flat printing used for sale

Grinding area: 800 x 500 mm Travel X/Y: 1200 x 450 mm Max. workpiece height: 400 mm Grinding wheel dimensions: 400 x 50 x 127 mm Grinding spindle speed: 3600 min-1

A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible.

"The machine from 1992 is still in productive use and will be available from week 35." More details please on request!

Used line for extruding flat plastic film for grass yarn and carpet yarn Chinese production. The line includes: - Extruder, - Filter mesh machine, - Film extraction and cutting system, including stainless steel water container, - Stretching heating oven, - 3-roll stretching machine, - Fibrillator, - 3-roll annealing machine, - 3-roll cooling machine, - Oil lubricator, - Magnetic winding machine, - Side fiber crusher, - Side blower and waste collector, - Electric control cabinet.

max. format 49 x 65 cm Year of construction 2000 Flat pile feeder with suction head 4 fold pockets in the parallel fold section 1 folding blade in the cross-fold section 1 more fold pocket after the 1st cross break Shed display Price on request. We supply and install worldwide.

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -

Price 2 machines special price together €3000.--+ VAT (reclaimable) R1288 controlled flat knitting machine Universal Type MC- 740 PJ double-head machine knitting width approx. 2300mm also interesting as a spare parts carrier in terms of price Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

Mobile flat pile delivery for single and multi-feed production including press station and marking device for pack-by-package offset

Grinding length 600 mm Grinding width 320 mm Workpiece height max 500 mm Table movement longitudinally 750 mm Table movement transverse 340 m Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speeds 1500 rpm Rapid traverse vertical 400 mm/min Power 3,7 kw Automatic delivery Magnetic disk Coolant Setup Weight 2500 kg

Grinding area: 600 x 400 mm Magnetic table Coolant tank various grinding wheels

Type: ASP400HDN Serial number: 03137230 Year of construction: 2019 Belt width: 410 mm Belt speed: 2 - 15 m/min Product thickness: 2 - 45 mm Power: 3 x 400V, 50Hz, 4kW Dimensions: 2150 x 850 x 1450 mm Weight: 570 kg

Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible.

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg

Height=1.5 m, Overall length= 0.79 m, Overall width= 1.27 m, Net weight= 230 kg,

A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.

Key data: 400 mm, 200 mm

Ziersch & Baltrusch FS 2040 - Surface Grinding Machine - Magnetic clamping plate 400 x 175 mm -Hydraulic - Coolant device -Bandpass filter - Automatic transverse stroke not functional - Year of construction 1988 Specifications - Grinding area: 400 x 200 mm - Height adjustment: 410 mm - Magnetic table: 400 x 175 mm - Grinding wheels: 200 x 25 x 51 mm - Grinding wheel speed: 1420 / 2840 rpm - Motor power: 1.5 kW - Dimensions WxHxD: 1700 x 2100 x 1500 mm - Weight: approx. 1100 kg

Subject to prior sale - errors possible Internal reference number: D-1143-6

A digital UV flatbed printer Fuji is available. Rigid material: max. dimensions X/Y: 1250mm/2500mm, max. material thickness: 50.8mm, max. printing dimensions X/Y: 1260mm/2510mm, max. material density: 34kg/m². Roll material: max. printing width: 2190mm, roll width range: 900mm-2200mm, max. roll weight: 50kg. Ink type: KN series/KV series, channels: 5, colors: CMYK/white. Droplet size range: 6pl-42pl, min. print resolution: 1200dpi, print modes: 6, max. printing speed standard/roll: 22.8m²/18.9m²/h. Machine dimensions X/Y/Z: approx. 4100mm/2000mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. The machine is ready for shipment and cannot be demonstrated.

Key data: 600 mm, 375 mm

ELB Optimal 6375 SPS, year of construction 1995, grinding area 600 x 375 mm, the machine has been overhauled by us currently, the guide tracks are scraped in tolerance of a new machine, the bearings of the grinding spindle have been changed, accessories: Electric Perm magnetic clamping plate 600 x 350 mm, automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter. The machine is functionally tested and can be viewed at our premises under power, we are also happy to take over the installation and training on site, as well as the service in the future

The Zafferani FLAT 8FPE L is an electronic straight-line glass processing machine designed for grinding and polishing glass edges. Here are the key specifications of this model: ⚙️Technical Specifications of the Zafferani FLAT 8FPE L Characteristic Specification Number of grinding wheels 8 Glass thickness 3–22 mm Minimum glass size 80 × 80 mm Working height 890 mm Feed rate 0.4–3.2 m/min (16–128 in/min) Weight 2,100 kg Installed capacity 11.0 kW Power supply 230–400 Vac This machine is ideal for precision machining of glass in industrial applications, such as windows, mirrors and interior glass. 02.1.209

Grinding area 650x350 mm, Machine weight: 2500 kg in need of repair

Inv. Num. : 4518 Type: JA 500 A Producer: JUNG Created: 1994 Parameters: Control system: Siemens Operating hours: 10662 h Maximum grinding height of the workpiece: 375 mm Maximum spindle speed: 4200 1/min Minimum travel speed longitudinally (X-axis): 24 m/min Maximum travel speed longitudinally (X-axis): 24 m/min Grinding wheel diameter new: 250 mm Spindle power: 7.5 kW Maximum grinding length without grinding wheel extension (X-axis): 600 mm Maximum sanding length: 200 mm Machine height: 1000 mm Machine length: 3700 mm Machine width: 2100 mm Machine weight: 2,500 kg

Control: Xpress Cube Grinding width: 600 mm Grinding length: 1,500 mm Grinding height: 500 mm Grinding wheel diameter: 400 mm Table load: 1,200 / 625 kg Spindle drive: 10 – 52 kW Spindle cone: 60 / 75 mm Speed range: 1,450 – 3,500 rpm Accessories: Belt filter system Coolant Mist Extraction Type VMN-V12 Balancing system Magnetic disk

Key data: 600 mm, 600 mm

Manufacturer: ELB-SCHLIFF Model: SWR 50 T Refurbished: 2008 Shipping time: immediately Grinding area: Ø 600 X 300 mm Grinding wheels: max. Ø 400 X 100 x 127 mm Spindle cone: 60 mm Dimensions set-up: approx. 2800 X 2800 X 2300 mm L/W/H Total weight: approx. 5000 kg Control: Siemens PLC

Grinding length: 600 mm Grinding width: 200 mm Clamping surface of the table: 600 x 200 mm Greatest distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically infinitely variable: 1 - 24 m/min Table transverse feed per hand rotation: 4 mm Grinding spindle speed infinitely variable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Approx. space requirement: 3100 x 1700 x 1900 mm

Surface Grinding Machine Aba FFK High-quality, hand-operated surface grinding machine Magnet size: 250 x 150 mm Dressing device on top of the spindle Maximum stroke in X direction: 390 mm Maximum stroke in Y-direction 180mm Height from magnet to spindle center: 395 mm Large Vernier Rings Includes 5 flanges with grinding wheels Dot diamond for magnet A dust extraction system is also available.

Key data: 400 mm, 150 mm

Year of manufacture 1983 Grinding length 400 mm Grinding width 150 mm Installation height 400 mm Table load 75 kg All feeds are infinitely variable Drive power 1.5 kw Automatic delivery Magnetic Plate 400 x 150 mm Puller Wet grinding device Machine is in good condition

Largest grinding length 1200 mm Longest grinding length with table dresser 1000 mm Largest grinding width 600 mm Grinding height (table bottom edge grinding wheel) 550 mm Table load with magnetic pallet 975 kg Table load without magnetic plate 1200 kg Table speed 1 - 40 m/min Grinding spindle Motor spindle 11 KW Grinding wheel 406 x 152.4 x 100 mm Speed 1400 rpm Longitudinal axis (z-axis) Rapid traverse 5 m/min Adjustable feed rate 1 - 50 mm Infinitely adjustable feed 0 - 2000 mm/min smallest infeed 0.001 mm Perpendicular axis (y-axis) Rapid traverse 1.5 m/min smallest infeed 0.001 mm Space requirement approx. 4450 x 2935 x 2540 mm Total weight approx. 6700 kg Equipment: - Electropermanent magnetic clamping plate 1000 x 500 mm incl. electron. Control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l - fl ...

Height=1.49 m, Overall length= 1 m, Overall width= 2.27 m, Net weight= 573 kg,

1 piece surface grinding machine FS 640 SC with Fagor control Make: Geibel&Hotz Year of Make: 2010 Technical data Working Range: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic plate dimensions 600 x 400 mm - Clamping surface table to spindle centre 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Power grinding spindle motor approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Transverse/vertical speed 100-1000 mm/min Dimensions 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Facilities machine-specific accessories, belt filter system, magnetic separator, extraction Magnetic clamping plate with adhesive force control, automatic dressing incl. compension, Dressing diamond, balancing device, clamping device, 4 grinding wheels

Inv. Num. : 6614 Type: - Producer: JUNG Generated: Parameters: Equipment: DRO In good technical condition.

JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles

ELB - SWN 5 VA II Surface Grinding Machine -Grinding range X/Y/Z 525x375x255mm -Magnetic plate 700x300mm -Table clamping surface 900x250mm -Table longitudinal stroke 10-625mm -Table load max. 280Kg -Table feed 1-30 m/min -Pendulum grinding 3-30 m/min -Distance - table to spindle center 525mm -Vertical feed speed 2-180 mm/min - Feed size - adjustable 0.001-2mm -Grinding wheel speed 3000 rpm -Coolant device -Machine feet -Documentation -COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 meters / Weight 3500Kg

Surface Grinding Machine ELB SWB06-VAII -Grinding length 600mm -Grinding width 500mm -Spindle speed 1400/2800 rpm -Z - Delivery / Automatic / Manual -Y - Delivery / Automatic / Manual -Grinding Movement / Automatic / Manual - Magnet size 600x500mm -Automatic delivery -Grinding wheels - Pulling device -Grinding wheel diameter max. 300mm -Coolant device -Drive cable approx. 6 KW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3500Kg

Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg

Key data: 340 mm, 160 mm

Surface Grinding Machine Lipemec PM300 XYZ = 340 x 160 x 240 mm Permanent magnet 250 x 130 mm Max. diameter of whetstone 200 mm Distance between table top and spindle axis 315 mm All feeds manually Digital display Heidenhein, 0.001 mm steps on 2 axes Table brake Dressing Diamond

Cup wheel Ø: 175 mm Table clamping surface: 150 x 250 mm large installation height without/with magnetic plate: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Approx. space requirement: 800 x 600 x 1600 mm Weight approx.: 200 kg

Flat screens div. 17 - 22 inch LG Fujitsu, partly traces of use

CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...

Model: PLT-400 Year: 2022 Condition: Used Serial Number: 10492297 Stock Number: 3190J Belt width: 400 mm Product thickness 3 - 51 mm Belt speed: 0.36 - 24 m/min Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg With extra long infeed conveyor of 1600 mm

odel ASP250N Jaar 2007 Conditie Gebruikt Serienummer 30502218 Voorraad nummer 2008 Belt width 250 mm Belt speed 1.2 - 12 m/min. Power 3 x 400V, 50Hz, 0.5kW Dimensions 2150 x 650 x 1350 mm Weight 320 kg

Auction-ID: A1-44302-12

Flat screen TV SAMSUNG approx. 55 inches, hanging on wall, data not visible

Flat screen TV SAMSUNG approx. 40 inches, hanging on the wall, no further data visible

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100

with washer assembly diameter range 6 mm shaft length under head 80 mm max. thread length 62 mm output - pieces/min 450