135,190 used machines on RESALE, but how to find them? Machine Search
Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve type JL1040 without drive -Connection: DN50 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 230/165/H200 mm -Weight: 10.4 kg/pc.
Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN50 PN16 -Quantity: 2x valve available -Price per piece -Dimension: 230/170/H305 mm -Weight: 10.3 kg/pc.
Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C -Connection: DN50 PN6 -Quantity: 4x valve available -Price per piece -Dimension: 120/100/H210 mm -Weight: 6 kg/pc.
Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: KOSMA, gate valve, shut-off valve without drive -Connection: DN50 PN16 -Quantity: 2x valve available -Price per piece -Dimension: 230/165/H220 mm -Weight: 9.9 kg/pc.
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 292 mm -Inside: Ø 22 mm -Hole circle: Ø212/10 mm / Ø108/11 mm -Dimensions total Ø 292 x 23 mm -Weight: 8.2 kg
Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Bolt circle: Ø 133 mm -Dimensions total Ø 210 x 170 mm -Weight: 12.4 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 225 mm -Mounting: cone Ø100-102 mm -Bolt circle: Ø 140 mm -Dimensions: Ø 225 x 165 mm -Weight: 8.1 kg
Clutch, power clutch, gear clutch, transmission clutch, flange hub for crane chassis, wheel, bridge crane, overhead crane, assembly crane, flange hub -Flange hub: for crane chassis -Part No.: 1031 4152 suitable for gearbox ID 34705 / ID 34752 -Type: 60H7 Part 369 SDDL-5-BS-200 -Hole: Ø 60 mm -Bolt circle: Ø 170 x 15 mm -Quantity: 3 pieces available - Price: per piece -Dimensions: Ø 200 x 210 mm -Weight: 20.4 kg/piece
Coupling, power coupling, gear coupling, transmission coupling, flange hub for crane undercarriage, running wheel, bridge crane, hall crane, assembly crane, flange hub -Flange hub: for crane chassis -Art.No.: 2003 9116 suitable for gearbox ID 34705 / ID 34752 -Type: 75H7 Part 368 SDDL-5-200 -Hole: Ø 75 mm -Bolt circle: Ø 170 x 15 mm -Quantity: 2x pieces available -Price: per piece -Dimensions: Ø 200 x 170 mm -Weight: 14.7 kg/piece
Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Chuck flange: for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Passage: Ø 44 mm -Bolt circle: Ø 105 mm -Mounting: cone Ø 79-82 mm -Dimensions total Ø 205 x 160 mm -Weight: 6.3 kg
Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: flange ring -Inside: Ø 257 mm -Flange: bolt circle Ø 285 x 6 mm -Number: 34x flange ring available -Price: per piece / minimum order 2 pieces -Dimensions: Ø 307 x 4 mm -Weight: 0.7 kg/piece
Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: incl.transport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg
Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Feed flange: mounting flange -Outside: Ø 160 mm -Recess: Ø 130 mm -Hole: Ø 25 mm -Bolt circle: Ø 139 x 10 mm -Dimensions: Ø 160 x 40 mm -Weight: 2.6 kg
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm -Weight: 1.4 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 250 mm -Adapter: short cone size 8 (Ø135-139 mm) -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm -Weight: 11.2 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 160 mm -Hole: Short cone 4, cone Ø 60 - 63 mm -Bolt circle: Ø 85 mm -Dimensions: Ø 160 x 70 mm -Weight: 2.6 kg
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm -Weight: 4.7 kg
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Bolt circle: Ø 105 x 10 mm -Dimensions: Ø 162 x 25 mm -Weight: 2.4 kg
Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg
Rotary hub drive, center turning device -Outer diameter: 315 -Cone: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 20 kg
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN80 -Width: 190 mm -Nominal pressure: PN10 -Weight: 18 kg
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Type: 317 -without: drive -Plastic -Connection: DN25 -Width: 160 mm -Nominal pressure: PN10 -Weight: 1.2 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 3x201/1x190 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 2x discs still available -Price: complete -Weight: 11 kg
Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece
2-hole flange bearing -Type: M-UCT205JD1 -Price: per piece -Number: 8x available -Weight: 0.9 kg/piece
Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNG-50 TN 32 970 -Quantity: 12 pieces available Price: per piece -Weight: 0.3 kg/piece
A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible.
General Description Portable in-situ flange facing machine manufactured by MILLAS LTD . Designed for machining and resurfacing flange sealing faces directly on installed pipework, pressure vessels, heat exchangers and similar equipment without dismantling. Suitable for maintenance work in power generation, oil & gas, petrochemical and heavy industrial applications. Technical Details Manufacturer: MILLAS LTD Model: Not identified Machine type: In-situ flange facing machine Year: Not confirmed Drive: Electric geared motors Transport/storage frame included Main flange-facing drive assembly Radial feed mechanism Feed screws and extension bars Gearbox assemblies Cabling and mounting hardware included Marked weight: 3,500 kg Condition Good industrial used condition. The equipment appears complete with electric drive units, feed mechanism, transport frame and accessorie ...
Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece -Manufacturer: Rose Krieger, Flange clamp pipe connector flange, aluminum, one-piece for round tubes -Type: Size 12 mm -Number: 11x holders available -Price: per piece, minimum order 2 pieces -Dimensions: 50/35/H41 mm -Weight: 0.1 kg/pc.
A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible.
Key data: 15 KW, 2960 1/min
Electric motor, Flanged motor, 15kW, 2,960 rpm, 400V, AV3163A 1TZ90031DA334FB4-Z, Lammers, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Please note: A stainless steel fan impeller is fitted to the motor; we will include this free of charge, or, if you prefer, we will remove it before dispatch. - We are offering a truly special price; a comparable new motor costs approx. €1,900 excl. VAT or €2,280 incl. VAT. - Weight of the motor: 87 kg 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product pr ...
Key data: 7 KW, 2950 1/min
Electric motor, Flanged motor, 7,5kW, 2,950 rpm, 400V, 1CV3131A, 1LE16031CA134GB4, Siemens, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - is in its original packaging, - Please note: A fan impeller is fitted to the motor; we will include this free of charge, or, if you prefer, we will remove it before dispatch. - Weight of the motor: 79 kg 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only ...
Key data: 22 KW, 2960 1/min
Electric motor, Flanged motor, 22 kW, 2,960 rpm, 400V, 180M-02, Premium W22, Weg, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Please note: A stainless steel fan impeller is fitted to the motor; we will include this free of charge, or, if you prefer, we will remove it before dispatch. - We are offering an exceptional special price; a comparable new engine costs around €2,100 excluding VAT or €2,500 including VAT. - The engine is fitted with thermal protection - Engine weight: 182 kg 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of a ...
Friction wheel, running wheel, bridge crane, overhead crane, assembly crane, workstation crane, crane wheel, flanged wheel -Crane wheel: Flanged wheel, heavy-duty flanged wheel -Type designation: DG 009 232 0613/BM 59834544 -Impeller diameter: 225 mm -Track width: up to 55 mm -Hole: Ø 60 x 55 mm -Quantity: 1 piece available -Dimensions: Ø 255 x 85 mm -Weight: 8.5 kg
Bore: 90 mm, insert bearing with eccentric clamping ring Auction-ID: A1-49575-171
maximum number of results exceeded
please refine your search
8.000 € 
