formats: 23, 43 Conveyor 2: Type: Conveyor Control System Year of manufacture: 2016.10.

Contents: 9 x Pfannenberg outlet filter, 4 x electronic assembly, Brand: Siemens, Model/Type: IIB-T2, 2 x Fans, 1 x Grease Pump- 15 L, 2 x First aid kits, among others. Auction-ID: A1-45495-371

Clean CUT SA-600 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Clean CUT Model: SA-600 Year of manufacture: 2001 X-axis travel: 610 mm Y-axis travel: 630 mm Z-axis travel: 350 mm Dimensions: approx. 1900 x 1900 x 2700 mm Table: 950 x 500 mm Transport dimensions: approx. 1900 x 1900 x 2700 + 1 pallet Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-10

Charmilles Robofil 510 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Charmilles Model: Robofil 510 Year of manufacture: 1995 Workpiece weight max.: 300 kg Electric connection: 380 V Approx. machine weight: 3350 kg Table dimensions: approx. 700 x 500 mm Maximum workpiece height: approx. 310 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-5

Range consists of chain hoists, 1x universal electric scissors, GEDORE torque wrench, 1 x Mentor Visual IQ, including a lattice box. Auction-ID: A1-45495-269

Included: Pallet Auction-ID: A1-45495-392

Range consists of 5 x Tristar electric heater and 1 x dehumidifier from Komerci Auction-ID: A1-45495-259

included: lattice box. Auction-ID: A1-45495-286

Composed of electrical panels and transformers for medium voltage systems SEE PDF FOR LIST AND DETAILS Auction-ID: A7-45494-3

included: lattice box. Auction-ID: A1-45495-284

3 x Hydraulic Bolt Tensioning Cylinder from ITH with Case, 2 x Hydraulic Pump from Hytorc Auction-ID: A1-45495-364

Contents: heating mat, outer jacket cutter set, Bastechnic external/internal puller set, label printer, Testo measuring device, among others Auction-ID: A1-45495-365

Included: Pallet Auction-ID: A1-45495-386

Contents: Filling and tester, tester Tektronix, 5 x Brady SafeKey padlocks for lockout-tagout (LOTO) applications, 2 x first aid or emergency kit with case, 1 x AEMM measuring device among others Auction-ID: A1-45495-366

Content: Auction-ID: A1-45495-376

included: lattice box. Auction-ID: A1-45495-272

Cleancut EDM650 CNC Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Cleancut Model: EDM650 CNC Year of manufacture: 1999 Serial number: 904669 Electric connection: 380 V / 50-60 Hz Amps: 150 A Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-17

Range consists of 2 x Hydraulic Pump, 1 x Unitest Testing Device, 1 x Ultrasonic Flowmeter Fluxus F601, 1 x Electric Screwdriver Auction-ID: A1-45495-281

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

Model: TRC1500/600 Year: 2002 Condition: Used Serial Number: 1790 Stock Number: 3213 Belt width: 600 mm Transport length 1500 mm Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1600 x 850 x 1000 mm Weight; 135 kg

Hydr. Dent / Damage Repair Kit This comprehensive dent set is indispensable for many repairs. The dent set is fully filled with many quick couplings, so you can get started right away. Bending, pushing, straightening, spreading, pushing and pulling is no problem with this powerful set. The set comes with a pump with safety valve, hose and various extensions. Capacity 4 tons. Packaging dimensions 59 x 35 x 18 cm. Weight 20 kg. The printing cylinder is 30 cm long. This can be extended with a number of included extensions. The lengths of these extensions are: 8 cm, 13 cm, 25 cm, 45 cm and 53 cm . Condition: never used / new (5) Auction-ID: A1-45681-731

2 pieces of natural gas CHP in container Engine: Jenbacher J420 Engine version: B25 Power each: 1339 kW at altitude 1900 meters, at NN the power is 100 kW higher! Year: 2013 Generator: Leroy Somer LSA 52.2 L70 4P with 1970 kVA power Voltage: 400 V Hours: 13200 and 15600 The power generators were regularly serviced and checked. The systems are dismantled and immediately available. Subject to prior sale - errors possible! Internal reference number: E-1004-114

Year: 2005 Condition: Used Serial Number: 08060.01.01.00 Stock Number: 2597 Lifting height 1650 mm Sliding on rails Container: 200 litre tote bins Power: 3 x 400V, 50Hz, 0.75kW Dimensions: 1400 x 3150 x 2600 mm

Belt and internal grinding machine, oscillating, with several grinding inserts. Condition: never used / new (5) Auction-ID: A1-45681-801

Hydr. Dent / Damage Repair Kit This comprehensive dent set is indispensable for many repairs. The dent set is fully filled with many quick couplings, so you can get started right away. Bending, pushing, straightening, spreading, pushing and pulling is no problem with this powerful set. The set comes with a pump with safety valve, hose and various extensions. Many accessories in a very practical and robust carrying bag Capacity 10 tons. Packaging dimensions 72 x 40 x 20 cm. Weight 32 kg. Condition: never used / new (5) Auction-ID: A1-45681-726

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm x 210 mm Weight:  ...

Steel Storage Structure for Plates and Materials Type: Structure for storing plates and materials Material: High-strength structural steel Profiles: Welded rolled or tubular steel sections Construction: Reinforced structure with horizontal and vertical bracing Finish: Anti-corrosion paint or epoxy coating Height: 2,000 mm – 4,000 mm Width: According to number of storage bays Depth: Adapted to sheet dimensions Capacity per level: Variable (e.g., 1,000 kg – 5,000 kg per compartment) Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-45

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

Jitem P-50 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Jitem Model: P-50 X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Approx. dimensions (L x W x H): 2220 x 2300 x 2150 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-29

Freezing capacity 4.18 kW, capacity up to 180 kg, refrigerant R404A, incl. cooling unit (1220x870x1040 mm) Auction-ID: A7-45702-3

Voltage 400 V, freezing capacity 4.56 kW, capacity up to 180 kg, refrigerant R404 A, incl. FRIGO SYSTEM RKNQK1008CS/LS cooling unit (1400x800x950 mm) Auction-ID: A7-45702-5

Freezing capacity 4.56 kW, capacity 180 kg, refrigerant R404A, incl. cooling unit (1200x800x1050 mm) Auction-ID: A7-45702-4

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Dough divider and rounder Fortuna Primus Pro 6 Year of Make: 2015 Condition: cleaned and tested 6-row head machine Hopper volume: 40 kg Maximum hourly output: 9000 pieces Weight range: 40-100g Touchscreen control with recipe memory With flour and pressure roller at the outlet Adjustment of the weight and the effective chamber height via hand crank Machine on rollers, mobile with brake

Work and assembly table wood self-made approx. 250x100 cm, steel base, electrification

Bag filling and sealing machine Rianta PS Mako BFS 300 Year of Make: 2020 Condition: cleaned & tested Suitable for 2-core paper or plastic clip tape, 8mm wide, wire diameter. 0.6-0.8mm Capacity: 35 packs/min (depending on product) Max. product dimensions (LxWxH): 450 x 230 x 140 mm Air blower to open the bags Date Printer Incl. inclined conveyor belt, type: SF 1500

Work and assembly table wood self-made estimated approx. 400x100t cm, base frame 4 steel trestles

Water mixing and dosing device Langheinz Aquamix 32 Fully automatic water mixing and dosing unit with three inlets, demand-controlled flow and numerical input keypad Condition: new sealing rings, dirt screen and battery. Maintenance carried out. for connection to the drinking water network Intrinsically safe according to DVGW for mixing and dosing ice, city and hot water with automatically controlled flow that can be switched off Automatic Repeat and Partial Repeat numeric keypad 0-9 Housing material AISI 1,403 with 3 water temperature inlets

Dough divider and rounder King Grande Rex T3 Year of Make: 2021 Condition: cleaned & tested Extended model of the Basic Rex for processing high dough weights Also suitable for pizza, baguettes and other products 3-row head machine Max. hourly output up to 2160 pieces Stamp size SK 95 Weight range: 135 to 320 g

Double work and assembly table wood self-made, 1 table approx. 400x100t cm, 1 table approx. 300x100t cm, small contents consumables