fischer krecke 10 used for sale

1m wide OptiFlour II. Bought new in 2022 and only used for a few months. Almost as brand new condition. Matching OptiAir dust extractor available at extra cost.

Milk E-Heating System PHE, Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump., Make: DMUK, Capacity: 1000-1000 L/h, Temperatures: Regulated by the controls, Circulation Pump: Included, Control Panel: Included, VDF: Included, Condition: Excellent

Key data: 2075 mm, 1000 mm, 700 mm

Pair of cast iron angle plates Width: 1000 mm Height: 2075 mm Depth: 700 mm Unit weight: 1 T

Key data: 3000 mm, 1000 mm, 1245 mm

Pair of cast iron angle plates Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Inv. Num. : 8525 Type: LG 1000 Producer: Hartford Created: 2017 Parameters: Control system: FANUC AI 100 Hours: 9285 h Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3 Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No.: 22004 ...

MECCANOPLASTICA GRANULATOR, type BLC1000, 1.000 mm wide rotor, 75 kw.drive, hydraulic pack for opening the machine, including loading conveyor belt, metal detector, CEIA, extraction blower, conatructed in 2001, offered reconditioned, installed power - used power in work: about 60-65% : 75 kw, availability: 4 weeks from confirmation, working width: 1000 mm., options available: CEIIA metal detector + loading conveyor belt + extraction blower, conditions: will be reconditioned, type: BLC1000

Transport height range: 800mm-1000mm, buffer capacity: 10 blanks, blank length range: 70mm-460mm, blank width range: 50mm-460mm, blank thickness range: 0.3mm-3mm, max. individual blank weight: 2kg, max. total blank weight: 20kg, cycle time (FIFO): less than 15s. Machine dimensions X/Y/Z: approx. 1150mm/1400mm/1550mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.

power capacity: 4 kW feed pressure: 10 bar liter capacity: 490 Lieter / min Receiver capacity: 350 l motor speed: 1500 U/min voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m • 2 piston-compressor with tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-1000 L , Capacity: 1054 Litres , C ...

Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Weightapprox: 600 kg

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Drying container Piovan 2 x 100 L BJ 1998

Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength: 1000 mmWidth: 800 mmThickness: 250 mmWorking height: 820 mmPlate thickness: 30 mm throughout- height-adjustable metal substructureWeight: approx. 400 kgSurface rusted; used

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmWidth 1000 mmThickness 230 mmWorking height 970 mmPanel thickness 38 mm throughout- Metal baseWeight 450 kg; used

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132Fabr. No. 173082 - 3101 Year of manufacture: approx. 1995Volume flow: approx. 50 m3/hNegative pressure: 0.5 mbar (indicated on the nameplate)Negative pressure: - 0.9 bar (determined during test run)Engine power: 3 kWMotor speed: 1420 rpm. Mains connection: 400 volts, 50 Hz- Oil-lubricated rotary vane pumpDimensions L x W x H: 700 x 420 x 310 mmWeight: 78 kgGood condition; used

Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-

Straightening and welding plate SIEGFRIED WEYRAUCH GemmingenCast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmwidth 800 mmthickness 28/125 mmworking height approx. 850 mm- feet with adjustment screws for aligning the plateWeight 370 kggood surface; used

Turning table, 180 rest table, rotary table with aluminium topPositioning table, rotary table, round dividing table 180Assembly table, swivel tableTurntable: 1080 mmOverall height to top edge turntable: 630 mm- Turntable made of 25.5 mm thick aluminium plate with various holes- very stable turntable, can be rotated by hand- 2 pieces index locking positions 180, manually via foot lever for de-latching- stop damper under the turntable for the locking positions- very stable steel substructure- flange plate steel substructure L x W x H = 600 x 600 x 20 mmSpace requirement

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801899 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.7 metersPower supply: 400 volts, 50 Hz1 load train = 100 kgWeight 16.5 kgGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801900 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz1 load string = 100 kgWeight 16.5 kgGood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedheavyheavy, straightening plateLength: 1985 mmWidth: 1000 mmThickness with ribs: 220 mmWorking height: 860 mmPanel thickness: approx. 35 mm throughout- 4 pieces height-adjustable feetWeight 1050 kg; used

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

turning diameter: 545 mm turning length: 753 mm control: Mazatrol Matrix 2 Main Spindle:: c-axis: 0,0001 ° spindle motor: 11 kW spindle turning speed range: 6000 U/min x-axis: 410 mm z-axis: 805 mm y-axis: 140 mm w-axis: 903 mm b-axis: 225 ° bar material dia.: 61 mm Rapid Travel X / Y / Z-Achse: 30/26/30 m/min 2nd Spindle:: c-axis: 0,0001 ° power capacity: 11 kW spindle turning speed range: 5000 U/min milling spindle: spindle turning speed range: 12000 U/min spindle motor: 5,5 kW total power requirement: 45,6 kVA weight of the machine ca.: 7,7 t dimensions of the machine ca.: 3,1 x 2,495 x 2,5 m 5-axis simultaneous machining - CNC control Mazatrol Matrix 2 - Main & counter spindle - 9-position tool turret - Tool changer (20-fold) - Capto C6 milling spindle - Coolant system IKZ 20bar - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech ...

CACCIA HOT & COLD TURBOMIXER, Type CP1000, Hot mixer capacity 1.000 lt, 203 kw a.c.drive, + 1 CACCIA AG 3000, cooling unit, capacity 3.000 lt., installed power - used power in work: about 60-65% : 203 kw, availability: 3 weeks, capacity: 1000 hoìt -3000 cold, conditions: reconditioned, type: for PVC

Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)

We offer you the following for purchase here: Item number: 4969 Beckhoff CPPC 7112-1007 Beckhoff PC Monitor with Stainless Steel Keyboard Beckhoff CPPC 7112-1007 Beckhoff PC Monitor with stainless steel keyboard Motherboard: Boser HS6237 SBC CPU: Intel Celeron Memory: 128 MB SDRAM Slot 1: Slotplate with USB ports and DVI-port Ivisuqoho Slot 2: Boser SBC-V2.2B Slot 3: Slotplate with COM 1 and COM 2 Slot 4: Slotplate with LPT 1 Harddisk: Toshiba MK2023GAS, 20GB CD ROM: Teac 235HF 1.44MB A: Display: 15 inch Toshiba LTM 15C428S The monitor does not include a touchscreen. Touchpad: Glidepoint on PS/2 Ports: KT 7000 on PS/2 Power supply: 24V Dc Lodk Rqeu Ef Rqefcushi Item condition: used More PC monitors - new and used - can be found in our shop! International shipping costs on request!

Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg