fischer krecke 10 used for sale

Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg

Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

GENERAL Project No.: 905670 Quantity: 1 pcs. Manufacturer: TACCHELLA Type: Elektra 1018 MPC Control: MPC Year of Make: 1999 Condition: Used machine Layers approx.: less than 1 layer DESCRIPTION CYLINDRICAL GRINDING Max. grinding diameter 350 mm Max. grinding length 1000 mm Center height 180 mm Center width 1000 mm GRINDING SPINDLE UNIT Travel in X/Z 350/1180 mm Max. rapid traverse speed in X/Z 10/10 m/min Grinding headstock can be swivelled manually Belt-driven grinding spindle for external grinding wheel right with max. diameter x width x bore 400x50x127 mm left with max. diameter x width x bore 450x80x203 mm Max. circumferential speed 35 m/s2 Max. power at ED 10-40/100% 7.5 kW Mounting MK5/ASA4 TAILSTOCK Tailstock can be moved manually Tailstock quill holder MK4 Cylinder Fine Adjustment Tailstock Manual Dresser with dressing tile on tailstoc ...

Reference ID PP-42880 Category Flatbed Die Cutter Manufacturer Bobst Model SPrintera 106 PER Year Built 2003 Color- Impression- Working Hours - Speed 12000 sheets/h Max. size 106 x 76 cm Condition Good Location Europe Availability December 2024 Machine Description Paper : min. 70 g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Non Stop feeder and delivery 2x Stripping Powder register is new 2024 New controls Fully automatic feeders Semi-automatic delivery units

Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Transport belt, belt conveyor -Speed: 6 m/min -Conveyor belt width: 130 mm -Conveyor belt length: 1020 mm -Motor/Transmission: 0.18 kW -Dimensions: 1020/335/H285 mm -Weight: 19 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt roller: Transport roller -Roll: Ø 100 x 1800 mm -Shaft: Ø 23 x 200 mm -Quantity: 3x transport rollers available -Price: per piece -Dimensions: Ø 100 x 2200 mm -Weight: 13 kg/pc.

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines for: noise dampening and absorption of small vibrations -Size: DN 100 -Number: 2x available -Price: per piece

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 260 x 1000 mm -T slots: 16 mm

hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg

Food shelf, kitchen shelf, catering shelf -Dimensions: 1060/650/H1760 mm -Shelf spacing: 370 mm -Material: Aluminum -Weight: 42 kg

Hoe, transport wagon -Material: entirely made of 4301 stainless steel -Dimensions: 1100/1000/H780 mm -Intermediate dimension: 85 mm -Weight: 41 kg

Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate -Weight: 1050 kg

Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Waste oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Weight: 30 kg

Power trowel, concrete trowel, screed trowel -without a flat iron -Weight: 60 kg

Replacement motor for geared motor, electric motor, three-phase motor -Speed: 1400 rpm -Power: 2.8 kW -Design: B14 -Brake -Shaft diameter: 20 mm toothed -Protection class: IP 54 -Weight: 35 kg

adjustable gearbox, variable speed gearbox -adjustable -Design: B5 -Angle gear ratio: 1:15 -Inlet shaft diameter: 19 mm -Output shaft diameter: 25 mm hollow shaft -Weight: 26 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 460/310/H160 mm -Weight: 50 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Movitrac: 204 xv -Power: 4 kW -U: 400 VAC -F: 25 kHz -I: 10 A Ac -P: 4 kW -Dimensions: 130/350/H210 mm -Weight: 7 kg

Contactor, semiconductor contactor, contactor -Type: B 105 -Power: 220 V AC 22 kW -Quantity: 3 pieces available -Price: per piece -Weight per package: 3 kg

NH fuse switch disconnector -660 V AC VDE 0660 -IEC 408 AC 23/500 V -Dimensions: 100/670/H280 mm -Weight: 8 kg

Reflective light barrier, light barrier -10-30 V DC 100 mA -Range: 20-130mm Price: per piece -Quantity: 4x Available -Weight: 0.2 kg

Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile shelving unit, tray trolley, embroidery trolley -Width: 1010 mm -Depth: 690 mm -Height: 1600 mm -Number of subjects: 36 -Material: Stainless steel -Sheet width: 460 mm -Quantity: 1 piece available -Weight: 45 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Capacity: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg

geared motor, electric motor -Speed: 30 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 9 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Dimensions: 1000/600/H400 mm -Groove: 45 mm -Weight: 700 kg

Plastic chain conveyor, conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt width: 700 mm -Length: 1000 mm -Speed: 9.1 m/min -Dimensions: 1100/1000/H200 mm -Weight: 136 kg

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines: for noise dampening and absorption of small vibrations -Size: DN100 -Nominal pressure: 6 bar -Width: 550 mm -Weight: 17.5 kg

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines: for noise reduction and absorption of small vibrations -Size: DN100 -Width: 320 mm -Weight: 9.8 kg

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel -Clear diameter: 240 mm -Width: 390 mm -Number: 2x dampers available -Price: per piece -Weight: 15.2 kg/piece

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 10 bar -Quantity: 6 available Price: per package -Weight: 0.5 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 4 bar -Quantity: 6 available Price: per package -Weight: 0.6 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 6 bar -Quantity: 2 available Price: per package -Weight: 0.6 kg

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...

We offer you a sand classifier / sand separator from MEVA. - Type: SKS 100 E - Year of construction: 2003 - Integrated ventilation

bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,51,61,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

System for filling 10 liter PET canisters. The canisters are filled onto two platform scales. Automatic fine weighing and shutdown. Compressed air operated

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 2.5 bar -Quantity: 2 available Price: per package -Weight: 1 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 4 bar -Quantity: 2 available Price: per package -Weight: 0.8 kg

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request

Starter Delko-Remy -Voltage: 12 V -Type: 10479628 -Teeth: 10 -Weight: 11 kg

Screw clamps, pipe clamps, pipe fixings -Size: Ø 108 to Ø 114 mm Price: per package -Number: 4 packages available -Weight per package: 5 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Quantity: 1 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Machine type: Vacuum dough divider Model: VD 100-700 The dough dividing machine is the latest system of dough processing technology Cut the dough to the required weight without pressing and damaging it All surfaces that come in contact with the test are made of stainless steel Weight range: from 100gr to 700gr Capacity: 1800 - 2400 pieces per hour Dimensions: 1370/1780 x 650 x 1600 mm Weight: 420kg Electrical power: 1.75kW