flat printing used for sale

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

165 hL – Chalvignac – 304 stainless steel tank flat bottom This CHALVIGNAC stainless steel tank with a capacity of 165 hL is designed for the storage of liquids. Its configuration, combined with a vertical cylindrical tank with a flat bottom, a total emptying with a decanter elbow and filtration grid, as well as a complete control and withdrawal equipment, makes it a robust second-hand solution that can be immediately used to supplement an existing storage capacity. Technical characteristics Brand: CHALVIGNAC Material: stainless steel Total capacity: 16,500 litres Roof 1 chimney centred with stainless steel hatch 1 ferrule footbridge support 1 ladder support 1 rectangular door flush with the bottom 1 tap and level strip 1 taster tap 1 winding column Bottom Flat bottom 1 total drain valve with decanter elbow and filtration grid Dimensions Diameter: 2600 mm Height: 3800 mm ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

grinding range: 1000 mm Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Detailed manual attached Loading dimensions: 400 x 250 x 100 mm Auction-ID: A7-51355-1042

Detailed manual attached Loading dimensions: 400 x 250 x 100 mm Auction-ID: A7-51355-1041

Detailed manual attached Loading dimensions: 400 x 250 x 100 mm Auction-ID: A7-51355-1043

Single piece loading dimensions: 2200 x 100 x 100 mm Cross-section: 60 x 35 mm Length: 2100 mm Auction-ID: A7-51355-1068

Detailed manual attached Loading dimensions: 400 x 250 x 100 mm Auction-ID: A7-51355-131

Orschaner / Stanko 3G71 - Surface Grinding Machine - Sinusoidal magnetic clamping plate - Various accessories - Year of construction 1973 Technical data Basic data: - Accuracy class (GOST 8-71 / 8-82): В (high) - Max. workpiece size L×W×H: 630 × 200 × 320 mm - Max. workpiece weight (incl. magnetic plate): 100 kg - Table surface (magnetic clamping plate): 500 × 200 mm - Distance spindle axis – table: 80 - 445 mm Table movements: - Longitudinal movement (X): max. 710 mm - Transverse adjustment (Z): max. 235 mm - Table speed longitudinal: 5 - 20 m/min (infinitely variable) - Automatic cross feed per stroke: 0.3 - 4.2 mm - Hand feed longitudinal (1 turn handwheel): 15.3 mm - Manual feed transverse (pitch): 0.05 mm Grinding spindle / grinding wheel: - Grinding wheel dimensions: Ø 250 × 32 × 20 mm - Grinding wheel speed: approx. 2680 – 2740 rpm - Vert ...

Brand: KÖGEL Type: SNCO 24 First registered : 26/03/2002 Chassis Number: WK0SNC02420796470 MAW: 39,000 kg Curb weight according to certificate: 6,330 kg Total length: 13.98 m Wheelbase indicated: 7.70 m Red chassis with side guards, mudguards and kickstands Registration certificate and certificate of conformity photographed Visible condition: corrosion and significant deterioration of the floor, with several parts missing leaving the sleepers visible. Repairs to be planned. Last technical inspection presented: valid until 25/03/2023. The report mentions corrosion of the chassis and springs, as well as a defective attachment of additional equipment. Current state of braking and roadworthiness to be checked. Auction-ID: A3-46109-35356

KUHN Prolander 500 R Demonstration Machine Manufacturer: KUHN Model: Prolander 500 R Year of construction: 2024 according to the nameplate Working width: 5.0 m Facilities Tines 70 x 12 mm, 1T Standard coulter, reversible Goosefoot coulter 200 mm Flexliner roller, 540 mm diameter Seed harrow Prolander 500 R Hydraulic roller adjustment Instruction manual Auction-ID: A1-51207-2284

Brand: RAUW Model: SA 39/3 Gross vehicle weight indicated: 39,000 kg Maximum axle load: 9,000 kg Maximum Swivel Load Indicated: 15,800 kg Open top with high and perforated metal front apron Weweler mechanical stands LHD2000 Side guards and mudguards

Brand: Schmitz Cargobull. Type: S01. Chassis number: WSM00000003125870. Length indicated on the plate: 13.90 m. Width: 2.55 m. Maximum weight allowed according to the plate: 39,000 kg. Maximum axle load: 9,000 kg. Maximum load on pivot: 12,000 kg. Open top with front wall. JOST parking stands. Side protections. The papers of the semi-trailer are present and will soon be added as a photo to the ad. Auction-ID: A3-46109-35351

Manufacturer: COPRODIS Equipment: double axle, non-slip metal platform, two rear loading ramps with wooden surface, drawbar with drawbar and inertia braking, front stand, galvanised metal structure. Notes: Used trailer. Visible registration: BV-472-RJ. Auction-ID: A1-51439-21

Manufacturer: COPRODIS Year: 1994 Type/Function: Flatbed trailer on two axles Capacity: GVW 3500 kg Equipment included: Two vertical loading ramps, drawbar with drawbar with towbar, inertia brake, front stand Tyres: 205/75 R16C Auction-ID: A1-51439-6

New and unused Küppersbusch DEF9800.0E built-in flat screen hood in high-quality stainless steel design. With a width of 90 cm, a pull-out flat panel and an air output of up to 706 m³/h, it is ideal for spacious and modern kitchens. The extendable flat panel increases the vapour absorption area if required and can be pushed back to save space after use. Six power levels, including intensive level, allow performance to be adjusted as required. Technical data: Brand: Küppersbusch Model No.: DEF9800.0E Product type: Built-in flat screen hood Design: Stainless steel Device width: 90 cm Energy efficiency class: A+ Energy consumption: approx. 40.1 kWh/year Performance levels: 6 including intensive level Air flow normal maximum level: approx. 498 m³/h Air capacity intensive level: approx. 706 m³/h Noise level: approx. 53–65 dB, intensive level approx. 70 dB Control: Electronic push ...

Manufacturer: COPRODIS Axle load 1: 1,300 kg Axle load 2: 1,300 kg Equipment: double axle, platform with wooden floor, two rear loading ramps, drawbar with towbar ring, jockey wheel / front stand, visible electrical connections, galvanised metal structure. Notes: Used trailer. Visible registration: DQ-024-QQ. Auction-ID: A1-51439-19

Manufacturer: Ayhan Ünsal Model / Type: 3AYH Lowbed \"Wonderful\" Year: 2026 VIN: NR93AYH00TK088008 Type Approval: e242018/8580050100 Technically Permissible Max. Mass: 60,000 kg Kingpin Load: 24,000 kg Axle Configuration: 3 axles Axle Load Capacity: 3 × 12,000 kg (36,000 kg total axle group) Brake System: WABCO TEBS-E (ABS 2S/2M) Suspension: Air suspension Loading Platform: Flat low-bed deck Rear Ramps: 2 hydraulic loading ramps Landing Gear: Mechanical landing legs Tyres: 24 / 30 tyre configuration (see identification plate) Compliance: CE marked Manufacturer: Ayhan Ünsal Remarks: New unused low-loader semi-trailer. Designed for transport of construction machinery and heavy equipment. Approximate Own Mass: approx. 8,200 kg Approximate Dimensions (L x W ): approx. 13,600 × 2,550 mm Auction-ID: A1-50932-8

New and unused Küppersbusch DEF9800.0E built-in flat screen hood in high-quality stainless steel design. With a width of 90 cm, a pull-out flat panel and an air output of up to 706 m³/h, it is ideal for spacious and modern kitchens. The extendable flat panel increases the vapour absorption area if required and can be pushed back to save space after use. Six power levels, including intensive level, allow performance to be adjusted as required. Technical data: Brand: Küppersbusch Model No.: DEF9800.0E Product type: Built-in flat screen hood Design: Stainless steel Device width: 90 cm Energy efficiency class: A+ Energy consumption: approx. 40.1 kWh/year Performance levels: 6 including intensive level Air flow normal maximum level: approx. 498 m³/h Air capacity intensive level: approx. 706 m³/h Noise level: approx. 53–65 dB, intensive level approx. 70 dB Control: Electronic push ...

New and unused Küppersbusch DEF9800.0E built-in flat screen hood in high-quality stainless steel design. With a width of 90 cm, a pull-out flat panel and an air output of up to 706 m³/h, it is ideal for spacious and modern kitchens. The extendable flat panel increases the vapour absorption area if required and can be pushed back to save space after use. Six power levels, including intensive level, allow performance to be adjusted as required. Technical data: Brand: Küppersbusch Model No.: DEF9800.0E Product type: Built-in flat screen hood Design: Stainless steel Device width: 90 cm Energy efficiency class: A+ Energy consumption: approx. 40.1 kWh/year Performance levels: 6 including intensive level Air flow normal maximum level: approx. 498 m³/h Air capacity intensive level: approx. 706 m³/h Noise level: approx. 53–65 dB, intensive level approx. 70 dB Control: Electronic push ...

New and unused Küppersbusch DEF9800.0E built-in flat screen hood in high-quality stainless steel design. With a width of 90 cm, a pull-out flat panel and an air output of up to 706 m³/h, it is ideal for spacious and modern kitchens. The extendable flat panel increases the vapour absorption area if required and can be pushed back to save space after use. Six power levels, including intensive level, allow performance to be adjusted as required. Technical data: Brand: Küppersbusch Model No.: DEF9800.0E Product type: Built-in flat screen hood Design: Stainless steel Device width: 90 cm Energy efficiency class: A+ Energy consumption: approx. 40.1 kWh/year Performance levels: 6 including intensive level Air flow normal maximum level: approx. 498 m³/h Air capacity intensive level: approx. 706 m³/h Noise level: approx. 53–65 dB, intensive level approx. 70 dB Control: Electronic push ...

New and unused Küppersbusch DEF9800.0E built-in flat screen hood in high-quality stainless steel design. With a width of 90 cm, a pull-out flat panel and an air output of up to 706 m³/h, it is ideal for spacious and modern kitchens. The extendable flat panel increases the vapour absorption area if required and can be pushed back to save space after use. Six power levels, including intensive level, allow performance to be adjusted as required. Technical data: Brand: Küppersbusch Model No.: DEF9800.0E Product type: Built-in flat screen hood Design: Stainless steel Device width: 90 cm Energy efficiency class: A+ Energy consumption: approx. 40.1 kWh/year Performance levels: 6 including intensive level Air flow normal maximum level: approx. 498 m³/h Air capacity intensive level: approx. 706 m³/h Noise level: approx. 53–65 dB, intensive level approx. 70 dB Control: Electronic push ...

New and unused Küppersbusch DEF9800.0E built-in flat screen hood in high-quality stainless steel design. With a width of 90 cm, a pull-out flat panel and an air output of up to 706 m³/h, it is ideal for spacious and modern kitchens. The extendable flat panel increases the vapour absorption area if required and can be pushed back to save space after use. Six power levels, including intensive level, allow performance to be adjusted as required. Technical data: Brand: Küppersbusch Model No.: DEF9800.0E Product type: Built-in flat screen hood Design: Stainless steel Device width: 90 cm Energy efficiency class: A+ Energy consumption: approx. 40.1 kWh/year Performance levels: 6 including intensive level Air flow normal maximum level: approx. 498 m³/h Air capacity intensive level: approx. 706 m³/h Noise level: approx. 53–65 dB, intensive level approx. 70 dB Control: Electronic push ...

New and unused Küppersbusch DEF9800.0E built-in flat screen hood in high-quality stainless steel design. With a width of 90 cm, a pull-out flat panel and an air output of up to 706 m³/h, it is ideal for spacious and modern kitchens. The extendable flat panel increases the vapour absorption area if required and can be pushed back to save space after use. Six power levels, including intensive level, allow performance to be adjusted as required. Technical data: Brand: Küppersbusch Model No.: DEF9800.0E Product type: Built-in flat screen hood Design: Stainless steel Device width: 90 cm Energy efficiency class: A+ Energy consumption: approx. 40.1 kWh/year Performance levels: 6 including intensive level Air flow normal maximum level: approx. 498 m³/h Air capacity intensive level: approx. 706 m³/h Noise level: approx. 53–65 dB, intensive level approx. 70 dB Control: Electronic push ...

Brand: FABREQUIPA Type: Low-bed semi-trailer Serial no.: B031002 / CD1321 (stamped) Axles: Configuration: 4-axle Loading ramps: 2 hydraulic rear loading ramps Landing legs: yes Deck: steel loading platform Dimensions: Overall length: approx. 12.2 m Overall width: approx. 2.72 m Equipment: Rear loading ramps: hydraulic, folding Tie-down lashing points: integrated along loading platform Mudguards: yes Lighting system: rear lighting installed Remarks: Heavy-duty low-bed semi-trailer suitable for transporting construction machinery and heavy equipment. Manufacturer plate partially illegible; identification number stamped on chassis. Shows normal signs of professional use. Approximate own mass: not readable on identification plate. Auction-ID: A1-50932-145

Mounting kit for 10 solar panels (2 rows of 5) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-50174-98

Mounting kit for 24 solar panels (4 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-50174-100

Mounting kit for 36 solar panels (6 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-50174-101

- Ford Transit Flatbed, Single Cab - Registration date: 24.10.2013 - 2.2 l TDCi diesel engine with 92kW (125hp) - Manual transmission - Mileage: 171,593 km (read) - Permissible total weight: 3,500 kg - Orange municipal version - Aluminium flatbed with foldable tail lifts - Trailer hitch available - Rotating beacons available and functional - Protective grille available behind the driver's cab - Vehicle shows signs of wear due to age and mileage - Engine compartment complete, no obvious missing parts recognizable - Tail lifts in good condition with slight scratches and signs of wear - Loading area with clear signs of wear - Interior slightly worn and used according to age - Hood faded - Rust at the entrance of the driver's side - Slight rust formation at the entrance of the passenger side - Rust on both wheel arches - Rust on the lower door area - Traces of rust on the veh ...

VW T6.1 Facelift Flatbed Double Cab – 2.0 TDI – 150 hp Vehicle data: - Manufacturer: Volkswagen - Model: T6.1 Facelift Flatbed - Year of construction: 2020 - First registration: 07.05.2021 - Mileage: 180,156 km - Engine: 2.0-liter TDI diesel - Displacement: 1,968 cm³ - Power: 110 kW / 150 hp - Transmission: 6-speed manual transmission - Drive: Front-wheel drive - Color: Yellow Equipment: - Double cab with rear bench seat - Open flatbed with aluminium side walls - Trailer hitch - Air conditioning - Radio with display - Loading area with wooden floor - Red and white warning markings - Former construction site vehicle Condition and maintenance: - Vehicle fully roadworthy - Timing belt changed in October 2026 (according to the seller's information) - Used vehicle from commercial use - Scratches and paint damage to the body - Signs of wear and dirt in the inter ...

Mounting kit for 72 solar panels (12 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-50174-102

Mounting kit for 16 solar panels (4 rows of 4) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-50174-99

Mounting kit for 6 solar panels (2 rows of 3) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-50174-97

Metaltronica Flat/E – Mammography Machine with Pedal Set Manufacturer: Metaltronica Model: Flat/E Auction-ID: A1-51618-461

grinding length: 800 mm grinding width: 400 mm workpiece height: 550 mm table dimensions: 1.200 x 400 mm speed spindle max.: 1.000 U/min. feed x-axis: 40.000 mm/min total power requirement: kW weight of the machine ca.: 4,10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface Grinding Machine Okamoto ACC 450 BJ 1996

Iveco Eurocargo 90E18 4x2 truck with double cab, built in 2009. Equipped with 7 seats, open cargo box with folding side and rear boards and separate closed material box behind the cabin. Equipped with a 3,920 cc diesel engine with an output of 134 kW (approx. 182 hp), manual transmission and Euro 5 emission class. Odometer reading: 203,113 km and 5,075 hours of operation. Own weight 5,080 kg, GVW 9,000 kg and payload approximately 3,920 kg. Wheelbase 4,815 mm and total length 8,640 mm. Belgian vehicle documents available. Inspection valid until 12/06/2026. Vehicle starts, drives and brakes properly. Auction-ID: A3-46113-22053

Brand: VDM Trailers Type: EA01 – BAB Variant – Version 075V Date of manufacture: 16/10/2023 Chassis number: YBJEA1BAB23115201 Maximum authorised weight: 750 kg Curb weight: 165 kg Theoretical payload: 585 kg Overall dimensions: 369 × 193 × 68 cm Loading length: 259.5 cm Axles: 1 axle, 2 wheels Tyres: 155/80 R13 84N Maximum load on the hitch: 75 kg Documents: certificate of conformity present in the photos. Auction-ID: A3-46113-35381

Multi-transport trailer 750kg EC 2 axles 1050kg Smooth concrete loading floor made of Finnish birch 12 mm 13-pole European lighting Auction-ID: A3-46113-31097

Portal Passage 200 mm Auction-ID: A1-51634-34

Portal Passage 200 mm Auction-ID: A1-51634-13

Portal Passage 200 mm Auction-ID: A1-51634-2

Portal Passage 200 mm Auction-ID: A1-51634-21

Portal Passage 200 mm Auction-ID: A1-51634-20

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41461-31

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 6 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41461-32

Van Hool 3B0073 3-axle extendible flat trailer – 2009 – up to 21.20 m – steered rear axle Specifications: Brand: Van Hool Type: 3B0073 Year of construction / first registration: 20-03-2009 VIN/chassis number: YE13B0073AA414292 Version: 3-axle extendible flatbed trailer Standard loading length: approx. 13.60 m Extendable: approx. 7.60 m Maximum extended length: approx. 21.20 m Own weight: approx. 8,900 kg Number of axles: 3 Axle brand: BPW Rear axle: knuckle-steered Suspension: air suspension Brakes: drum brakes Tyre Size: 385/65 R22.5 Chassis: Hot Rolled Customer Profile Cargo floor: hardwood Tire tread axle 1: left 8 mm / right 8 mm Axle 2 tire tread: left 8 mm / right 12 mm Tyre tread axle 3: left 8 mm / right 10 mm Features: Twist Locks for Container Transport Electrical and pneumatic connections Support legs at the front Particularities: Us ...

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41461-28

Portal Passage 200 mm Auction-ID: A1-51634-35