fini used for sale

Technical data for the pallet racking system: Shelving system: Redirack Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 13,235 mm Number of shelves per row of shelves: 04 pcs. á 3,205 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 05x Pallet rack stand, used Material colour: sendzimir galvanized Frame type: H250 Profile dimensions: 82.6 x 85 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 6,610 mm high 1,200 mm deep 32x Pallet rack trusses, used Material color: yellow Box profile: 120 x 50 mm Clear width: 3,205 mm max. load per pair of trusses 2,575 kg, with the same weight. Distributed Load 64x Locking pins, used Material colour: sendzimir galvanized To secure the ...

Technical data for the pallet racking system: Shelving system: Redirack Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 111,875 mm Number of shelves per row of shelves: 34 pieces á 3,205 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 35x Pallet rack stand, used Material colour: sendzimir galvanized Frame type: H250 Profile dimensions: 82.6 x 85 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 6,610 mm high 1,200 mm deep 232x Pallet rack trusses, used Material color: yellow Box profile: 120 x 50 mm Clear width: 3,205 mm max. load per pair of trusses 2,575 kg, with the same weight. Distributed Load 464x Locking pins, used Material colour: sendzimir galvanized To secur ...

work piece width: 1500 mm plate thickness: 0,8 - 100 mm Brush width: 490 mm Brush diameter: 200 mm immersion travel: ca. 1.5 - 2.0 mm grinding speed: 200 - 1200 U/min band speed: 0,8 - 4.0 m/min work height max.: 950 mm Required air-pressure: 5.0 bar Air consumption: 80.0 l/min. number of brushing / polishing units: 8 Stück Control: NC Touch voltage: 400 V total power requirement: ca. 40.0 kW weight of the machine ca.: 6.100 kg. dimensions of the machine ca.: 3700 x 2750 x 2080 mm Well maintained condition with lots of accessories New price including accessories approx. 180.000 euros Special price on request Furnishing : - ERNST dry wide belt sanding machine TYP ATLAS ER ROTOR” Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen Control of the entire system graphically supported color terminal Adjustme ...

Technical data for the pallet racking system: Shelving system: Redirack Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 13,455 mm Number of shelves per row of shelves: 04 pcs. á 3,260 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 05x Pallet rack stand, used Material colour: sendzimir galvanized Frame type: H250 Profile dimensions: 82.6 x 85 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 6,610 mm high 800 mm deep 32x Pallet rack trusses, used Material color: orange Box profile: 130 x 50 mm Design: Head truss Clear width: 3,260 mm max. load per pair of trusses 2,500 kg, with the same weight. Distributed Load 64x Locking pins, used Material colour: sendzimir galvani ...

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Size: A3+A4 Equipments: Ideal machine for finishing digitally manufactured printed matter. Plockmatic SR 90 booklet maker with TR 90 trimmer and BF 90 squarefold. Max 20 sheets of 80 grams. Cover up to 240 grams. Fully automatic folding / stitching machine for the standard sizes A4 and A3. All intermediate formats can be programmed.

Used DMG Microset ECO 210 tool presetter system for sale. Available at our machine tool warehouse at 50720 Zaragoza Spain for inspection and immediate delivery. The efficiency of the DMG Microset ECO 210 tool presetting machines optimizes the machining process right from the start. Helps increase the life of your tools, achieve better surface finishes and improve overall safety in your production. Tool presetting with highest precision and speed. Its satisfies all aplication needs and offers the perfect solution for various tool sizes and machine environments The highly efficient tool presetting devices from DMG Microset are the most productive and efficient. Presetting parallel to production time leads to significative time savings: setup times are optimized and machine downtimes are significantly reduced. Improved tooling with safe, early detection of damaed toosl reduces t ...

Speed range pre-milling spindle 60 - 1000 rpm Speed range finishing spindle with V-belt 350 - 10000 rpm TOOL CARRIAGE Distance between milling cutter and stylus 450 / 350 mm Vertical movement 50 mm Movement lengths 300 mm Movement transverse 180 mm FIXED WORK TABLE 250 x 700 mm large distance to spindle nose 475 mm Movement lengthwise and transversely 300 x 200 mm max. workpiece weight 600 kg Drive power 0.9 / 1.1 kW Dimensions approx. L x W x H 1350 x 1600 x 1950 mm Weight approx. 1.5 t used, in good condition

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm Control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

NEXTROM FCL21/HS Multi-layer Cast Film Line Materials to be processed: Barrier film / Stretch film / PP film / LDPE Extruders: Number of extruders: Extruder 1: diam. 140 mm; 244 kW motor Extruder 2: diam. 140 mm; 244 kW motor Extruder 3: diam. 75 mm; 120 kW motor Extruder 4: diam. 75 mm; 120 kW motor ABB drives for the extruders 2x90mm screws for trim feeding Die: Flat die type, Cloeren, year 2016 Lip width: 2600 mm Lip gap adjustable: from xx to xxx microns Film thickness 12-35 microns Heating: 64kW + 100 pc heating elements for profile regulation Output: Up to 1000 kg/hour depending on material formulation Chill-Roller: 2700 mm wide diam. 1000mm Winder: NEXTROM Winder, fully automatic roll change  Maximum line speed 900 m/min  Reels diameter up to 500 mm  Winding width 2000 mm Accessories:  Longitudinal film cutting unit   Edge trim cutting syst ...

MachineApplications: manufacture of paving, kerbs, concrete blocks for masonry, foundation, pillars, floor slabs, chimney stacks, gutters, roadway gutter covers. 1 Advantage: Powerful vibration provided by 2 electric motors Tamper head equipped with 2 vibration motorsSchneider Electric electrical control and command components Our wide range of moulds can ensure a diversified production. Reliable mechanical and hydraulic systems. Component parts from trusted pateners: Drive: electrical and hydraulic Operate: Mostly manual (commands executed automatically: stop vibration when reaching height, start/ stop exhaust line) Concrete mould supply: Mechanised with hydraulic control Optional equipment: ) Auxiliary equipment for the paving and kerb finishing (hopper and drawer) Production cycle automation Electrical panel with PLC + HMI + software Automatic elevator with product panels f ...

TRUMPF TruLaser 3030 laser cutting machine was built in 2009 in Germany. The machine designed for cutting workpieces made of steel or aluminium, is ideal for any production facility where precision and the quality of the manufactured parts are the highest priority. The workpieces are machined by an extremely powerful laser beam which, in combination with extensive equipment, allows for rapid cutting of thin sheets with a thickness of up to 1.5 mm. This ensures that the finished workpieces have perfectly smooth and even edges, regardless of the machined material. The offered equipment includes an easy-to-use SIEMENS SINUMERIK 840D CNC controller with 500 MB memory for NC programmes, a table with hydraulic pallet changer and three cutting heads. The TRUMPF TruLaser 3030 Basic Edition laser cutting machine weighs 10500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - max ...

Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to +45° and -60° Silent operation Heavy-duty cast design High cutting accuracy due to vibration-free operation Ball-bearing saw blade guide Chip brush Automatic shutdown of the saw a ...

automatic loader / unloader for machines working with sheet materials up to 8 mm thick, automating and accelerating production processes associated with perforation, stamping, cutting parts from a sheet, allows you to sort finished products.

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

We sell a current model of Konica Minolta AccurioPrint C750i Flux with booklet finisher. Low meter reading. The copier was under maintenance at Konica Minolta until it was dismantled and is in very good condition. Konica Minolta AccurioPrint C750i Flux with Finisher Booklet Finisher FS-539 SD, Punch Kit PK-524 and RU-519 Relay Unit. Total counter: 156,620, black: 62,867 and color: 93,753. Preferably pick-up at our warehouse in Munich. Shipping on request and assumption of costs. We have other current models from Konica Minolta: Bizhub 3622, C3300i, C250i, C360i, C450i, C550i, AccurioPrint C759 etc. Also 3x Konica Minolta Pro 1100. Ask us, we will get back to you as soon as possible.

AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in the X,Z axis: 15 m/min - ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111210 € : 2213.08 € : 730 mm : 1.200 x 500 mm : 1200 mm : 1.200 x 500 mm : max. 30 m/min : 3.7 kW : 27 kVA kW : 4600 mm : 3040 mm : 2200 mm : 6400 kg : 990 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm : 560 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 560 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 2.000 U/min : 11 kW iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm Max. table speed (X axis) 30 m/min vertical feed by ...

• For hard gelatine capsules • Output max. 120,000 capsules/h • Available formats for capsule sizes 00, 0, 0el, 1, 2, 4 • Available dosing rings for pellets/microfilm tablets and dosing station for powder/granules • Deionisation for static powders • Sample weight control by Sartorios balance, automatic operation, with control via PLC for MG2 dosing, regularly calibrated • Capsule hopper • Empty capsule sorting with lifting device for deformed capsules • Tricaps finished capsule sorting machine for deformed capsules • Bulk suction and powder feed via Volkmann vacuum devices with various suction lances for different products • Separate suction unit with side channel blowers • Only H1 and FDA lubricants from Klüber • Regular maintenance by MG2 and own personnel (monthly, ¼ yearly, yearly, by the hour) • Complete spare parts package for 4,000 h maintenance availa ...

Code: 0206 Brand: SBF STEFANI Model: WS 125 - CE Standard Automatic 2-belt calibrating sanding machine for wood, furniture, panels, doors, frames, composite materials and various - CE Standard Technical data: Max working width mm 1300 Max working height mm 160 Min working height mm 3 Sanding belt size mm 2620 Composition: 1° Calibrating unit diameter mm 275 rubber coated SH 90 - Manual roller height adjustment - Motor Hp 20 2° Sanding Finishing unit with height adjustable sanding pad - Motor Hp 15 Automatic table positioner Infeed and outfeed roller conveyor Infeed safety barrier Automatic table lift Compressed air Atm 7 Overall dimensions mm 1960 x 2700 x 2400 h

Key data: 500 mm, 400 mm, 300 mm

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

chucking diameter: 250 mm swing diameter: 265 mm travel -x axis: 170 mm control: LIEBHERR max. turning speeds: 6.000 U/min Dimensions (L x W x H): 2.950 x 1.600 x 2.360 mm weight of the machine: 8.000 kg Finish Grinding Machine | LIEBHERR - LCF 180 The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: LCF180 | LCF-180 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Petkus Pickler CT 5-25 t/h, pre-tank, finishing electr. Scales, recontainers, sliders, e-detectors, control cabinets For Sale Tel. 01715213204

SPIRO 6000V4 plasma cutting machine built in 2016 in Switzerland, performs ideally in medium and large industrial plants during the industrial production of parts made of steel sheets and non-ferrous metals. To ensure high cutting performance even during the most intensive machining, the extended work space based on a stable design allows simultaneous cutting and unloading of finished products without interrupting machine operation. The SPIRO CUTLASS 6000 plasma cutting machine is operated using the high-speed Spiro HS Controller with a complete library of parametric models and shapes. Technical specifications of the SPIRO 6000V4 plasma cutting machine - work table area (L x W): 6000 x 1500 mm - maximum workpiece thickness (galvanised steel): 6 mm - maximum workpiece thickness (black steel): 6 mm - maximum workpiece thickness (stainless steel): 6 mm - maximum workpiece thickness  ...

cross-section width:: Schläuche max. 11 mm cross-section heigth:: 11 mm feed:: 0,5 - 100.000 mm Condition: used, very good condition Specification: universal cutting machine with roller drive for hoses - small cutting machine for hoses - feed unit: roller drive - microcontroller control: 80537 - cutting unit: pneumatic - Type of cut: Blade cut - Industrial blade: for PVC hoses - Max. hose diameter: 11 mm - Maintenance unit: yes - Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length - Cutting force approx.: 500 N at 6 bar - Cutting length: 0.5 - 100,000 mm - Resolution/step change: 0.5 mm - Operating voltage: 230V, 50-60 Hz - Compressed air: 5 - 6 bar - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar - Paint finish: RAL 7035 light grey - No docum ...

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAW - unpainted - Box profile: 80 x 40 mm Truss Type: TRV1-190-084-30 CE Agraffe: 5 HK (hook) Clear width: 1,900 mm max. load per pair of trusses 2,700 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of deliv ...

The winder is part of a cast film system and is in good condition. Max. foil width = 2350 mm Max. roll width at inlet = 2600 mm, Max diameter roll = 980 mm Sleeve size 3", 6 Film thickness= 15 – 200 my, Max. speed = 250 m/min Edge trimming with razor blades, The winding can be in contact or gap Automatic loading of 3 inch sleeves from the sleeve magazine. Automatic unloading of the finished roll by means of a robot.

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2700 mm Control: AMADA AMNC II-PC throat: 415 mm stroke: 200 mm dayligth: 500 mm adjustment of the rear stops: 600 mm table width: 60 mm number of controlled axis: 7 ajustment speed: 200 mm/sec bending speed: 20 mm/sec total power requirement: 5,3 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper Medium and Large -Combi gripper (suction/gripping) for vertical loading -Dev ...

approx. 40 Plan B planks different colours and finishes 60x40x2

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: grey INP profile: 80 x 42 mm Truss type: TRV1-210-08-l Agraffe: 5 HK (hook) Clear width: 2,100 mm max. load per pair of trusses 2,400 kg, with the same weight. Distributed Load 02x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Key data: 2700 KG

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 80 x 40 mm Truss Type: TRV1-190-084-30 CE Agraffe: 5 HK (hook) Clear width: 1,900 mm max. load per pair of trusses 2,700 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place ...

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 50 mm Truss Type: TRV1-290-125-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,200 kg, with the same weight Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on th ...

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 140 x 40 mm Truss Type: TRV1-290-144-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,750 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the plac ...

turning diameter: 500 mm centre distance: 800 mm control: 840D SolutionLine Siemens swing diameter: 690 mm Main spindle:: Max. rpm: 3.200 min/-1 power capacity - main spindel: 28/35 kW Torque: 175/875 Nm spindle nose: DIN 55026 / A11 max. usable bar diameter: 110 mm C-Axis: 0,001 ° Subspindle:: Max. rpm: 4.000 min/-1 max. Torque: 95 / 113 Nm spindle nose: A6 max. usable bar diameter: 52 mm C-Axis: 0,001 ° turret:: number of toolpositions: 12 pos. tool taper: VDI 50 DIN69880 Number of driven toolspositions: 12 pos. axis stroke:: x-axis: 360 mm y-axis: 120 (-55/+65) mm z-axis: 980 mm C-Axis: 360 ° total power requirement: - kW weight of the machine ca.: 9,1 t dimensions of the machine ca.: 4,3 x 3,0 x 2,5 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 15 bar Subspindle: bar feeder interface: Turret: Tool drive mechanisum: C-axis: 2x Y-axis: hollow chuck un ...

Technical data for the pallet racking system: Shelving system: SLP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 13,600 mm Number of bays per row of shelves: 05 pieces á 2,600 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Frame Type: TC15 Profile dimensions: 100 x 80 x 1.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 5,950 mm high 750 mm deep 40x Pallet rack crossbeam, used Material color: blue Box profile: 90 x 50 mm Truss Type: RTS90 Agraffe: 3 HK (hook) Clear width: 2,600 mm max. load per pair of trusses 1,500 kg at the same weight. Distributed Load 80x locking pins, used Execution: complete galvanized To secure ...

Kustner-Sterilchoc FP cooking & sterilzation process installation, UHT in continuous mode, enabling to reach an advanced bacteriological stability and security of you finished product. Output: 250 - up to 2.000 kg/h (depending on configuration). Continuous, efficient and flexible production process which can be regulated during production. Advanced economical caloric process balance. Fully stainless steel executed construction. Minimum floor imprint. CIP cleanable. Waukesha lobe pumps, model 034 and 030, year 1999. Control panel with Siemens S5 PLC control for easy control and operation. Including pre-mix vat with 2 stainless steel augers and outfeed lobe pump (Waukesha, model 034, motor 4 kW). Working principle: after the pre-mix is added to the pre-mix vat and melting salt is added, the continuous processing takes place in 3 successive stages; 1st step: heating up to 85/90°C by satura ...

turning length: 1250 mm turning diameter over bed: 400 mm turning diameter over slide rest: 246 mm turning speed range: 15 - 2500 U/min spindle bore: 54,0 mm quill stroke: 140 mm morse taper: 4 MK feed range: 0,036 - 1,2 mm/U bed width: 318 mm work height max.: 1050 mm travel -x axis: Plan 250 mm travel -z axis: Ober 130 mm spindle nose: D1-6 Camlock total power requirement: 7,5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2500 x 1100 x 1300 mm from a training workshop good condition (!) The Colchester Triumph VS is the all-rounder”. From the heavy cutting This precision machine corresponds to the fine precision finish Requirements from modern tool construction, form construction or training company. Furnishing: - 3 -cheezing - diameter 200 mm, with replacement cheeks - Multifix steel holder, with use - Continuous speed adjustment via electric potentiometer - ...

Mazak OPTIPLEX 3015 NEO 10kW Beam Shape Laser Cutting Machine + Automation Loading and Unloading System with 8 Regall Bearing Locations CST3015 Publisher: Mazak Type: OPTIPLEX 3015 NEO 10kW Beam Shape Year of construction: 11/2022 Commissioning: 05/2013 Condition: New, Exhibition Machine Availability: Immediately, by arrangement Operating hours (as of 01.2024): – CNC Power On Time approx. 636h – Laser Power On Time approx. 287h – Auto Operation Time approx. 60h – Auto Cutting Time approx. 19h – Cutting time approx. 17h Scope of delivery complete incl. installation and commissioning (Mazak Germany): – Basic machine with laser resonator Beam Shape CFX-10000 (10kW) – Built-in nozzle camera – Conveyor belt for material scrap – Zus. Laser protection screen (side 1) – Zus. Laser protection screen (side 2) – Oil mist mist – Roller lift table (ma ...

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 800 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 1,000 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is availab ...

The scope of delivery includes: 01x Folding box / folding box, used Manufacturer: SSI Schaefer Type designation: FK 6220 Material color: blue External dimensions: 600 x 400 x 220 mm (LxWxH) Internal dimensions: 570 x 370 x 215 mm (LxWxH) Dimensions folded: 600 x 400 x 70 mm (LxWxH) Volume: 45 l Weight: 2.44 kg/pcs. Material: Polypropylene Handles: open on the front wall side Side Type: Closed Bottom Finish: Smooth, Closed It is a second-hand item, there may be scratches, dents and traces of use exist. General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery.

2011 NILPETER FA4 3 COLOURS FLEXO LABEL PRESS Very nice Nilpeter FA4 3 colours flexo press with digital unit The digital unit is not working This machine can be converted to 3 colour Flexo press or the printing units can be added to another Flexo machine. Also possible: This machine can be used as perfect varnishing and finishing machine. Manufacturer: Nilpeter Type: FA4 Year of production: 2011 Max. web width: 420 mm Max. printing width: 410 mm Machine is available immediately Please contact us for more information or pricing.

twin spindles and C axis of the Muratec brand that we have for sale, machine currently in production and inspectable while machining part, attached main Muratec MT 25 MC. 7 axis machine. Double head, twin spindles. Motorized tools, C axis. Interface for loader of bars. Short bar loader, Multifeed 1.5 meter model. Automatic cleaning of heads by means of air. Automatic parts collector. Parts conveyor belt. Extractor arm for finished parts. Pneumatic parts ejector in second operation. 18.5 KW head motors. Size heads A2-6. Step of bar 65 mm. Prismatic guides in all axes. Vdi tool clamping system. 2 arms of automatic measurement of Renishaw tools. Two kitagawa cymbals on 10-inch main headstock. Fanuc programming system. Automatic effort control and tool consumption monitor. Speed fast displacements 20 m/min. Head speed 3,500 rpm. ...

New Light Depression Gravity Filling Triblock Isobaric Filling Monoblock The displayed photos are of model 12 12 1 12 rinser 12 filling nozzles 1 capping head Low vacuum Gravity Filling Monoblock and the machine comes without a rinsing machine This new Low vacuum Gravity filling monoblock Automatic rotary system to fill flat and low density liquids The opening of the filling valve is actuated by its contact with the neck finish of the container raised by the supporting cylinder The range of configurations and options allow great flexibility of use PRODUCTION SPEED The production speed is configurable from 1 000 up to 24 000 bph FILLABLE BOTTLE TYPES Glass PET and other polymers RINSING Optional One or two treatments with fixed or dynamic nozzle CAPPING SEALING All main capping systems Cork ROPP Aluminum Screw cap Plastic screw Crown T stopper Pressure stopper etc GENERAL CHARACTERISTICS  ...