127,269 used machines on RESALE, but how to find them? Machine Search
A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible.
A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible.
A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On ...
pressure: 100 t throat: - mm stroke: 8 - 116 mm total power requirement: 8 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Stroke adjustment 8-116 mm, stroke rate 65/min, ram adjustment 80mm, Space requirement2.1x 1.7 x 3.1 m, Weight approx. 7500 kg Stand tiltable, 10°/20°/30° Working area: table 800 x 560 Drive: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
pressure: - t diameter: 3 mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 1,5 x 2 m rivetting machine Workspace: Ø 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 300 mm grinding length: 1000 mm centre height: 150 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5 x 3 x 2,2 m No. 4959 Universal cylindrical grinding machine STÖCKEL RSU 100 NC-T Working area: approx. Ø 300 x 1000 Drive: 4/1 kW Electronic handwheel Internal grinding device Coolant device with magnetic separator documentation External grinding spindle Wheel Ø 400 x 50 / 250 x 30 mm 4 kW / max. 1400 mi-1 Internal grinding spindle 1 kW / max. 1400 min-1 Swivel range: - Table : -6° / +10° - Grinding headstock 180° - Workpiece headstock -90° Space requirement approx. 5 x 3 x 2.2 m Transport dimensions approx. 6LM Weight approx. 5.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/min drive motor: Antrieb durch Maschine kW distance spindle - column: ca. 800 mm total power requirement: - kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 0,8 m No. 4896: Vertical milling head SK 40 Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 ) Support bearing 2 set of bevel gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bearing diameter: Ø 380 - 1030 mm weight max. in kg: 1400 kg Dimensions (L/W/H): 3000 3000 mm weight: 1500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mm throat: 1050 / 485 mm workpiece height: 300 mm saw band length: 3920 - 4050 mm cutting speed: 15 - 940 m/min table height: 1040 mm table surface area: 750 x 800 mm Table tiltable: 15 Grad total power requirement: 4,0 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 2100 x 1000 x 2100 mm - Fully automatic miter band saw - MAC 90 control - Saw feed infinitely adjustable via precision throttle - Infinitely adjustable clamping pressure - Infinitely variable speed adjustment of the saw band - hydraulic bundle clamping - chip conveyor - Cooling device - Micro dosing device - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t stroke: 380 mm table surface area: Arbeitsbreite 1100 mm pressure: 258 bar oil volume: 46 dm³ ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 1 t clamping width: 810 mm Colour: 7016 RAL length: 1210 mm width: 810 mm height: 590 mm gear diameter: 175 mm dimensions of the machine ca.: 1370 x 840 x 605 mm Robust pallet trolley for the safe and easy transport of pallets in workshops, warehouses or factories -Made in Germany. - Four catch corners prevent the load from slipping during transport. - The pallet chassis is easy to move thanks to the castors maneuver. The transport can be carried out with low rolling resistance will. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...
pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...
control: SIEMENS 810D turning diameter over bed: 1000 mm centre height: 500 mm centre distance: 2000 mm turning dia. over face-slide: 700 mm spindle bore: 128 mm spindle taper ISO: DIN55027/11 spindle turning speed - stepless: 6.4-1600 U/min tailstock quill taper MT: 6 diameter of quill: 125 mm quill stroke: 280 mm feed - longitudinal/cross: 5000/4000 mm/min rapid traverse longitudinal and cross: 10/5 m/min dimensions of machine: 5600 x 2600 x 2800 mm weight: 9.1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 175 mm centre distance: 1000 mm grinding wheel dia. x width: 400 x 50 / 225 x 20 mm grinding wheel hole diameter: 127 / 76.2 mm grinding wheel turining speeds: 1500-2200 U/min cross slide - travel: 245 mm workpiece spindle head:: turning speed range - stepless: 6-600 U/min spindle cone MT: 5 tailstock quill taper MT: 3 max. angular position of the table: +/- 8 ° weight of the machine ca.: 3.1 t dimensions of the machine ca.: 2.85 x 1.75 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
with CNC-path-control: HEIDENHAIN type: iTNC 530 for axes: 3 x-travel: 1020 mm y-travel: 560 mm z-travel: 600 mm table surface area: 1000x560 mm table load: 1.35 t tool magazin:: numbers of tools: 40 max. tool diameter: 76 mm max. tool-dia with free toolbox: 125 mm max. tool length: 305 mm max. tool weight: 7 kg milling head: spindle taper:: SK40 spindle turning speed - stepless: 100-10000 U/min Power: 12/18 KW feeds -stepless-: 16000 mm/min rapid motion -longitudinal/cross/vertical: 40 m/min dimensions of the machine ca.: 3x2.3x2.6 m weight of the machine ca.: 6.8 t 3D measuring tracer: RENISHAW OMP40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 2 bore capacity in steel (diameter): 10 mm bore stroke: 100 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.67 x 0.62 x 1.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mm plate length: 1000 mm Punching capacity: 28 to weight of the machine ca.: 11.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1020 mm y-travel: 540 mm z-travel: 540 mm table-size: 1120x540 mm spindle taper:: BT40 spindle turning speed range: -8000 U/min tool change unit: 24x weight of the machine ca.: 5.2 t SIEMENS 810D Shopmill With NC dividing head HEIDENHAIN TS27 Measuring system HEIDENHAIN MP12 Measuring probe Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 650 mm grinding width: 300 mm max distance spindle center to table surface: 550 mm cross travel: 310 mm longitudinal feed: 700 mm weight of the machine ca.: 1.8 t dimensions of the machine ca.: 3.0 x 1.87 x 1.9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table-size: Breite: 800 mm table-size: Tiefe: 350 mm workpiece height: mm Dimensions (L/W/H): 4600 x 3200 x 2500 mm weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.
Paste mixer Brand: MTI Type: P-10ADO Power: usable volume 11 litres, nominal volume 15 l Technical specifications : The paste mixer is suitable for mixing, homogenizing, dispersing and suspending low to high viscosity products, Externally heated up to 65 °C and vacuum-proof Heating cooling jacket 5 bar Product space 0.75
x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 50 - 2600 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 5,5 kW weight of the machine ca.: 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW
centre height: 100 mm weight of the machine ca.: 30 kg dimensions: 300 x 250 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number 006 Iveco generator set Generator mecc old Type: ECO 34-2s/4 Power: 100 KVA Hz 50 RPM 1500 AVR Control: MX 341 IP 22 Year of construction 2000 We estimate operating hours to be less than 500 hours Metrics: L: 2.35m W: 1.15m H: 1.45m Weight: 1200 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Suitable for extracting oil mist., Nominal volume flow: 950 m³/h, noise level: 71 dB (A), number of revolutions: 2850 rpm, Dimensions W x D x H approx.: 525 x 592 x 781 mm, Weight approx.: 55 kg, Connected load approx.: 0.75 kW (400 V / 50 Hz),, colour: Grey
Paper drill Hang 106DTK4, machine number 62407, in good condition, immediately available
Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Weighing unit with 10 weighing heads (large hoppers for bulky products) for very precise weigh checking, with 5.5-Liter volume each. Special design for salad or similar products: dimpled surface, adjustable rotating top cone and stronger linear feeder, stagger dump, washdown construction. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | weighing range: 10-5000g, accuracy: +/- 0.5-2.0g | touchscreen (large version) operation | stainless steel | 220V, 2.0kW | L1900xW1266xH1900 | 700/750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times fro ...
Weighing unit with 10 weighing heads (springless hoppers) for very precise weigh checking, with 4.0-Liter volume each. Special design for wet environments and/or products or where a frequent washing of the machine is required (Salads, pet food, frozen food up to 150mm, non food, etc). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | weighing range: 10-3000g, accuracy: +/- 0.5-2.0g | touchscreen (large version) operation | stainless steel | 220V, 2.0kW | L1906xW1266xH1603 | 700/750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from ap ...
Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 2.5-Liter volume each. Special design to allow high speed operation, stronger stagger dump function to avoid jams, individual control of each linear feeder, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | weighing range: 10-3000g | accuracy +/-0.1-2.0g | touchscreen (large version) operation | stagger dump | double door hopper to allow faster dropping | stainless steel | 220V, 1.5kW | L1436xW1086xH1258 | 500/550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very shor ...
Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 2.5-Liter volume each. Special design to suit pasta (up to 300mm length) and pasta like products | reversible vibration motor and rotating pole between every two linear feeder pans to allows completely drop onto linear feeder pans. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | weighing range: 10-3000g | accuracy +/-0.1-2.0g | touchscreen operation | stagger dump | double door hopper to allow faster dropping | stainless steel | 220V, 1.5kW | L1600xW1136xH1484 | 600/650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available ...
Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 2.5-Liter volume each. Special design to suit stick shaped products | reversible vibration motor and V-shaped feeder allows control of product movement. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | weighing range: 10-1000g | accuracy +/-0.1-2.0g | touchscreen operation | stagger dump | double door hopper to allow faster dropping | stainless steel | 220V, 1.5kW | L1436XW1086XH1388 | 600/650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from app ...
Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 2.5-Liter volume each. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | weighing range: 10-3000g | accuracy +/-0.1-2.0g | touchscreen operation | stagger dump | double door hopper to allow faster dropping of larger sized granulate like products | stainless steel | 220V, 1.5kW | L1600xW1136xH1484 | 500/550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All ...
Multihead weigher with 10 weighing heads (containers) for fast and very precise weighing operations. Due to protection class IP66 especially for products where the machine has to be cleaned frequently (e.g. frozen or deep-frozen food). Double door hopper to allow faster dropping. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | weight range: 15-3000g | volume per hopper: 2.5L | accuracy: +/-0.5-2.0g | touch screen operation (large version) | stainless steel | 220V, 1.5kW | machine dimensions: L1500xW1120xH1400mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All ...
Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 1.3-Liter volume each. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | weighing range: 10-3000g | accuracy: +/-0.1-2.0g | touchscreen operation | stagger dump | stainless steel | 220V, 1.5kW | L1436xW1086xH1258mm | 400/450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Multihead weigher with 10 weighing heads (containers) for fast and very precise weighing operations. Due to protection class IP66 especially for products where the machine has to be cleaned frequently (e.g. frozen or deep-frozen food). - Specifications: max. speed of the machine in neutral: 70 cycles/minute | weight range: 15-3000g | volume per hopper: 1.6L | accuracy: +/-0.5-2.0g | touch screen operation (large version) | stainless steel | 220V, 1.5kW | machine dimensions: L1500xW1120xH1400mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 0.8-Liter volume each. - Specifications: accuracy: +/- 0.3-0.8g | max. speed of the machine in neutral: 70 cycles/minute | suitable for weights of 15-300g | stainless steel | 220V, 1.5kW | dimensions and weight: L1336xW930xH1146mm, 400/500kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 1.0-Liter volume each. - Specifications: accuracy: +/- 0.5-1.5g | max. speed of the machine in neutral: 70 cycles/minute | product contacting parts: stainless steel | chassis parts: painted steel | 220V/1.5kW | dimensions and weight: L970xW950xH1257mm, 250/300kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 45-90mm | bottle height: 75-240mm | sorting speed: max. 100 bottles/min | machine stops automatically when the bottles are jammed due to photocell | MITSUBISHI PLC, WEVIEW touchscreen, OPTEX photocell, SCHNEIDER frequency converter | Frame of stainless steel (SS304) | compressed air: 6-8bar | power: 220V, 2kW | machine dimensions: L2600xW1500xH1500mm. Optional: different unscramble trays for different bottle sizes. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machine ...
Stand-Alone Paste Filling machine to fill viscous substances in cans, containers, etc. Suitable for various viscous substances e.g.: pastes, creams, ointments. Manual operation via footswitch or automatic filling at set speed. Can be used with included hopper or by suck the liquid from a separate tank through a pipe. Filler moves from bottom to top of container during the filling process. - Specifications: acuraccy: +/- 0,5% | max. speed of the machine in neutral: 30 cycles/minute | stainless steel version | power: 220V, max. 1.0kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machin ...
Stand-alone Auger Filler with weight feedback via load cell and dual speed filling (fast volume filling and then slow accurracy top up), including pneumatic flap to stop product after filling and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: Hopper volume: 70 liter | filling weight: 100-10.000g | Stainless steel version with servo motor | packing accuracy:
Stand-alone Auger Filler Desktop Version with PLC controlled with Touch Screen.Quick and easy programing with check weighing by customers separate weigher. - Specification: hopper volume: 8 liter | filling weight: 2-100g | Stainless steel version with servo motor | packing accuracy: 0,3-1% (depending on product and total weight). Packaging speed 30 cycles/minute | power: 220V, 0.4kW | machine dimensions: L720xW555xH990mm | weight: 80kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Bulk Bag unloading system. INCLUDING lifting crane (HITACHI), stainless steel version and INCLUDING screw conveyor (capacity 8-10t/h) | max. bulk bag size: L1200xW1200xH1100mm | 380V, 2kW | electric chain block speed: 10.05m/min | lifting speed: 6.8m/min | Machine dimensions: L3200xW1700xH5000mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
maximum number of results exceeded
please refine your search
