fitting hydraulic used for sale

pressure:40 t passage width:2500 x 1300 mm stroke:1000 mm total power requirement:7 kW weight of the machine ca.:12 t draw back pressure:4 t Controll:Zweihandbedienung cylinder:1 work height max.:2200 (zwischen Stößel und Tischplatte) mm working area:2500 x 1300 mm Table dimensions:2800 x 1300 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec Oil Tank Capacity:150 l

Hydr. Double Column Press Fabr. KINDSMÜLLER Type KP 50 EMachine -No: 355, built in 1972Printing capacity max.:50 tStroke of the pistons: 400 mmRam speed before: 40 mm / secRam speed back: 85 mm / secPiston diameter: 120 mmTable size: 635 x 455 mmPassage between the uprights: 750 mmInstallation height: 740 mmTank capacity: 150 lDrive power: 4 kWExternal dimensions: 1200 x 1100 x 2400 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure:160 t stroke:600 mm total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm table load:5 t pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec quantity of oil:220 l

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

Hydr. Double-column drawing press make ECKOLD type UPP 60-10Mash. -No: 646/230 withHydraulic unit HAD 500/2, machine -No: 276/477Max. Press force: 60 tPassage between the uprights: 1400 mmTable width: 400 mmInstallation height: 650 mmWith- Tools for the production of drain potsxa0xa0xa0 for soil drainage, there are 3 sizes available- 2 drawing tools for top part of inlet boxesxa0xa0 Drm. 200 mm for 1.5 and 2.0 mm material thicknessused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure:40 t stroke:500 mm total power requirement:5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:2950 x 1300 x 2000 mm return capacity:6 t work height max.:700 mm pre-running speed:250 mm/sec :20 mm return speed:200 mm/sec pestle plate:500 x 400 mm table plate:600 x 450 mit T-Nuten mm Table cut-out:150 mm Durchmesser table height:1000 mm :200 l Oil Cooling:elektrisch light-barrier:700 mm

Hydraulic single-column press make SCHÖN type UTE-BCFabr. -No: 1619 built in 1977Max. Press force: 50 tStroke length: 150 mmTable size: 550 x 750 mmDiarrhea opening: 80 mmBear size: 500 x 300 mmOutreach: 280 mmInstallation height: 350 mmPassage width to the rear: 150 mmDrive power: 7.5 hpDimensions L x W x H: 1300 x 1400 x 2400 mmWeight approx. 2000 kgWith- adjustable stoppage time- Blower- Jogging mode- Photocellused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

Hydr. Four-column press make FIBRO FISCHER-BRODBECK type UVOS 20-SMachine -No: 12-302-06, built in 1967Press force: 20 tRetraction force: 10 tOperating pressure: 250 barPiston diameter: 100 mmStroke: 420 mmTable and bear size: 730 x 510 mmClear dimensions between the columns: 290/500 mmInstallation height: 600 mmColumn diameter: 70 mmWeight approx: 1350 kgExternal dimensions approx: 1200 x 1150 x 2400 mmWith- Pressure display- Pressure control- Holding time setting- Zweihansausrückung- Emergency stop switchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Hydraulic single column press make HENSELER type PYE 6,3 x 200 SMachine -No: 136 built in 1969Compressive force: 6.3 tPressure force on: 3.5 tRam speed from: 120 mm / sec.Ram speed to: 220 mm / sec.Projection: 200 mmStroke: 315 mmPiston diameter: 80 mmInstallation height: 500 mmTable height: 800 mmTable surface: 380 x 420 mmTable hole: 100 mmPusher bore: 32 x 60 mmOil filling: 120 lOutside dimensions approx: 650 x 1100 x 2100 mmDrive power: 4.0 kWWith- Two-hand release- Press time adjustment- Pressure control- Hand lever operation- pneumatic hold-down- Speed control by hand lever in setup modeused, despite the year of construction in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

pressure:40 t passage width:2500 x 1300 mm stroke:1000 mm total power requirement:7 kW weight of the machine ca.:12 t draw back pressure:4 t Controll:Zweihandbedienung cylinder:1 work height max.:2200 (zwischen Stößel und Tischplatte) mm working area:2500 x 1300 mm Table dimensions:2800 x 1300 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec Oil tank capacity:150 l

pressure:30 t passage width:1000x1000 mm stroke:800 mm total power requirement:3 kW weight of the machine ca.:5 t dimensions of the machine ca.:3360x1300x1360 mm return capacity:3 t column diameter:75 mm traversing speed:bis 200 mm/sec. :0-10 mm/s :200 mm/sec table height over floor:900 mm distance table - lower edge of ram:1000 mm :126 mm diameter of piston:71 mm

Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure:20 t stroke:600 mm table surface area:2000 x 600 mm dimensions:ca. 3500 x 1200 x 2800 mm total power requirement:3 kW pre-running speed:9,9 mm/sec return speed:25 mm/sec Pressure power:180 bar :100 l weight of the machine ca.:3 t :5 Zoll

Hydr. High-speed single-column press Fabr. DUNKES type HZS 40Machine -No: H 77-581, built in 1981Press force: 40 tOperating pressure: 270 barStroke: 150 mmInstallation height: 400 mmOutreach: 280 mmRapid traverse: 400 mm / sec.Rapid traverse to: 400 mm / sec.Pressing under full load: 14 mm / sec.Table height: 820 mmTable surface: 600 x 515 mmDiarrhea hole in the table: 100 mm Drm.Drive power: 7.5 kWWeight: 3.1 tOil filling: 230 lExternal dimensions: 850 x 1200 x 2390 mmWith- Cutting impact damping- Safety 2-hand control- self-holding with rapid traverse shutdown- Electric return stroke limitation- Setup tip circuit- Fully automatic workflow- Emergency stop switch- stepless force preselection- graduated Adj. mech. depth stop- Switching in the lower stroke rangexa0xa0xa0 Lift and time changeoverxa0xa0xa0 Lift and pressure changeover- separate hydraulics for drawing cushionsused, in good co ...

pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

pressure:160 t passage width:1200 mm stroke:600 mm Weight of machine approx.:7 t dimensions:ca. 2400 x 1400 x 3400 mm return capacity:16 t Max Working height:800 mm Return Speed:25 mm/sec pestle plate:1670 x 800 mm table plate:1670 x 800 mm table height over floor:800 mm Oil cooling (electric):1,5 kW (max) Engine Output:18 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Travel:600 mm Oil Tank Capacity:300 l

pressure:110 t passage width:1300 mm stroke:1500 mm Weight of machine approx.:12 t dimensions:ca. 2300 x 2090 x 4200 mm return capacity:11 t Max Working height:1500 mm pestle plate:1730 x 1100 mm table plate:1730 x 1100 mm table height over floor:700 mm column diameter:140 mm Thickness of ram plate:100 mm thickness of clamping plate:100 mm Noise Level (Max.):67 dB Color machine body:7035 RAL Color moving parts:2009 RAL Colour other components:7021 RAL Colour of balcony and casing:1021 RAL motor capacity:18 kW Approaching Speed max. :300 mm/sec pressure speed:15 mm/sec Oil Tank Capacity:150 l Siemens Control System:S7 1200

pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

pressure:1000 t passage width:1500 mm stroke:800 mm total power requirement:91 kW weight of the machine ca.:68 t dimensions:3850 x 2900 x 6000 mm return capacity:100 t Table dimensions:1500 x 2250 mm :1500 x 2250 mm table height over floor:1300 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:10 mm/sec :1200 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:12 Zoll

pressure:160 t passage width:1000 mm stroke:800 mm total power requirement:22 kW weight of the machine ca.:13 t dimensions:2300 x 2850 x 4000 mm return capacity:16 t Table dimensions:1430 x 1000 mm :1430 x 1000 mm table height over floor:850 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:15 mm/sec :400 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:10 Zoll

pressure:200 t distance between columns:1900x1200 mm stroke:1000 mm total power requirement:44 kW weight of the machine ca.:32 t dimensions of the machine ca.:4793 x 3365 x 4779 m Hydraulic block:Bosch Rexroth demand for oil:800 l Sliding door front with a closing speed of:300 mm/sec open height:1400 mm Table Height:820 mm Ram Height:1000 mm Lifting capacity:20 t Lowering speed in the empty journey:80 bis 270 mm/sec Press speed:7 bis 25 mm/sec On driving speed:50 bis 170 mm/sec bending stiffness according to standard:0,2 mm Siemens Control System:S7 1200 Monitor:WEG 12 Zoll

pressure:100 t passage width:650 mm stroke:500 mm weight of the machine ca.:10 t dimensions:4800 x 1300 x 2650 mm return capacity:10 t :29 kW Max Working height:1000 mm :10 mm :10 mm/sec. :500 mm pestle plate:600 x 600 mm table plate:600 x 600 mm table height over floor:700 mm :600 l speed rapid traverse:10 mm/sec Oil cooling (electric):1,5 kW (max) Monitor SIEMENS:7 Zoll

pressure:40 t passage width:1000 mm stroke:400 mm Weight of machine approx.:3,5 t dimensions:2065 x 700 x 2905 mm return capacity:4 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:1320 x 600 mm table plate:1320 x 600 mm table height over floor:750 mm Oil cooling (electric):1,5 kW (max) Engine Output:8 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:200 l speed rapid traverse:10 mm/sec column diameter:100 mm :2400 ? Maintenance Balcony:3600 ? :4600 ? Ground tub of lacquered steel:850

pressure:350 t passage width:3000 mm stroke:900 mm total power requirement:75 kW weight of the machine ca.:60 t dimensions:2660 x 5400 x 5700 mm return capacity:35 t Table dimensions:3610 x 1600 mm :3610 x 1600 mm table height over floor:900 mm pre-running speed:230 mm/sec return speed:170 mm/sec :2000 l max. working heidht:1700 mm pressure speed:21 mm/sec speed rapid traverse:200 mm/sec Oil cooling (electric):3 kW (max) :S7 1500 Monitor:WEG 12 Zoll

pressure:20 t passage width:1500 mm stroke:500 mm total power requirement:3 kW weight of the machine ca.:6,5 t dimensions:ca. 2700 x 1700 x 2700 mm Max Working height:1500 mm return capacity:2 t Table dimensions:1500 x 2100 mm :1500 x 2100 mm table height over floor:900 mm pre-running speed:10 mm/sec pressure speed:10 mm/sec return speed:25 mm/sec speed rapid traverse:10 mm/sec :150 l :AW46 Monitor:(WEG) 7 Zoll

pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm pestle plate:600 x 500 mm table plate:800 x 700 mm Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

pressure:20 t passage width:500 mm stroke:250 mm Weight of machine approx.:2,6 t dimensions:1200 x 1400 x 2900 mm power capacity:11 kW table plate:450 x 400 mm Table cut-out:150 x 150 mm table height over floor:900 mm max. working heidht:500 mm Return Capacity:2 t Approach Speed:300 mm/sec pressure speed:50 mm/sec speed rapid traverse:300 mm/sec Travel:250 mm Oil Tank Capacity:250 l Oil cooling (electric):1,5 kW (max) Monitor:Siemens 10 Zoll

pressure:220 t passage width:1500 mm stroke:400 mm weight of the machine ca.:5,2 t dimensions:ca. 4000 x 1950 x 2900 mm return capacity:20 t total power requirement:30 kW Max Working height:500 mm :10 mm :10 mm/sec. Return Speed:25 mm/sec speed rapid traverse:10 mm/sec pestle plate:2000 x 400 mm table plate:2000 x 600 mm table height over floor:900 mm :500 l Oil cooling (electric):1,5 kW (max) measuring system:TURCK oder Balluff :S7 1500 oder PILZ PSS 4000 Monitor SIEMENS:oder OMRON

pressure:500 t passage width:1100 mm stroke:600 mm Controll:Zweihandbedienung cylinder:1 Stück motor:37 kw work height max.:900 mm Table dimensions:1000 x 1000 mm table height over floor:900 mm pestle plate:1000 x 1000 mm Main cylinder:Ø 500 mm Auxiliary cylinder:2x Ø 120x70 mm Daylight Opening:900 mm :150 Lt./min. Approach Speed:150 mm/sec Pressure Speed:15-3 mm/sec Return Speed:150 mm/sec Heating collectors:max 250 °C Light sensors sick:900 + 150 mm Monitor:12" SIEMENS Zoll Ruler measuring rod for setting the stroke length:NOVOTECHNIK

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...

No. 4973: 1 gebr. Hydraulic unit 250 l / 60 bar / 40 l/min Fabr. UNIVERSAL Hydraulics, Bauj. 1987 with formerly HEYLIGENSTAEDT Heynumat 10 Arb.-Ber.: approx. 900 x 650 x 1500 mm, drive power: 5.5 kW Other: approx. 300kg (estimated)

Hydr. Sheet Metal Shear Make MENGELE Type S 4 - 5000/3Machine -No: S 2237 5000/3 Year 1976Cutting length: 5050 mmMax. Sheet thickness: 3.0 mmlateral. Discharge: 300 mmCutting angle: 0.6 °Strokes per minute: 34Number of hold-downs: 22mot. backgauge: 0 - 1000 mmlateral. Angle stop: 2000 mmOperating pressure: 230 barHold-down pressure: 58 barOil filling: 200 lDrive power: 11 kWOutside dimensions approx: 5750 x 2500 x 1700 mmWeight approx: 15 tWith- mot. backgauge- Angle stop front- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Used hydraulic pump, Voith IPH 5/64 gear pump, for sale in good condition. Capacity 92 l / min.

Hydr. Sheat metal Shear make EHT type EHS 6-50Machine -No: 19782 Year 1983Max. Sheet thickness: 6.0 mmCutting length: 5050 mmKnife length: 5100 mmCutting angle: 1 - 15 °Knife strokes per minute: 18Number of hold-downs: 26Pressure p. Hold down: 60 barOperating pressure: 280 barOil filling: 220 lDrive power: 12 kWWeight approx: 11 tOutside dimensions approx: 5500 x 2900 x 2100 mmWith- mot. back gauge 1500 mm with length indicator- Cutting angle indicator- Cutting angle adjustment- Cutting length limit- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make LOTZE type TS 3000/5machine -No: 2623003 year 1975Technical specifications:Max. Effective length: 3040 mmMax. Sheet thickness steel: 5.0 mmMax. Sheet thickness stainless steel: 3.0 mmOutside dimensions approx: 3750 x 1255 x 1600 mmWith- motor backgauge with handwheel fine adjustment- Cutting length limit- Angle stop front- Table extension- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sale of Moog RKP 80 + Voith internal gear pump. Exact type of lashing pumps: Moog 2518218727 + Voith IPC / 5/50. The Moog pump has 80 cm3 and the Voith pump 50 cm3. The pumps run approx. They've spent 3,000 hours on pure oil, so they're new.

Hydraulic swing cut guillotine shears make HERA type HSS 3Machine -No: 557 built in 1984heavy, unbreakable all-steel designTechnical specifications:Passage: 1100 mmLarge sheet thickness at 400 N / mm 2.0 mmThroat: 200 mmNumber of strokes: 56 H / minStop length at the front: 1000 mmStop length at the back: 1000 mmMotor power: 2.2 kWWeight about 1500 kgDimensionswith- motorized backgauge- foot switch- front support arms- hydr. Hold-downused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sell a new pair of hydraulic pumps, Moog RKP 63 + Moog RKP 45 pumps. Exact type of connected pumps: Moog HP-R18B1-RKP063 + Moog HP-R18B1-RKP045. The pumps also include electrohydrautic controls. The pumps are new, not yet mounted.

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic panel shears - storage machine - incl. foot switch, touch screen, rear installation room with light barrier monitoring, automatic/electric cutting gap, automatic/electric cutting angle, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - storage machine - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Sheet thickness: 4,5 mm Bending length: 1000 mm Number of rolls: 3   Rolling width:                 1000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  3mm Top Roll Ø:                    110mm Bottom Roll Ø:                 110mm Side roll Ø:                   110mm Number of rolls:               3 Rolling speed:                 5 Power:                         4kW Length:                        1500mm Width:   ...

Hydraulic Owner: Mahle Pressure capacity: 110 bar Flow rate: 32 L/min 160 l/min at 2 mWS 160L Tank

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

Hydraulic lifter,Silverson model E,1000 mm stroke.

Used KLAUKE HK 12/2 EL / HK 25/2 EL Hydraulic pump press pliers Connection 400V 16A Press pliers Klauke PK 120 Pressing range up to 400mm² C-head with 42mm opening width For Series 13 Press Inserts Without pressing insert Good condition. Fully functional See pictures Original price complete approx. 7000.-Euro gross Viewing and pick-up possible Shipping Germany (without islands) 119,00 Euro including 19% VAT The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 The price includes 19% VAT. You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.