flexo and rotogravure used for sale

Specifications: Weight approx. 3 to Drive power 8.5 kW Height approx. 2.1 m Width x depth approx. 2 x 0.8 m Perforated punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm Flat steel shears : 500 x 18 mm Notching device with rectangular tool up to 13 mm Sectional steel shears, L-steel, 90° mm

Rego Roto Shop DL Circular Knife Machine Stainless steel version, mobile Knives newly sharpened and coated Manual operation via rotary control Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread shaft: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Cleaning machine with 6 months warranty More bread slicers in stock!

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Comexi solvent-free laminating system Coating width = 1320 mm , Speed = 350 m/min, With 2 unwinders (turnstile) With 1 rewinder (turnstile) With Doypag vario mixer. Mixing plant 4 heaters Pre-treatment AFS corona type. G 60 S,

Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

We are selling here a roasting pan from the manufacturer MBM, type GFT90LC in a good used and functional condition. The device is gas operated, 16 kW, completely stainless steel, sides individually adjustable, workshop tested, ready for immediate use, dimensions W/D/H 90/90/95 cm, others on request.

Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

Key data: 15 t, 66 mm

Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die

Bowl cutter Meissner Type: RSM 325 Condition: Need renovation/used

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

Key data: 1558 KW, 2300 kVA, 400 V

Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.

Used vertical multi-row machine for filling loose products (instant coffee, etc.) into stick sachets by Triapex model HNXB6. New 2007. Machine description: - 6-row machine (forms 6 sticks simultaneously). - machine equipped with tubes with a diameter of 25mm - forms sachets with a width of 40mm (possibility to order tubes with diameters from 10 to 50mm from the producer) - adjustment of sachet length from 30 to 180mm - output of 30 cycles per minute (for sachet length 150mm); 30 cycles x 6 = 180 sticks per minute - screw dispensers with servo motors - regulation of the amount of dispensed product by changing the speed of the screw - film reel parameters: maximum reel diameter 600mm (the reels used by us have a diameter of 450mm); inner diameter of the reel (thimble) is 76mm - power supply parameters: input power 4.5kVA, 3 x 400V, 50Hz; air pressure 0.5 - 0.8MPa, maximum air con ...

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)

HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Multi-spindle drilling machine from Bernhard Steinel - Machine Tool Factory Schwenningen/Neckar ran reliably until the end The machine is equipped with a foot pressure switch from Festo a drive motor from Bauknecht and a control box from Siemens Pneumatic lines should be checked/repaired before The machine can be viewed at any time. Transport via freight forwarder can be arranged at short notice -feel free to take a look at the other advertisements or visit us directly at Gerstenstraße 2, 17034 NB The price is net plus 19% VAT If you have any further questions, please call or write. Maschinenhandel Nord new & used machines for industry, trade and commerce

Groninger production line for RTU nested syringes comprising MWU 010 semi-automatic opening system for outer bags of sterile tubs, MWF 100 fully automatic machine for the removal of cover foils and the fabric inserts of sterile tubs and DFVN 5000 filling & closing machine (CIP/SIP-system, filling system RKP with re-circulation suitable for suspensions, etc.), capacity up to 9,000 objects per hour Including format parts to handle the following syringes: 0.5ml / D=6.85mm 1ml long / D=8.15mm 1ml short / D=10.85mm 2.25ml / D=10.85mm 5ml / D=14.45mm 10ml / D=17.05mm 50ml / D=31.5mm

Inquiry number 390223 Machine Type Kieserling Four Hammers Sharpening Machine Working range round fishing: from Ø 15 mm to Ø 115 mm / folding fishing: from Ø 20 mm to Ø 120 mm Flow direction: Automatic loading at the front Speed up to 100 mm/sec Make Kieserling / Type AVS 63 Year of construction 1981 Overhaul in 2024 Location NRW Length approx. 2,500 mm Width approx. 930 mm Height approx. 1980 mm Weight approx. 5,280 KG Country of origin: Germany Delivery time by arrangement Delivery terms ex works

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction: Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35 Year of construction Refurbished in 2023 Location: Solingen Weight approx. 2,000 kg with substructure and drives Country of origin: Germany Delivery terms ex works

Machine type: Kieserling VRM 20 Flow Direction: Right to Left Target speed with 3-speed manual transmission, m/min 37.5 / 50 / 75 Main operation 1.5KW Make Kieserling, type VRM 20 Location: Solingen NRW Length 2,200 mm Width 500 mm Height 1,700 mm Weight approx. 600Kg Country of origin: Germany Delivery condition Ex-works Solingen, free loaded truck

Machine Type: Kieserling Nine-Roll Straightening Machine Working range rods Ø 5 mm to Ø 30 mm Flow direction: from right to left Speed approx. 40 m/min Made by Kieserling & Albrecht, type WRUW 1 Length 2,060 mm Width 1,450 mm Height 1,500 mm Weight 3,700 kg Country of origin: Germany Delivery time by arrangement Other: The machine is currently being completely overhauled by our specialist company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Machine Type: Kieserling Six Roll Straightening Machine Working range from Ø 18 mm to Ø 100 mm Flow direction: from left to right Speed 37.5 / 50 / 75 m/min. Make Kieserling, type VRM 75 Location Solingen Length 1,970 mm Width 980 mm Height 1,900 mm Weight approx. 3,900 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is completely overhauled by our specialist company.

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 3 to Ø 20 mm Flow Direction Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 000 Weight approx. 800 kg Country of origin: Germany Delivery time approx. 8 weeks

Type of machine Bültmann Straightener Working range tubes: 10 - 60 mm Speed 10 - 120 m/min Make Bültmann , Type PRM 60/060 Location: Germany Working height approx. 1,500 mm Country of origin: Germany

Machine Type: Kieserling Six-Roll Straightening Machine Working range Ø 6 to Ø 60 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 60 Weight approx. 3,800 kg Country of origin: Germany Delivery time approx. 12 weeks

Pester PEWO-pack 450 stretchwrapper for folding cartons, etc., including PEWO-therm shrink tunnel and PEWO-collect packing table, carton infeed with turning device and stacker, film splicing unit, format range cartons min. 30 x 30 x 60 mm (LxWxH), max. 100 x 100 x 250 mm (LxWxH), format range collation/bundle min. 30 x 30 x 60 mm (LxWxH), max. 300 x 380 x 250 mm (LxWxH), capacity up to 50 bundles per minute, electrics 3x400V+N+PE/50Hz, power consumption 13.1 kW, operating pressure 5 bar, infeed height 840 +/-10 mm, outfeed height approx. 800-950 mm, machine floor space approx. 4000 x 2513 mm (LxW), machine height approx. 2100 mm

Machine Type: Kieserling Six Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35/45 Location Solingen Weight approx. 2,800 kg Country of origin: Germany Delivery time approx. 12 weeks Delivery condition ex works Other: Important: the machine is currently being overhauled by our company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Machine Type: Kieserling Nine-Roll Straightening Machine Working range tubes and rods Ø 5 mm to Ø 30 mm Flow direction from right to left Speed 40 m/min Make Kieserling, type WRUW 1 Location Solingen Length 1,600 mm Width 1,400 mm Height 1,600 mm Weight 3,700 kg Country of origin: Germany Delivery time approx. 4 weeks Other: The scope of supply of the machine includes the complete finishing for loading and removing the straightening material, consisting of: pre-bearing with roll-off slope, infeed channel with pusher, discharge channel with ejector, roll-off slope, collection belt trough.

Machine Type: Kieserling Seven-Roll Straightening Machine Working range tubes from Ø 15 mm to Ø 75 mm, rods Ø 20 mm to Ø 65 mm Flow direction from right to left Speed approx. 50 m/min Make Kieserling, type WRUN 1A Location Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is currently being completely overhauled by our specialist company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7

Wir bieten ein gebrauchtes Kühlhaus und Gärschrank an. Abholung aus Deutschland. Price 3000 Euro aus Deutschland.

Pre- and post-heating coil, air heating element, DN125, 371550, LHE 125 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Dimplex - 371550 - LHE 125 IS Air heating element Electric pre- and post-heating. 0.75 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +30°C, air flow monitor for detecting the smallest air flows at minimum operation and two safety temp ...

Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...

Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER

Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100

Flat and satchel bag machine Matador 20, Windmoeller & Hoelscher, Tube width 9-20 cm, Tube length 10-32 cm, machine ready for test production

Vacuum filler Manufacturer: Handtmann Model: VF 612 Portioning range: 5 – 100,000 g Efficiency: up to 600 portions per minute and 3000kg/h Filling pressure: 35 bar Hopper capacity: 240l Power: 4.5kW Electric: 400V, 3ph, 50Hz Dimensions:215x160x225cm Weight: 500kg

Key data: 790 KW, 738 kVA, 400 V

Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513

Vacuum filler with accessories Manufacturer: Handtmann Model: VF 616 + AL 216 - 21 Dimensions: 215x160x225cm/150x70x130cm Electric power: 6 + 2.5kW Volume: 350 liters Capacity: 3.600kg/h

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Cutter Seydelmann K 60 U, Machine completely made of stainless steel, 2 speeds, mixing gears, cutter head wrenches, external control box and display, built in 1996, Dimensions LxWxH approx. 160x110x120cm, weight approx. 888kg, good used condition, fully functional, runs smoothly

Dry air dryer Granulate dryer for drying and heating hygroscopic granules. Capacity 600 l. Heating capacity 4.5 kW. Optionally available with dehumidifier AZO LE 600 P.

20-75- CNC router WOODLAND MACHINERY (new) Type SX1325A-4 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 6kw+4.5kw x 3 18000 rpm. Engine Hybrid servo Control system LNC system Repeat positioning accuracy 0.03mm Work table vacuum plate Vacuum pump 11kw Maximum speed 50000 mm/min Maximum working speed 25000mm/min Resolution ±0.05 mm System resolution ±0.001 mm Code G Inverter 7.5 kw Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 2100 kg The price is 23100 Eur

Bausch + Stroebel KSF 2020 monoblock filler and screw capper, 2 filling heads with a dosing range from 0.1 to 100 ml. with the appropriate pumps, first closing station for droppers/bungs, etc., second closing station for screw caps, size range container diameter 16-55mm, height max. 135 mm, includes format parts for threaded vials GW2.5, GW5, GW10, GW15, GW25 & GW50, output up to 6,000 vials per hour, including infeed and outfeed tables

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Key data: 650 mm, 1300 mm, 1 U/min

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

Banding machine with special dimensions. Frame size: 640 mm wide and 350 mm high. Belt width used 30 ( 28 ) mm. Due to the special belt guide, the insert is extremely thinner materials possible. Foil up to approx. 40 μm descending, paper up to approx. 70 g/m² . Compressed air is required for operation.