129,270 used machines on RESALE, but how to find them? Machine Search
Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...
Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is ...
trolley -Simple bucket -Flat press -2x shelves for microfiber mops
Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...
chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis from electric forklift EVS 25/14 -Wheels: Ø 275 x 100 mm double tires -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 860/360/H425mm -Total weight: 206 kg
Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units
used
Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes
Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...
Panaroma Model: AT400 Pasta stacking and cutting machine Serial: 1229 2002, Stainless stacking and cutting machine, 400mm width, designed to roll, to dust, to cut and to overcome the pasta sheet layers, suitable for lasagne or tagliatelle. Output up to 100Kg / hour, variable speed, with timer, 3ph, mobile
20,000 liters tank with thermal insulation not used tanks
Hand spindle press, mandrel press, spindle press, hand spindle press, rotary mandrel press, rack and pinion press, workshop press -Ardent press. Rack and pinion press, heavy-duty design -Protrusion: 210 mm -Height: min. 35 mm / max. 350 mm -Dimensions: 435/230/H550 mm -Weight: 51 kg
Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Gumasol, Softy solid rubber tire with rim and sprocket -Type: GLE 4.00-4 -Hub: Ø 228 mm -Tooth ring: Ø 20 mm / 55 teeth -Submission/Price: complete -Dimensions: Ø 300 x 245 mm -Weight: 22.7 kg/pc.
Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.
Werner & Pfleiderer Multimatic Head Machine 4-row used immediately available in the warehouse. Type: Multimatic 4-row Stand machine the machine is in the baker's condition Built in 1993 380 Volt
Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis
Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003
Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)
Bread slicer Wabäma Type Piccolo 380.10 HA MB Cutting width 10mm semi-automatic 230 Volt 0.75 kW
Automatic Cutting width 9mm 192 kg 1.1 kW 400 Volt - 50 Hz
Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 95 mm -Max. bore diameter: 115 mm -Suitcase -Dimensions: 400/170/H140 mm -Weight: 12 kg
Very good machine with spare parts worth 3000,00â?¬.
Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls
1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 100 mm -Max. bore diameter: 120 mm -Suitcase -Dimensions: 350/170/H135 mm -Weight: 12 kg
1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder
Crusher and shredder for broken asphalt; Motor 75 kW with hydraulic feeder in the hopper. Milling shaft. Power 75 t/h For granulating asphalt break-up. Up to 1200 x 400 mm. Granules depending on the built-in screen size.
Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit
Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.
used
Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg
-Circular knife bread cutting machine -Cutting width 400mm -Note thickness adjustable -Built in 2015
Conditie: Gebruikt Voorraad nummer: 2397P Type: CCS904 serienummer 7096 Bouwjaar: 2007 capaciteit: 2000 RPM Plakdikte: 0,5 - 50 mm Perslucht: 10 bar, 150 l/min. Power: 3 x 400V, 50Hz, 10 kW Afmetingen : 13400 x 1900 x 2600 mm Pago labelprinter type Systeem 516 Pago-etiketteermachine Serienummer 212516068 Pago-etiketteermachine Bouwjaar 2012 Mettler Toledo metaaldetector en controleweger type XS3 Mettler Toledo metaaldetector en controleweger Serienummer 35000430 Mettler Toledo metaaldetector en controleweger Bouwjaar 2008 Bosch Sigpack Systems robot-/kartonlijn Type: LDM + TTLi Bosch Sigpack Systems robot / kartonneerlijn Serienummer: J-01659-LDM-042 / J-01659-TTLi-077 Viewtech optische besturing Type: VT2007/010 Viewtech optische besturing Serienummer: VT2007-DCDCL/057 Inclusief CCW904-weegschaal, CCR904-schommelmechanisme, CCA-snellader en CCU-portie-eenheid. Met af ...
Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible
Includes: control unit, lubrication pump. Auction-ID: A1-41275-186
Equipped with Haffner pass-through device Auction-ID: A1-41275-41
2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.
No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)
NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph
maximum number of results exceeded
please refine your search
10 € 
