fischer krecke 10 used for sale

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

CONTROLS   PLC SIEMENS S7-400 PRESS DESIGN   drive system: hydraulic   number of suspensions: 1   slide ejectors / cushion: no   table cushion: no   opening in table: no   feedstock transport direction: back-front PRESS FORCES   total force (nominal): 1000 to PRESS TABLE   table surface (left-right): 2066 mm   table surface (front-back): 2000 mm   height above floor level: 630 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 600 mm/s   working velocity min.: 15 mm/s   working velocity max.: 40 mm/s   return velocity max.: 390 mm/s   return force: 100 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1710 mm   distance table - slide max.: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 160 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   height abov ...

PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 60 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 470 mm   lower table (front-back): 470 mm   upper table (left-right): 500 mm   upper table (front-back): 470 mm   shut height max.: 277 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 180 mm ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1950 mm   space requiremen ...

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch                200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device (circulating air) with heat recovery 5 heating elements each 9 kW driven roller conveyor

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

The scope of delivery includes: 01x Stand protector, used Manufacturer: Nedcon Material color: blue Drhw0R Total height: approx. 900 mm Stand protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg size: approx. 65 x 65 mm Height deflector: approx. 50 mm Drill hole spacing: approx. 60 mm Drill hole diameter: approx. 11 mm suitable for frame profile width: 100 mm including mounting material composed of: 04x Hexagon Bolt M 10 x 35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately d ...

Harrison M400 Ø 430 x 1000 mm Distance between centers: 1000 mm Swing over bed: 430 mm Swing over cross-slide: 254 mm Diametre of main spindle bore: 65 mm Power on main spindle: 7,5 kW Number of speeds: 10 > 2000 rpm Length: 2740 mm Width : 1000 mm Height: 1270 mm Weight: 2 ton

turning diameter: 1000 mm turning length: 4000 mm turning diameter over bed slide: 680 turning speeds: 0 - 1400 U/min control: Siemens 810 D tool turret - number of stations: 2 centre distance: 4000 mm drive motor: 30/37 kW Torque: 4140 Nm bed width: 550 mm max. workpiece weight between centres: 4800 kg max.workpiece weight:each extra steadyrest: 700 kg spindle diameter in front bearing: 150 mm spindle bore: 104 mm total power requirement: - kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7 x 2,8 x 2,16 m equipped with: - CNC control Siemens 810D ShopTurn - jaw chuck - steady rest - 2-fold steel holder 23500h switch-on hours, 9300h spindle running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1994 1 pipe reactive law equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

Manufacturer: KUKA Model: KR 100-2 PA Year of Manufacture: 2009 Weight: 1240 KG Work Area Dimensions: - A: 2,180 mm - B: 3,037 mm - C: 3,200 mm - D: 2,160 mm - E: 1,040 mm - F: 1,350 mm Total Volume: 72.7 m³ Techincal Details: - Maximum Reach: 3,200 mm - Payload Capacity: 100 kg - Additional Load on Arm/Swing/Carousel: 50 kg / ~200 kg - Maximum Arm & Swing Load: 50 kg - Total Maximum Load Capacity: 350 kg - Number of Axes: 4 - Mounting Position: Floor-mounted - Design: Standard - Position Repeatability: ±0.25 mm - Path Accuracy: Not specified - Controller: KUKA KRC2 Edition 2005 - Weight (Without Controller): Approx. 1,200 kg - Operating Temperature Range: +10°C to +55°C - Protection Class: IP65 (Dust & Water Resistant) - Installation Footprint: 1,006 mm × 1,006 mm - Power Supply Requirement: 13.5 kVA - Noise Level: < 75 dB

x-travel: 600 mm y-travel: 270 mm z-travel: 430 mm : 630 mm table-size: 1120 x 270 mm spindle turning speed range: 45 - 1660 U/min spindle taper: SK 40 control: konventionell spindle motor: 2,2 kW total power requirement: 2,4 KVA weight of the machine ca.: 1,35 t dimensions: 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990

Manufacturer: Stöber Frequenzumrichter, Type: 1040B, Serial number: 1073873/791,

Manufacturer: Stöber Umrichter, Type: 1040 B, Serial number: 1172564/894,

Manufacturer: Transporband 1000 X 780 mm, Working length mm: 1000, Working widht mm: 780, Total hight mm: 920, Total power kW: 0,7,

Manufacturer: Biesse, Type: Selco EB 108, Year: 2008, Program: Selco Optiplaning, Optimisation: Selco Osi Plus, Max plate format mm: 4200 X 2200, Saw blade protrusion: 107, Cutting lenght mm: 4200, Working hight mm: 95, Vorschub Sägewagen : 100, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 400, Säge verstellbar über Steuerung: yes, Number of clamping tools: 9, Main motor kW: 13,5, Feeding speed continous adjustable: yes, Feeding from front side: yes, Feeding speed continous adjustable: yes, Year :2008

Manufacturer: Biesse , Type: Skipper 100, Year: 2005, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2005

Manufacturer: Pilz Netzteil C-P8-E Enstörfilter Eingabe, Type: 24 volt 10ms, Model: 3069100,

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Serial number: 02751,

Manufacturer: NUM , Type: 1040 W1, Model: 139241, Year: 2000, Year :2000

Hersteller : Hitachi Umrichter, Type: L 100, Card number: 463PT19123, Free text 1: Input 50/60 Hz , Free text 2: 200-240 Volt, Free text 3: 16 Ampere,

Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007

Manufacturer: Böhl Wickelmaschine, Type: Meister S 100 +FM, Year: 2005, Control: ESA, Work piece width min-max mm: 300-850, Min.-max. workpiece length in mm: 1500, Min.-max. workpiece height in mm: 50-500, Belt conveyor: 6 Meter vorlegeband, Ausrichtstation: yes, Width:165 to 250 mm: yes, Automatic product recording: yes, Belt tension adjustable: yes, Function repeat: yes, Min. cycle rate: 4, Feeding belt L x W x H mm: 2500, Year :2005

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014

Hersteller : Homag Floppy, Spare part from machine: Einschub Floppy, Type: HD SCSI 10TE CPU 30, Serial number: 2-083-03-0045,

Manufacturer: Stöber, Type: FBW 1060 X, Serial number: 20922/392, mH/Hz: 100 Hz, Power Output: 3 x 220,

Manufacturer: Stöber Umrichter, Type: 1040 B, Serial number: 1164833/794,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/B, Serial number: 794, Serial number: 1167218,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/B-1, Serial number: 1292, Power Output: 1,5 KVA,

Manufacturer: Stöber Umrichter 1070, Type: 1070 B, Serial number: 1119158/1292,

Manufacturer: Stöber Umrichter, Type: FDS 1030 B, Serial number: 67825, Serial number: 1163144,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/1, Serial number: 0193, Power Output: 1,5 KVA,

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 794, Systemconfiguration: 1167218,

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 1167218/794,

Manufacturer: Stöber Frequenzumrichter, Type: 1040B, Serial number: 1108181/992, Power Output: 4kVA,

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Manufacturer: Haffner , Type: SL 100, Year: ca.1980, Work piece width min-max mm: 550-1050, Face plate aggregate: yes, Key hole boring aggregate: yes, Clamping hight max. mm: 1050, Trench deepth max mm: 150, Trench lenght max mm: 315, Vertikal spindles: 1, Horizontal spindles: 1, Milling chain motor Kw: ca.1,0, Milling widths stop system: 315, Total power kW: 1,5, Lifting device: Pneumatisch, Year :ca.1980

Manufacturer: Num Güttinger, Type: 1060 W, Seriennummer: 134457, war verbaut inMaschine: BP 195, Zustand: gut, Standort 32469 Petershagen: yes, FREE TEXT: Verfügbar sofort,

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1, Frequenzumrichter: yes, Motor: MAC 112C-ED-HC, Current (A): 100/100,

Manufacturer: Indramat, Type: MOD 3/1 X 003-334<CRLF>KDS 1.1 100-300-W1/220, Produktionsnummer: 237-787 B 12.065, Frequenzumrichter: yes,

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Modell: 3/1x110-006, Seriennummer: 02758, Current (A): 100/25, Operating rpm: 3500/Ma0.025V/8, Gebraucht: yes,

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,