137,836 used machines on RESALE, but how to find them? Machine Search
Seydelmann K 60 DC-6, 60 litre cutter with ejector, largely solid rust-free, operation via toggle lever switch, separate digital display in stainless protective housing, separate stainless control cabinet, noise protection cover made of transparent special plastic, central lubrication point for knife shaft, balanced, exchangeable knife head, 6 infinitely programmable knife speeds up to 5,000 rpm, 2 bowl speeds, 6-knife head
Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel
7-axis turning and milling center Manufacturer: OKUMA Type: MacTurn 50 Year of Make: 2001 Control: OSP-U100L Spiral Circle Interpolation HS ATC Upper Turret: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm. C = 360/0.001 B = 360/1 indexed Turning diameter max.: 610 mm Turning length Z1 min.: 1,500 mm Swing diameter: 610 mm Turning diameter over face slide: 580 mm Center width approx.: 2,000 mm Recordings: BT50 Driven WZ BT50 = 40- 3000 rpm Magazine ATC 72 BT50 To turn: ≈ 36 Powered WZ: ≈ 36 Lower turret V8: X2 = 200 mm Z2 = 1,045 mm Turning diameter max.: 380 mm Turning length Z2 = 1,045 mm Swing diameter = 380 mm Mounts: VDI40 Turret: 8 places VDI40 Spindle: Speed range: 14 - 2800rpm at 37kW Lining: D400mm Spindle Passage: 110mm Spindle Nose: A2-11 Torque approx.: 2,000 Nm Coolant system with IK 40bar New screen New ...
Cutter Laska model KU 65 AC, bowl capacity 65 liters, microprocessor control, probe plate with membrane keypad and plain text display, infinitely adjustable knife shaft 35-4,900 rpm, two bowl speeds, mixing gear backwards infinitely variable, electric knife shaft brake, 6-knife head, 3-knife head optionally available for an extra charge, engine power 23 kW, operating voltage 3 x 400 VAC / 50 Hz
Max. workpiece height 100mm Max. workpiece width 1000mm Min. workpiece width 500mm Top unit 6 brushes Top/bottom adjustable unit Helicopter rotating system 2 types of brush rotation speeds Smooth adjustment of belt feed speed Belt feed 1.5kW 4kW motor Diameter of the exhaust port 180mm, 200mm
Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long
Capacity: 2 x 2.70 m. 3 x vertical pushers 2 x horizontal pushers Pneumatic Mobile
Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL
Capacity: 3000 x 1900 m. 4 x horizontal presses 2 x vertical pressure beams Hydraulic pump with 3 kW motor
Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units
Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL
Motor: 5.5 kW Speed: 2980 rpm Input diameter: 25 cm Output dimensions: 30 x 20 cm With mounting bracket With control box
Auction-ID: A1-50256-1345
1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005
I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.
Auction-ID: A1-50256-1440
Make : Hassia Model : THL 24/28 Stations : Plastic Roll insert— Pre Heat —Forming to Cups —Filling — Sealing — Cutting in Pieces — Robot pick and place — Wrap Around Carton Packer Volume : 10gr -20gr Product : Margarine/Butter Capacity : 37,000 pieces per hour Circles per Min.: 25 Y.O.M : 1986 S.N : 1021800287 Electric : 220 ~ 3 / 50hz / A: 65 Weight : 5000kg Dimensions : 5500 x 800 x 1700 Air : 6 Bar
Auction-ID: A1-50256-1341
Auction-ID: A1-50256-1349
Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 620 mm table width: 170 mm table load: t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-50256-1439
Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1
- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.
- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.
Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996
- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.
Auction-ID: A1-50256-1351
Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm
REF-2034 RISCO CONTINUOUS VACUUM SAUSAGE STUFFER Continuous vacuum sausage filling machine Manufacturer: RISCO Model: RS-4003-320SC Year: 1998 Power: 4.5kW Voltage: 400V. 50Hz. Three-phase Weight: 560kg Overall dimensions: 1,000mm width, 800mm length, 1,970mm height
TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...
Auction-ID: A1-50256-1448
Auction-ID: A1-50256-1342
Auction-ID: A1-50256-1352
I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.
Auction-ID: A1-50256-1338
maximum number of results exceeded
please refine your search
10 € 
