126,618 used machines on RESALE, but how to find them? Machine Search
Max. work-piece diameter: 254 mm Max. distance between centers: 1066 mm Max. length of grinding: 1041 mm Max. capacity of collet chuck: 38 mm Dimensions of standard grinding wheel: 408x25x205 mm Limits of grinding head turning: 45 degrees Centre tapers: Sea #4 Thread pitch: 0.42 – 305 mm Max. pitch correction: 0,1 mm on 100 mm of length Adjustable backing-off: 0-5mm Number of rotation speeds of grinding head: 20 Range of speeds of workpiece slide: 1/3 – 60 rpm Speeds on back-run: 25.4; 80 rpm or working speed Work-piece slide motor capacity: 0.75 HP Grinding head motor capacity: 3.5/1.25 HP Max. obliquity: 1:12 Width limits of grinding wheel: 9.5–75 mm Range of grinding wheel speeds: 850–1540 rpm Internal diameters processable: 19–228 mm Max. diameter of hobs: 178 mm Max. diameter of thread chasers: 254 mm Coolant tank capacity: 136 liters Dimensions: -L ...
SMIPack FP560A L sealer and shrink tunnel 2011, Semi auto L sealer, sealing bar 560mm x 430mm, max pack height 230mm, up to 1500 packs per hour, mobile, 1ph, then feeds onto SMIPack T450 shrink tunnel, adjustable temp and speed controls, mobile, 3Ph
Leather Spilitting Machine. Camoga 520L+AS. New in 2016, light use since 2023. 520mm working width.
Cutter Rex Düker Hydro 100, completely in stainless steel, with ejector, bowl capacity 100 litres, Stepless knife speed, mixing gears, Connection 400V, main motor 35kW, weight approx. 1750kg, good used condition, fully functional
- Bread slicer bread gate - Manufacturer: Treif Maschinenbau GmbH - Model: Delfin - Year of construction: 2005 - Operating voltage: 230 volts - Rated current of the machine: 2.5 - Nominal power: 0.9 kW - Weight: 175 kg
Filling machine Vemag Robot 500, Oil change vacuum pump made, without twisting gear, Connection 400V, 6.5kW, dimensions LxWxH approx. 85x60x145cm, weight approx. 410kg, used, older device, but in very good condition, fully functional
Key data: 630 mm, 200 mm, 4 kW
gebr. Combined planing machine ALDINGER Type: U63 Built in 1957 Motor power: 4kW Drive via V-belts 2-Knife Shaft Strip Knife Max. planing width: 630 mm Max. planing height: 200 mm Table height adjustment by handwheel 2 feed speeds: 8 / 16 m/min. Table lengths: Dressing length: 200 cm Length thicknesses:110 cm Link feed roller Articulated pressure beams Pull-out roller steel 2 tabletop sliding rollers Adjustment of the dressing fence conveniently by handwheel incl. Gebr. Planer Knife Suction device: 160 mm Weight: approx. 1,200 kg Transport dimensions: LxWxH: 212 x 112 x 110 cm
Equipment: 1 pliers feed right 4 Carriage Units Working Range: Wire thickness range: 0.5 - 2.0 mm Band width: up to 10.0 mm Length of move; up to 100 mm Output: up to 300 rpm
Bread slicer Treif Varius 400 Bj: 2017 - Manufacturer: Treif Maschinenbau GmbH - Model: Varius 400 - Cutting width adjustable from 4mm to 14mm - Bread halving function for halving loaves of bread - for breads up to 40cm in length - Sickle knife Technical data: - 400 volts - 1.22 kW - Weight: 150kg - Year of construction: 2017 - External dimensions: 90x73.5x112cm WxDxH
L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle ...
A used Rego Herlitzius Kobold Bread Gate 9mm is currently for sale and immediately available in stock. Rego Herlizius Kobold 9mm Bread Slicer Bread Gate - Creel machine - on castors - with lubrication - Cutting width 9mm - for max. 42cm loaves of bread Technical data: - Manufacturer: HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61cm Depth: approx. 68cm Height: approx. 120cm
Key data: 2000 KW, 2500 kVA, 10500 V
2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number
CONTROLS CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS number of spindles: 2 number of turrets: 1 WORKING RANGE TURNING turning diameter (max): 658 mm bar diameter (max): 80 mm worpiece length max.: 1519 mm MAIN SPINDLE spindle revolutions (max): 4000 /min drive power: 30 kW c-axis: yes COUNTER SPINDLE spindle revolutions (max): 4000 /min drive power: 26 kW c-axis: yes X/Z SLIDE Z-axis travel: 1585 mm X-axis travel: 615 mm Y-axis travel: 250 mm rotating range B-axis up to: 210 ° rapid traverse Z: 50000 mm/min rapid traverse X: 50000 mm/min rapid traverse Y: 40000 mm/min X/Z SLIDE rotating range B-axis up to: 0.0001 ° - rotat ...
Equipment: 1 Carriage Feed Right 1 eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Working Range: Wire thickness range: up to 6.0 mm Strip width: up to 80 mm Feed length: up to 250 mm Power: 10 - 250 rpm
CONTROLS CNC controls MAZATROL MATRIX 2 BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes WORKING RANGE TURNING swing diameter (max): 370 mm turning diameter (max): 344 mm MAIN SPINDLE spindle revolutions (max): 5000 /min drive power: 22 kW COUNTER SPINDLE spindle revolutions (max): 5000 /min drive power: 22 kW X/Z SLIDE Z-axis travel: 760 mm X-axis travel: 207 mm Y-axis travel: 100 mm - rotation speeds (max): 6000 /min X/Z SLIDE Z-axis travel: 815 mm X-axis travel: 141 mm Y-axis travel: 70 mm ATTACHMENTS (TURNING) chip conveyor: yes European CE standards: yes • Robot interface• Automatic door• Tool setter on the ...
Equipment: 1 piece BIHLER noise protection cabin 1 piece pliers feed right 1 piece eccentric press 70 kN 4 Norma sled units 1 piece narrow sled unit Working Range: Wire thickness range: 0.5 - 3.5 mm Strap width: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm
The machine is in perfect technical condition. Availability : immediately
PND CB8 automatic coring and wedging line for Apples Consisting of tank for apple collecting, automatic feeder, cutting station and waste conveyor Capacity 100-120 fruits / min 60-110mm size Machine dimensions 4450mm x 2100mm x 2530mm Power - 4.74 kw Air - 5 bar Consumption 90 NL / Min Wedges 6,8,10,12,14,16
Item condition: in working order, well maintained Availability: immediately
De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.
Item condition: in working order Availability: immediately Location: Lower Saxony Current type: 3-N-PE Frequency: 50 Hz Operating voltage: 400 V
CONTROLS CNC controls MAZAK SMOOTH G BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes WORKING RANGE TURNING swing diameter (max): 370 mm turning diameter (max): 344 mm bar diameter (max): 80 mm MAIN SPINDLE spindle revolutions (max): 4000 /min drive power: 26 kW spindle positioning: 0.0001 ° c-axis: yes COUNTER SPINDLE spindle revolutions (max): 5000 /min drive power: 22 kW spindle positioning: 0.0001 ° c-axis: yes X/Z SLIDE Z-axis travel: 760 mm X-axis travel: 207 mm Y-axis travel: 100 mm number of tool positions (total): 12 number of live positions: 12 - rotation speeds (max): 6000 /min &nbs ...
Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.
Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.
For aluminium tubes (double seam, triple seam) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube feeding magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 heated hopper with electric heating, 1 single-walled hopper 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor control Connection 400V/50Hz Without transfer belt to the cartoning machine Has worked in lin ...
Type: Robby Serial number: 1390303 Year of construction: 2022 Pump capacity: max 2300 kg/hr Hopper: 105 litre Vacuum pump: Busch 16 m³/h Power: 3 x 400V, 50Hz, 5kW Dimensions: 900 x 1200 x 1950 mm Weight: 425 kg Filling, portioning and linking Including 859 linker and DHV937 casing holder Only 52 running hours!
Stitching, folding and cutting machine, Theisen Bonitz TB Sprint 808 08, machine number: 303QS2198, year of manufacture: 1998, 2 Hohner stitching heads, front cut, in good condition, available now
Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic
WORKING AREA 3200 x 2100 mm, X and Z axis 200 mm SPEED X and Y AXIS 70 m/min, Z axis 20 m/min ISAC ITALIA CONTROL 21.5-INCH TFT COLOR SCREEN GRID-ENABLED CONTROL WITH ETHERNET AND USB CONNECTION - 9 kW ISO 30 COPDLE - 9-SPINDLE DRILLING UNIT - LAUNCH MANAGEMENT DRILL - 8-POSITION TOOL CHANGE - 2 vacuum pumps (250 m3/h) - 6 vacuum zones - Loading and lifting unit - Final cleaning unit for slabs - Conveyor belt unit for unloading workpieces - Alpha CAM CAD/CAM software - Alpha Software Cam xNesting - Security barriers to protect against unauthorized access
Used automatic sausage portioning and twisting (joining) machine, Vemag type LPG 208. New: 2011. Automatic sausage portioning and twisting (joining) machine, used in meat processing, which precisely twists sausages of various calibres to specific lengths, working with natural, collagen and cellulose casings, achieving very high performance (even over 2000 portions per minute). 400/460 V, 3 Ph, 50/60 Hz, 9 A, 6 kW. Dimensions: 1500 mm x 850 mm x 1300 mm.
Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg
Used W&P bread roll line, type: MULTIMATIC MUC-5 with Super B Compact - Head machine / dough divider Multimatic MUC-5 - 5 rows - Up to 95g dough weight per dough piece - Proofer Super B Compact - for emperor and sliced rolls - with side discharge - The system was in operation until the end Visits and test runs are possible by arrangement.
Key data: 70 KW, 63 kVA, 400 V
HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315
General Manufacturer: Monnier & Zahner Type: M651 Year of Make: 2007 Control: Fanuc Series 21i MB Travels: X 80 mm, Z 250 mm, A swivel axis +/-45°, W 250 mm Other axes: C-axis workpiece spindle, V-axis loader Working spindle Speed: 3,000 rpm Dimensions and weight Dimensions: 2,400 mm x 1,410 mm x 2,250 mm Weight: approx. 2,400 kg Condition Condition: Used Functional: Tested and fully functional
T type milling machine TIGER TMT 5 RT - CNC SELCA 4045 - head type T30 Index 2,5°, Rotary table capacity 6.000 kg, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1550x1300 mm, Maximum table load: 6.000 Kg, Cross travel x axis: 2000 mm, Vertical travel y axis: 1550 mm, Longitudinal travel w axis: 1050 mm, Working feed x-y-w axes: 0 - 60.000 mm/1, Rapid feed x-y-w axes: 12.000 mm/1, Spindle taper: 50-DIN69871, Spindle speed: 0 - 3000 rpm, Number of spindle speeds: 2, Cnc: SELCA 4045, Weight: 15.000 Kg
: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roll-off container TECHNICAL DATA: External dimensions: 7.28 x 2.46 x H 2.44 m Interior dimensions: 6.94 x 2.31 x H 2.19 m Suitable for garbage collection
This machine is ideal for use in bakeries, restaurants, or grocery stores. It impresses with its robust construction, ease of use, and consistent slicing quality.
Oil-Pressure Piston Filling Machine Cylinder Volume: 20 L Stainless Steel Cylinder, Piston, Housing, and Lid Swivel Lid Power Rating: 750 Watts Three-Phase Current 400 Volts, 50 Hz
Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece ...
Laminator Triplex solventbased Min. material thickness 12 my , Max. material thickness 120 my, Cylinder width 1300 mm, Material width = 1250 mm, Unwinder and rewinder (turnstile) Roll diameter max 1000 mm, Sleeve 152 mm, Speed (mech.) = 350 m/min
Sharpening range: up to 500 N/mm² 22 - 7.0 mm up to 1,000 N/mm² 21 - 8.0 mm over 1,000 N/mm² 20 - 8.0 mm Number of calibers: 10
Porter Lancastrian 5BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Single Skin Stainless Steel 1.5" RJTF Both Top and Bottom Ports Side Manway 2 x Sight Glasses 3 x Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
CONTROLS CNC controls FANUC 160 I BASIC FUNCTIONS number of spindles: 2 number of c-axes: 2 WORKING RANGE TURNING swing diameter (max): 42 mm turning diameter (max): 42 mm bar diameter (max): 42 mm MAIN SPINDLE spindle revolutions (max): 6500 /min COUNTER SPINDLE spindle revolutions (max): 6500 /min X/Z SLIDE X-axis travel: 65 mm Y-axis travel: 350 mm rapid traverse Z: 30000 mm/min rapid traverse X: 30000 mm/min rapid traverse Y: 30000 mm/min X/Z SLIDE Z-axis travel: 320 mm X-axis travel: 265 mm Y-axis travel: 326 mm rapid traverse Y: 30000 mm/min ELECTRICAL SPECIFICATIONS mains power supply: 54 kVA mains voltage: 400 V mains frequency: 50 Hz DIMENS ...
1000L Vessel Horizontal stainless steel Manufacture: Mueller (NL) Year of Manufacture: 2013 Diameter Approx 1000mm Height Approx 1100mm (including motor) Length Approx 2400mm Stainless Steel Single Skin Bottom Outlet DIN Butterfly Valve Working Pressure 3bar Pressure Gauge Stainless Steel Cradle/Frame with Four Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Cold storage tank 150HL Vertical cylindrical stainless steel vessel. Located out doors with external cladding and insulation finished in riveted stainless steel . Fitted with cooling jackets. Mounted on 4 stainless steel legs with adjustable feet Approx dimensions : Overall height 5000mm Overall diameter 2000mm Legs 800mm Capacity 150HL Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
This sterile tank manufactured by KHS is designed for the safe intermediate storage of beverages in aseptic production processes. The tank originates from an industrial beverage processing line and meets high hygienic and technical standards required in the food and beverage industry. Technical Specifications: Manufacturer: KHS Type: Aseptic Buffer Tank Year of Manufacture: 2007 Storage Medium: Beverages Capacity: approx. 18,000 liters Max pressure: 7 bar Minimum pressure: -1 bar Overpressure: 10.5 bar Temperature range: 20-130 degrees centigrade Material in touch with product: stainless steel 306 Design: Aseptic, food-grade, high-acid compatible Key Features & Benefits: Suitable for aseptic beverage processing High product safety and hygiene standards Robust and durable industrial design Ideal as a buffer or intermediate tank in filling and processing line ...
Key data: 230 mm, 460 mm, 25 U/min
Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...
A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless ...
Transnorm Rising falling Incline with arch and forerun belt conveyor 1000+10700+1000-600-500 RA2459 Technical data: Conveyor length (NL): 12700 mm (1000 mm forerun + 10700 mm incline + 1000 mm arch ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12700 ( 1000 + 10700 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...
maximum number of results exceeded
please refine your search
