flexible used for sale

x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...

Engine with flexible shaft make SUHNER type Rotar DKM 6Mash. -No: 1023406 spindle speeds: 1000 - 13500 rpm.Drive power: 2.4 kWWith- flexible shaft 3.0 m with collet chucks 6.0 mm- mobile with underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

Engine with flexible shaft make SUHNER type Rotofero DKM4Mash. -No: 2409677 speeds: 850 - 12000 rpm.Drive power: 0.73 kWPower connection: 380 V / 50 HzWith- fixed base- flexible shaft 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motor with 2 flexible shafts make BIAX type MBPMash. -No: 8/1113/39Engine speed: 900/2200 /: 4600/9000 rpm.Drive power: 0.55 kWWith- 2 flexible waves- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

NOE Alu L A lightweight system that can be used to work independently of the crane. The NOEalu L convinces as a real hand formwork, due to its low weight, high flexibility and durability. The low weight of 21 kg/m² Ensures long-term productive Work, even without a crane. The sturdy construction will meet the to cope with the stresses of everyday construction site life. Flexible thanks to a wide, Vertical or horizontal table assortment. The Alulock connects the various components of the system as reliable as it is escaped. The individual panels allow a concrete pressure of up to up to 60 kN /m². NOE Alu L A lightweight system, for work without crane. The NOEalu L convinces as an Hand formwork, due to low weight, high flexibility and durability at the same time. The low weight of 21 kg/m² ensures a permanently productive work, even without a crane ...

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + V 30 AC-DC - Collaborative TIG welding - Welding machine: V30 AC-DC Cobot - Optional: digitally fully integrated cold wire feed EASY PROGRAMMING With the free-drive function, welders show the cobot where it should weld by hand – including intermediate waypoints and sections. Operators can then perform the tasks precisely with the help of the robot. The optional multifunction flange also allows programming directly on the 6th robot joint to avoid unnecessary walking distances. SECURE AND FLEXIBLE The safety concept consisting of laser and function probe ensures that the operator is not within the radius of movement of the robot arm ...

I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.

Straight from Denmark Dantruck trolley (like Kalmar) Double mast, side overhang, Nicely renovated , functional , ready to work . Drive Type: Diesel Load capacity : 6.000 kg Load centre of gravity : 600 mm Manuf. year 2000 - in use since 2001 Operating hours 11.435 Chassis number Engine/Charger VM HR Wandler Gearbox Technical condition good Optical condition good Length:3.620 mm Width:1.950 mm Unladen weight: 9.680 kg = MAST: Height. Ref.:4.930 mm Height. Frame: 3.370 mm Free Stroke:No Fork carriage 1950 mm, ISO Klasse: ISO Klasse 4 = 5,000 - 10,000 kg Fork length 1.920 mm Pitchfork: LxBxD: 1920mm x 155mmx 50mm TYRES: Front tires Super-flexible Description 8.25-15 Rear tires Super-flexible Description 8.25-15 Twin tires = EQUIPMENT: Side shift, Fork positioner EQUIPMENT ADD. Third valve, Fourth valve, Headlight at the front, Heating, Cabin rei ...

The machine can gently separate meat from waste components, like bones, veins, and skin. It processes fish, deboned turkey drumsticks, chicken backs, legs, wings, tails, necks, and turkey and chicken carcasses. The solid components remain outside the drum. The ratio between yield and quality can be influenced by means of adjusting the pressure roller. A flexible squeezing belt transports a product to the perforated drum, where it is pressed between the belt and drum. The soft components come inside of the drum through the holes. The solid components stay outside. Yield and quality can be adjusted using the pressure roller. Operation process with a flexible squeezing belt feeds the product to a perforated drum and presses the soft components through the holes of the drum. Capacity: up to 3500 kg per hour Voltage: 3 x 400 V Hole diameter: 2 or 5 mm

Thermoformer / heat sealer for product packaging in trays For flexible plastic trays, flexible plastic closure Rebuilt in 2015 With mold for 180 x 125mm trays Includes vacuum pump, and refrigerator DOCUMENTATION AVAILABLE

Hand grinder, flexible shaft, flexible shaft SEW S2198 Speed: 2990 rpm Power consumption: 1650 watts voltage: 380 V / 2.7 A Year of construction: 1975 used, tested ! Tool dimensions 160 x 32x 20 mm

Hand grinder, flexible shaft, flexible shaft SEW S2198 Speed: 2990 rpm Power consumption: 1650 watts voltage: 380 V / 2.7 A Year of construction: 1975 used, tested ! Tool dimensions 160 x 32x 20 mm

Description Multistage fume purifier Ø Delivery: 150 FLEXIBLE HOSE CONNECTION Ø Suction: 100 FLEXIBLE HOSE CONNECTION NOMINAL FLOW RATE Qn 400 m3/h TOTAL PRESSURE Δt = ~ 115 mm H2O INSTALLED POWER Ni = 0.37 Kw

Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: Plymovent, flexible extraction arm type KUA-160/2 -Tube: Ø 160 mm -Hood opening: Ø 300 mm -Length up to: 2500mm -Number: 1x suction arm available -Transport dimensions: 1050/600/H300 mm -Weight: 18 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: KTR, highly flexible flange coupling -Type: BoWex - Elastic 48 HE -Outer diameter: 199 mm -Hole circle: Ø 181 x 7 mm -Number: 2x clutch discs available -Price per piece -Dimensions: Ø 199 x 50 mm -Weight: 0.7 kg/pc.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 10 mm -Dimension:Ø 90 x 70 mm -Weight: 1,8 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bohrung: Ø 10 mm -Dimension: Ø 108 x 95 mm -Weight: 3.5 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: Poly, torsionally flexible claw coupling type PKZ 15/1 -Bore: Ø 15 mm -Dimension: Ø 157 x 130 mm -Weight: 9.6 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Boret: Ø 20 mm -Dimension: Ø 176 x 140 mm -Weight: 12,6 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 27 mm -Dimension: Ø 205 x 160 mm -Weight: 20 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bore: 1x Ø 22 mm / 1x Ø 29 mm -Quantity: 2x coupling available -Price per piece -Dimension: Ø 258 x 200 mm -Weight: 37.4 kg/pc.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 14 mm -Number: 6x coupling available -Price per piece -Dimension: Ø 142 x 120 mm -Weight: 7.4 kg/pc.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 29 mm -Number: 3x coupling available -Price per piece -Dimension: Ø 225 x 180 mm -Weight: 26.4 kg/pc.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, flexible coupling, tire coupling, overrunning coupling -Manufacturer. Stieber, freewheels and backstops -Type: Stieber HD ETK 30 GL Z 08 -Hollow shaft: Ø 30 x 80 mm -Dimension: Ø 120 x 80 mm -Weight: 5.1 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, flexible coupling, tire coupling -Hollow shaft: Ø 35/40 mm -Dimensions: see drawing with the pictures -Dimensions: Ø 205 x 205 mm -Weight: 20.7 kg

Machine Speed : 2500 pots per hour (depending on container specification and product viscosity) Fill Range Main fill, pre-fill and post-fill filling systems 70 to 568cc each Dosing Range : Small dosing 0 to 100cc each Pot Diameter : Maximum 125mm Pot Height : Maximum 125mm Power Supply : 380-415V / 3 Phase / 50-60Hz + Earth + Neutral Air Supply : 6 Bar at 150L/min NovaPak D2500 is a flexible, compact, automatic rotary filling and sealing machine, fully enclosed using minimum floor space. It can cater for various size and shape of container and offers a machine mounted container dispenser unit and location system to accurately control container stacks. A detection system is integrated as standard to offer ‘no-container; no-operation’ facility The machine includes a filling system (manufactured from 316 grade stainless steel) complete with product tank. Interchangeabl ...

We sell here a Zwick Roell tensile and compression testing machine Zwick Roell Z020 TE BT2-FR020TE-A50 with Testcontrol II and TestXpert software. The machine is in a tagless condition and fully functional! More photos will follow! Test force: 20kN Test chamber width: 440mm Height of lower test chamber: 1785mm Modern load frame design • The drive is provided by maintenance-free, digital controlled AC drive technology. In combination with the innovative engine feedback system mdfhl37nql even at the lowest speeds, the best synchronization properties. • The testing machines are equipped with a patented rigid hollow chamber profile with guide cylinder equipped. The large guide length and surface ensure high-precision truss guidance. This combination eliminates undesirable mechanical influences on the sample are minimized. • The T-slots integrated in the profile g ...

Can Filling Line Wild Goose 3000 cph for Various Beverages – 2021 Excellent condition can filling line for beer, cider, cocktails, kombucha, wine and other beverages. The line consist of Zomerdink depalletizer with incorporated can rinser, Wild Goose Evolution 5 series filler-seamer block, Inline Filling Systems roll fed labeller for self adhesive labels and date coding, buffer table, semi-automatic Framax carton box erector-sealer and flexible roller conveyor for full carton boxes. Wild Goose patented seaming and filling technology has five filling time adjusted volumetric filling tubes and one head seamer with two seaming rolls. System has air pre-evacuation with CO2 before filling and after mechanical foam removal, full can tops are flushed with CO2 before placing a lids. After seaming, there is an outside can rinsing system with water. Filling process is fully automatic, contro ...

CELL COMPOSED OF: 2 MULTICONTACT GRINDING UNITS WITH 3 BELTS fully automatic with intelligent system, capable of maintaining the programmed working pressure constant. 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 2 KAWASAKI RS50N ROBOTS each having a wrist capacity of 50 kg. Each robot is complete with: _ANTI-SPARK PROTECTION on the wrist; _TICKET INSPECTOR; _PNEUMATIC SYSTEM.

Cimec Used Isobaric Filling Monoblock 2016 AM S 8 1 VA Introducing the Cimec Used Isobaric Filling Monoblock 2016 AM S 8 1 VA a versatile and efficient machine designed for filling and capping glass bottles with aluminum screw caps This monoblock system offers seamless integration of filling and capping processes ensuring a streamlined production line for your beverage packaging needs Convenient CIP Preparation Equipped with dummy bottles and flexible tubes this machine allows easy connection to the central manifold facilitating convenient and efficient CIP Clean in Place preparation Flexible Bottle Equipment With a bottle equipment range of 82mm and 56mm diameters this machine can accommodate various bottle sizes upon request Compatible Cap Format The cap format supported by this machine is the popular aluminum screw cap specifically the 28x18mm size Reliable Performance Rest assured th ...

Used compressor Siad Tempo 2004 Full maintenance in early 2022 2000 working hours of autonomy until the next routine maintenance deadline for this Siad HP compressor 1500 HP compressor OIL FREE AIR COMPRESSION UNIT with a capacity of 1500 m h having the following main working data gas to be compressed air electric feeding 380 V 5 50 Hz Suction conditions altitude 500 m s l m temperature min max internal 10 35 C temperature min max external 5 45 C relative humidity 50 wet bulb 26 C Delivery Conditions max pressure 42 bar output at suction conditions 1500 m h pneumatic part working dry rotation speed 750 rpm average piston speed 3 75 m sec electric motor 4 poles installed power 315 kW shaft power 270 kW electric motor execution IP 23 coupling V belts cooling water T inlet outlet water 10 C approx approx water requirement 27 m h Structural features of the Used compressor Siad The pneumatic  ...

Year 2011. (Not exploited) Types of packaging: • Flexible packaging • Semi-rigid packaging • Tight packaging Medium to high performance. • Ability to use various materials, such as flexible film, PS, PETS, PVC, HIPS, etc. • Maximum cycle speed of 18 cycles per minute for soft blister packaging and 10 cycles per minute for rigid blister packaging • Web width 400 mm • Cut length up to 320 mm • Depth molding 80 mm • Servo chain • Stainless steel construction.

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

- Film and carton packaging printing with quick-drying ink at high production speeds - Prints on a variety of solid and flexible surfaces - CoLOS Create, CoLOS Control and CoLOS Enterprise software packages for network control of printers and print image creation - easy on and off - Packaging material without interruption of production - Printing speed up to 208 m/min - Pressure height up to 25.4 mm - Print length up to 35.6 cm - Deposit of up to 50 captions with up to 8 lines - Barcodes: Interleaved two of five , Code 39, Code 128,EAN-13, UPC-A - Sensors for detection of cardboard packaging, connection and extension cables (standard) - LCD graphics display with backlight (standard)

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Approx. 30 lfm shelf shepherd, type R 3000 Over 300 meters present as good as new, 50 cm depth present Negotiation price: € 2,330.00 net Offer consists of: Approx. 30 lfm shelf, 2.3 m high, 50 cm deep, 100 kg load/compartment. Field width approx.100 cm 31 pcs stand or frame, 2.3 m , galvanized 150 pcs. shelves, 100kg load/compartment, galvanized 7 St. Cross Associations for Stiffening. 5 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Shipping/transport costs on request Visit possible at any time by appointment. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ong ...

Hydrostatic pressure transmitter with metallic measuring cell Manufacturer: Vega Grißhaber KG Type: D36G 0.2 EXB Continuous level measurement by means of a hydrostatic Pressure transmitter with metallic measuring cell in compact design with Threaded connection, flexible cable extension as well as one in the sensor housing built-in two-wire electronics with analog signal transmission 4 ... 20 mA/HART suitable for a separate evaluation device e.g. type VEGAMET 381 Ex. Scope The pressure transducer is a pressure transmitter for pressure and level measurements of liquids and viscous fillers with higher temperatures in the chemical, food and pharmaceutical industries. The pressure transducer offers the possibility to detect even the smallest measuring ranges from 0.1 bar. Your benefits - Highest measurement reliability even at rapidly changing process temperatures - High ...

Steel box feeder with steel belt and combined drive unit for belt and windlass. Box dimensions: Ca. 2.000 mm x 750 mm x 500 mm high; incl. hopper on top with the following inlet dimensions: 1.600 mm x 1.200 mm x 360 mm high. Condition: Solid body; motor must be revised, part of belt needs to be greased / made flexible (due to standing time)

Approx. 30lfm shelf system shepherd R3000 Manufacturer: Schäfer R3000 2014, as new, see pictures. Stand, galvanized, 2.5 m height, depth 60 cm Shelves, galvanized, 200 kg load/compartment, field width approx. 100 cm Negotiation price: € 2,230.00 net from stock Offer consists of: 31 pcs stand or frame, 2.5 m, galvanized 90 pcs trays, 200 kg load/compartment, galvanized 10 St. Cross Associations for Stiffening 3 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Goods are in stock. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. More information on request. (changes and errors in the technical  ...

Approx. 30 lfm shelf shepherd R3000 Manufacturer: Schäfer R3000 as new, see pictures. more than 300 meters present Stand, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load/compartment, field width approx. 100 cm Negotiation price: € 1,630.00 net from stock Offer consists of: 31 pcs stand or frame, 2.5 m, galvanized 90 pcs trays, 100 kg load/compartment, galvanized 10 St. Cross Associations for Stiffening. 3 levels per field (of course several are possible at an extra cost)Other compositions are possible. Heights 2.3m, 2.5m or 3m available. Goods are in stock. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. More information on request. (changes and error ...

Kragarmregal OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4.5 running metres, 4 pcs. stder with boom Negotiation price: € 1,440,-- /net Offer consists of: 4 St. Stander with foot 3 m high 4 adjustable booms, per stand 100 cm, load capacity 800 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Load capacity per stand per side 3,200 kg Height of 2.5 m, 4 m or 6 m available Other compilation on request: Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, ...

Industrial suction hose Polyurethane flexible hose Industrial suction hose D = 80 mm linear meters of 10,50 EURO D = 100 mm linear meters of 13.90 EURO D = 120 mm linear meters of 15,50 EURO D = 140 mm linear meters of 18.50 euros D = 160 mm linear meters of 20.50 EURO D = 200 mm linear meters of 28.50 euros Continuous lengths 2,5m/5m/7.5m and 10 m available! (Hose length = solid state!) Special NET zzgl.19% VAT

The laser device series NBL, consistently adaptable to your needs, allows you this economic and durable engraving of single pieces and small series, directly from the computer. Ideally suited for medical instruments, devices and transplants. No consumables. In a special process you can even mark glass - instant - durable. So, you can mark on your products easy and flexible variable data, for example a 2D barcode, or QR code in the highest quality. Also plastics are possible, like E.g. an attractive customer card, with photo or graphics, in brilliant quality. Laser marking is resistant to abrasion, penetrates deep into the material and thereby effectively resists tampering attempts and adverse effects due to environmental influences, to a large extent. Only a standard PC (not included) is required for the Operation where the software supplied is running to operate the laser.  ...

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...