128,004 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
A Flashforge 3D printer including the associated filament drying and storage unit is available. 1) Industrial FFF-3D printer Flashforge Creator 4A with HT extruder, build volume dimensions X/Y/Z: 400mm/350mm/500mm, layer height range: 0.05mm-0.4mm, printing accuracy: +/-0.2mm, max. printing speed: 200mm/s, max. extruder temperature HS/HT: 360°C/320°C, machine dimensions X/Y/Z: approx. 850mm/700mm/1000mm, weight: approx. 100kg, operating hours: approx. 5600h. 2) Mobile Flashforge filament drying and storage station, max. drying temperature: 120°C, drying chamber dimensions X/Y/Z: 500mm/375mm/200mm, machine dimensions X/Y/Z: approx. 840mm/675mm/600mm, weight: approx. 70kg. Including F extruder, HS extruder, 2x HT extruders and a tool set. The mainboard was replaced at approx. 4378 operating hours. Documentation available. An on-site inspection is possible.
The synchronous generator Flash 2500 S is in good condition, ready to use. Built in approximately 1997 Weight 36 kg 230 V, 50 Hz, 9.7 A 2 kVA 3000 min IP 23 Altitude 100 m above sea level. NN Ambient temperature 27 � C Radio interference level DIN 57875 spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Transformer - Voltage Transformer 500 --> 380V Manufacturer Flasshoff & Klosterberg Type DTB50kVA Power 50kVA Primaer 3x500V - 525 - 550 59A Sekundaer 3x380V 76A Hz 50-60 Insulating-Kl.E External dimensions: Transformer 1m wide 92cm high 46cm deep Inside 33cm deep 74cm wide 80cm high Weight 450kg Special price
Transformer - Voltage Transformer 500 --> 220V 10kVA Manufacturer Flasshoff & Klosterberg Type DTB10kVA JP43 Power 10kVA Primae 3x500V 12A Sekundaer 3x220V 26,20A Hz 50-60 Insulating-Kl.E Special price
Manufacturer: Fladder, Type: Gyro 300, Year: 2006, Control: Programm, Number of units: 1, Working widht mm: 1300, Through running hight max mm: 120, Diameter of brushes: 320, Number of rotations controlled: yes, Units mounted upright: 4, Cross-brushing unit: yes, Through running hight max mm: 120, Vacuum belt: yes, Feeding speed continous adjustable: yes, Workpiece clamping technology: Vakuum, Year :2006
Hersteller : Fladder, Type: Gyro 300, Year: 1996, Number of units: 6, Engine power - kW: 12, Diameter of brushes: 320, Number of rotations controlled: yes, Fast exchange device: yes, Axle-diameter: 60, Vacuum belt: yes, Feeding speed continous adjustable: yes, Gewicht ca. kg : 2500, Year :1996
General SKU279X359 MakeFlavourtech TypeCentritherm CT1-09RM: vacuum centrifugal thin-film evaporator No.CT1-40EC-001A Year of construction2014 Mounted on framecheck Specified Features - Film evaporator MaterialStainless steel 1.4401 (316), Stainless steel 1.4435 (316L) Information LocationBarneveld Floorspace2,20 x 1,60 m Total height3,00 m Extra Specifications Design: single-effect Technology: spinning cone (rotating cone) Operation: continuous Product film thickness: ~0.1 mm Residence time: ~1 s Suitable products: heat-sensitive, high-viscosity liquids Sugar solution concentration range: 12 °Bx → 65 °Bx Sugar solution evaporation capacity: 50 kg/h Water evaporation capacity: 63 kg/h Heating medium: steam (jacket / steam chamber) Vacuum system: vacuum pump (non-condensables removal) Vapour handling: condenser + condensate pump Key outputs: concentrated pro ...
with two vacuum fans - Producer Fladder - Type Gyro 300 VAC-2 - Working width 1300 mm - Year of construction 1997 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - With sound insulating cabinet - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50
wird mit neuem VakuumTransportband ausgeliefert. - Producer Fladder - Type Gyro 300 VAC - Working width 1300 mm - Year of construction 1994 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50
Manufacturer: FlashForge Model: Creator 4-A Condition: Functional, used Operating hours: 5600 Package Contents - 1x Creator 4-A 3D printer - 1x power cable - 1x work gloves - 1x instruction manual - 1x drying station, filament storage and drying - 1x F-Extruder for flexible filaments - 1x HS extruder up to 360 degrees C - 2x HT extruders up to 320 degrees C - 1x tool set Printer Technical Data - Model: Creator 4-A - Extruder type: HT - Supported filaments: PLA, PETG, PC-ABS, PAHT, ABS, ASA, PP, PA, PC - Extruder model: IDEX - Nozzle size: 0.4 mm, 0.6 mm, 0.8 mm - Extruder temperature: up to 320 degrees C - Maximum chamber temperature: 65 degrees C - Build volume: 400 x 350 x 500 mm - Print speed: up to 200 mm per second - Maximum platform temperature: 120 degrees C - Touchscreen: 7 inch - Supported filament weight: 2 kg or 1 kg Filament Drying Station Technical Data - Dimensions ...
1- to 6-lane in stainless steel Hinged band chains with magnetic curves approx.25m Meter price: from EUR 290.00 /m
P57 - used appr. 3 m³ / 3,000 litres polyester tank / GRP tank, Staffelstein tank, aboveground, vertically standing, good condition. capacity: appr. 3 m³ / 3,000 litres material: polyester / GRP height: 2.40 m width: 1.04 m length: approximately 1.60 m (with lid 1.80 m) Aboveground, vertically standing tank, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as rain collection tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write ...
Soldering table Ceramics: 340 x 390 mm Equipped with: 2 Gasfackels Weight: 300 kg Table Lxwxh: 2000 x 900 x 1750 mm
Metal band saw blade, band saw blade, metal saw band -unused in: original packaging -Dimensions: 2625 x 20 x 0.9 mm -Toothing: 6/10 ZpZ W -Price: per piece -Number: 7 pieces -Weight: 0.4 kg/piece
Metal band saw blade, band saw blade -Condition: unused in original packaging -Number: 5x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 2085 x 20 x 0.9 mm
Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available -Price: per piece -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm -Weight: 0.6 kg
CONTROLS PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE Working width: 1000 mm number of brushing station: 6 BELT GRINDING UNIT workpiece height (max): 100 mm spindle revolutions (min): 0.3 /min spindle revolutions (max): 10 /min ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1800 mm space requirements -front/back-: 1750 mm total height: 2200 mm total weight approx.: 1500 kg
Conveyor belt No.01 Dimensions (L × W): 5 m × 0.70 m Conveyor belt No.02 Dimensions (L × W): 6 m × 0.70 m
PART NO. 7928 SPECIFICATIONS - max workpiece height 120mm - max workpiece width 1900mm - 6 brushes from above - Adjustable up/down unit - Oscillating aggregate - star-shaped grinding unit system, rotating - infinitely variable adjustment of the speed of rotation of the brushes on the inverter - infinitely variable feed speed, rotation and oscillation - main motor 7.5kW - vacuum table - two vacuum pumps 2×7.5kW - pump dimensions 1100x800x940mm - Diameter of the extraction port 4x150mm, 4x200mm - overall dimensions of the machine l/w/h 2850x2100x2400mm - weight approx. 2500kg ADVANTAGES – two vacuum pumps – with oscillation - Additional brushes included – rotating unit – German production – unpainted – original DTR documentation – used grinder, very good condition Net price: 45900 PLN Net price: 10929 EUR depending on the price of 4.20 EUR (P ...
PART NUMBER 8011 SPECIFICATIONS - max workpiece height 150mm - max workpiece width 1300mm - 6 brushes from above - Adjustable up/down unit - star-shaped grinding unit system, rotating - smooth adjustment of the speed of brush rotation - infinitely variable adjustment of the feed speed of the strip on the inverter - smooth speed control of the brush unit - belt feed 0.75kW - brush motor 6×1.5kW - generator speed motor 0.75kW - vacuum table - vacuum pump 7.5kW - Diameter of the extraction port 3x120mm - pump dimensions 1200x1000x1650 - overall dimensions l/w/h 2000x2500x2100mm - weight approx. 3000kg ADVANTAGES – width 1300mm – vacuum pump – rotating unit – German production – used grinder, very good condition Net price: 29900 PLN Net price: 7119 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
Max. workpiece height 100mm Max. workpiece width 1000mm Min. workpiece width 500mm Top unit 6 brushes Top/bottom adjustable unit Helicopter rotating system 2 types of brush rotation speeds Smooth adjustment of belt feed speed Belt feed 1.5kW 4kW motor Diameter of the exhaust port 180mm, 200mm
workpiece height max.: 100 mm workpiece width - max.: 1300 mm bending speed: 0,4 - 2,6 m/min number of spindles: 6 Stk Spindle length: 6 x 350 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,07 x 2,3 x 2,21 m Includes a recirculating conveyor system for workpiece carriers and an exhaust system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Perkin Elmer PinAAcle 900 F Flame AAS Perkin Elmer AAS PinAACle 900F F Flame AAS True double beam, 8 –lamp mount, Fibre Optic light path automated flame and burner optimization PC and Perkin Elmer WinLab Software Lamps on request Last Service 07/2022 with warranty
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Feed flange: mounting flange -Outside: Ø 160 mm -Recess: Ø 130 mm -Hole: Ø 25 mm -Bolt circle: Ø 139 x 10 mm -Dimensions: Ø 160 x 40 mm -Weight: 2.6 kg
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Bolt circle: Ø 105 x 10 mm -Dimensions: Ø 162 x 25 mm -Weight: 2.4 kg
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm -Weight: 4.7 kg
Specifications Bottero 108F Flat Poly Flat Glass Grinding Machine The Bottero 108F Plat Poly is a robust and precise glass grinding machine, designed for grinding and polishing flat glass edges in an industrial production environment. This used unit from 2004 works correctly and is ideal for companies looking for a reliable machine for daily edge finishing. Technical specifications Model: Bottero 108F Flat Poly Year of construction: 2004 Machine type: Straight-edge grinder (flat + poly) Number of grinding heads: 8 Machining: Flat edge, Polished edge, Deburring, Polishing Glass thickness: 3–40 mm (typical for this model) Transport system: Powered chain conveyor with glass guide Cooling system: Water-cooled grinding sections Speed control: Variable adjustable Connections: 400V power supply, Water inlet/outlet Machine condition: Functioning we ...
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 250 mm -Adapter: short cone size 8 (Ø135-139 mm) -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm -Weight: 11.2 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 225 mm -Mounting: cone Ø100-102 mm -Bolt circle: Ø 140 mm -Dimensions: Ø 225 x 165 mm -Weight: 8.1 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 160 mm -Hole: Short cone 4, cone Ø 60 - 63 mm -Bolt circle: Ø 85 mm -Dimensions: Ø 160 x 70 mm -Weight: 2.6 kg
Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 50 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 210 x 85 mm -Weight: 5 kg
Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 105 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 280 x 35 mm -Weight: 13 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 11 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 6 -Hole circle: Ø 133.4 mm -Weight: 7 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Admission thread: M96 x 6 mm -Flange width: 42 mm -Dimensions: Ø 495 x 115 mm -Weight: 60 kg
Chuck flange, flange mount, lathe chuck flange, driver flange -Chuck flange. driving flange -Outer diameter: 190mm -Intake: thread M165 x 3 -Taper cone: Ø 90 to 110 mm, groove 80 x 16 mm -Bolt circle: Ø 171 x 8 mm -Dimension: Ø190 x 82 mm -Weight: 7.5 kg
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 203 mm -Mount: M70 x 6.5 -Hole circle: Ø150 mm / M12 / Ø126/17 mm -Dimensions total Ø 203 x 60 mm -Weight: 6.4 kg
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Inside: Ø 100 mm -Hole circle: Ø180 mm/ M10 / Ø230/10 mm -Dimensions total Ø 250 x 23 mm -Weight: 6.1 kg
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 292 mm -Inside: Ø 22 mm -Hole circle: Ø212/10 mm / Ø108/11 mm -Dimensions total Ø 292 x 23 mm -Weight: 8.2 kg
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm -Weight: 1.4 kg
Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg
Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg
Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Bolt circle: Ø 133 mm -Dimensions total Ø 210 x 170 mm -Weight: 12.4 kg
Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Chuck flange: for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Passage: Ø 44 mm -Bolt circle: Ø 105 mm -Mounting: cone Ø 79-82 mm -Dimensions total Ø 205 x 160 mm -Weight: 6.3 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg
The Bottero 108F Plat Poly is a robust and precise glass grinding machine, designed for grinding and polishing flat glass edges in an industrial production environment. This used unit from 2004 works correctly and is ideal for companies looking for a reliable machine for daily edge finishing. Technical specifications: Model: Bottero 108F Flat Poly Year of construction: 2004 Machine type: Straight-edge grinder (flat + poly) Number of grinding heads: 8 Machining: Flat edge, Polished edge, Deburring, Polishing Glass thickness: 3–40 mm (typical for this model) Transport system: Powered chain conveyor with glass guide Cooling system: Water-cooled grinding sections Speed control: Variable adjustable Connections: 400V power supply, Water inlet/outlet Machine condition: Functioning well, immediately ready for use Why this Bottero 108F Flat Poly? ...
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Admission: thread, dimensions see drawing in the photos -Dimension: Ø 250 x 85 mm -Weight: 9.3 kg
maximum number of results exceeded
please refine your search
