133,529 used machines on RESALE, but how to find them? Machine Search
Key data: 195 KW, 2300 1/min
Used diesel engine Deutz BF6M1013 MC identical to: Volvo Penta D7C-B TA
Key data: 89 KW, 1900 1/min
Diesel engine used, with gearbox ZF220 1.5:1 reduced Volvo Penta D5A-B TA identical to Deutz BF4M1013
Key data: 38 KW, 2100 1/min
Scania DC13-313A AT engine completely overhauled only in exchange on request with starter, light nose + belt drive. Engine is completely overhauled ready for installation with 12 months warranty. Old engine must come back to us within 14 days without breakage, cracks and repairable.
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 260 mm, 520 mm, 16 U/min
mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...
Key data: 625 KW, 2 1/min
2x Jenbacher gas engines JMS 312 built in 2008, with brand new generator, exhaust gas heat exchanger next to the engine, additional oil tank. No NOX control. Modules are stored and preserved, location Schleswig, Holstein, modules immediately available, ideal as exchange modules in the event of inspections or fire damage.
Key data: 400 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder
Key data: 340 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes
Key data: 400 mm
Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets
Key data: 460 mm
Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added
approx. 17 kw/23 hp 2-cylinder diesel engine, water-cooled, complete engine with starter, alternator and gear hydraulic pump. Also available: Isuzu 3 AB 1 – B 02, 3 cyl., 25 kw/34 hp as well as various parts ex Isuzu 3 KC1 Diesel engines 1-6 cyl., various makes: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Output from 4.5 – 100 kw, used, partly as good as new.
6x Containerized Guascor/Siemens G-86EM • Engine; Siemens G-86EM • Year of Construction; 2021 • Operation hours; 12,000 • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 45,7% • Voltage; 690V • Speed; 1.500 RPM • Frequency; 50Hz
Key data: 1176 KW, 1650 1/min
This marine propulsion engine lacks a connecting rod, piston and liner A cylinder head and a turbocharger is damaged
Key data: 800 KW
Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale
MAN 18V51/60 new spare parts Brand new with 0 hours 18.900 Kw at 514 RPM Year of make 2019 Following spare parts available: 18 new pistons complete available 18 new cylinder heads complete available 18 new connecting rods complete available suitable for MAN 48/60 18 new liners available New Std sized crankshaft available suitable for MAN 18V48/60 18 new fuel pumps available 18 new Fuel Injection Valve Complete With Injection Nozzle available 1 new turbocharger available 18 new camshaft piece available
Key data: 2000 KW, 750 1/min
Make: MaK Four-stroke marine main diesel engine, to drive a propeller (2 CPP-rudder propeller) Model: 6M25C Built year: 2015 Condition: New / Unused Rated Output: 2000 kW at 750 rpm Design: 6 cylinders in line, IMO II 2 counter-clockwise rotation non-reversible. Compressed - air starting suitable for operation with gas oil max viscosity: 7 cST/40 c
; Power [PS]: 245; Gross weight [kg]: 1100; Engine: CATERPILLAR C6.6; Engine displacement [cm³]: 6600
Key data: 750 KW, 1500 1/min
MWM Engine TBD602-V16 Diesel engine from 1980, 1 available 750 KW x 1,500 rpm Manufacturer: MWM Model No.: TBD602-V16 Type: Diesel Engine Serial Number: 80 79 53 Power [KW]: 750 Year of Make: 1980 Operating hours: unknown Total weight [kg]: 10,000
maximum number of results exceeded
please refine your search
