fine used for sale

CONTROLS   PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN   drive system: servomechanic   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 70 mm   stroke rate (max.): 140 /min COUNTER RAM   nominal force: 625 to   stroke: 25 mm V-RING   nominal force: 1250 to   stroke: 25 mm TOOL DIMENSIONS   lower table (left-right): 600 mm   lower table (front-back): 600 mm   upper table (left-right): 600 mm   upper table (front-back): 600 mm   shut height max.: 380 mm   ram adjustment: 125 mm STRIP-FEEDER   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step min.: 0.1 mm   feeding step max.: 300 mm   sheet length min: 2500 mm CR ...

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 15 mm V-RING   nominal force: 75 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm   distance between columns (H-frame): 560 mm   passline opening (free passage in side columns): 270 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step max.: 9 ...

CONTROLS   PLC BECKHOFF PRESS DESIGN   drive system: knuckle-joint   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 67 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 125 to V-RING   nominal force: 125 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 560 mm STRIP-FEEDER   feeder type: roll feeder DIMENSIONS / WEIGHTS   total weight approx.: 14000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

CONTROLS   electronic controls SLIDE   total force (nominal): 40 to TOOL DIMENSIONS   lower table (left-right): 280 mm   lower table (front-back): 280 mm   upper table (left-right): 280 mm   upper table (front-back): 280 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 100 mm   sheet thickness max.: 4 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1840 mm   total height: 1350 mm   total weight approx.: 2500 kg

SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 72 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 12 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 255 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 180 mm   sheet thickness max.: 5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1700 mm   space requirements -front/back-: 2420 mm   total height: 2420 mm   total weight approx.: 6000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   leveller unit: optional  ...

CONTROLS   PC controller BECKHOFF C 6140 PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 410 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 8 mm/s   working velocity max.: 80 mm/s   return velocity max.: 150 mm/s COUNTER RAM   nominal force: 120 to   stroke: 40 mm V-RING   nominal force: 250 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 820 mm   lower table (front-back): 1250 mm   upper table (left-right): 820 mm   upper table (front-back): 1250 mm   shut height max.: 410 mm STRIP-FE ...

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: link drive   feedstock transport direction: left to right SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 22 to   stroke: 8 mm V-RING   nominal force: 25 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 220 mm   ram adjustment: 80 mm   distance between columns (H-frame): 450 mm   passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 180 mm   sheet thickness max.: 5 mm &nbs ...

CONTROLS   PLC BECKHOFF SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 70 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 22 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 200 mm   sheet thickness max.: 5 mm   feeding step min.: 0 mm   feeding step max.: 999 mm   pilot release system: yes   measuring wheel: optional ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS -FINEBLANKING PRESS-   waste cutter: y ...

CONTROLS   PLC SIEMENS S7 SLIDE   total force (nominal): 250 to SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 10 mm/s   working velocity max.: 44 mm/s   return velocity max.: 200 mm/s COUNTER RAM   nominal force: 63 to V-RING   nominal force: 100 to TOOL DIMENSIONS   lower table (left-right): 500 mm   lower table (front-back): 500 mm   upper table (left-right): 695 mm   upper table (front-back): 730 mm   shut height max.: 360 mm ATTACHMENTS -FINEBLANKING PRESS-   light barrier: yes   closed cabin: yes   decoiler: optional   leveller unit: optional   waste cutter: yes   slug separator: yes

Plasma cutting system for attachment/post-training CNC cutting and plasma cutting FineFocus 800 Plus Materialstaerke: up to 80 mm, hole stitching and quality cutting up to 45 - 50 mm, Gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Special price: 19,900 EUR + VAT ex works Bochum-Wattenscheid plasma cutting plants FineFocus 800or alternatively as FineFocus 1600 cutting up to 160 mm (see systems) plasma cutting systems FineFocus 800 and FineFocus 800/TWIN now with PLUS technology preferably for automated and mechanized cutting in connection with guide machines and robots on all electrically conductive materials; with or without vortex gas, also under water. cutting range up to a maximum of 80 mm material thickness (materi ...

; mint condition, ready for use

Shipping within Germany 8.- € insured VAT not deductible

Shipping within Germany 8.- insured VAT not deductible

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The workp ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Lightly used Hosokawa Alpine Ventoplex C32V air classifier in very good conditions. Recirculation classifier perfect for fine classification of abrasive products separating a fine fraction from the coarser one to ensure a perfect top cut of the product or dedust it getting rid of undesired ultrafines. It is suited for high yields with low energy consumption. Our classifiers obtain t ...

Item condition: good Availability: immediately technical documentation: available Filling: Big Bag Mill footprint: 1800 x 1200 mm Total height of the mill: approx. 4200 mm Disassembly: included Machine is sold without screens. Application: - for grain grit (very fine) - for grain grit (fine) - for grain grit (medium fine) - for grain grit medium, breadcrumbs (fine), white bread - for grain grit coarse, breadcrumbs (medium), mixed bread - Breadcrumbs coarse, mixed bread, white bread - Wholemeal bread - Pumpernickel

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...

ID2927 Complete limestone processing plant Complete limestone processing plant consisting of: • pre-crushing plant – approx. Year of construction 1970 • Primary crusher impact mill Hazemag AP5, capacity up to 500 t/h • Secondary crusher impact mill Hazemag AP4 – approx. year of construction 1970 • Gravel plant 300-350 t/h – year approx. 1983 • Fine crusher impact crusher SBM 10/6/4 EXP – year 1993 • Fine chippings plant 350 t/h – year 1996 • with feed hopper, pusher truck feeder, roller grates, silos, screening plants, conveyor belts, dedusting, etc. • Control new in 2018, loading control new in 2020 Complete limestone processing consisting of: • Pre-crushing plant - approx. built in 1970 • Hazemag AP5 primary crusher impact mill, capacity up to 500 t/h • Secondary crusher impact mill Hazemag AP4 – approx. built in 1970 • Ballast mill  ...

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment rang ...

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

Filter combination, fine filter - ultra-fine filter combination, with mechanical maintenance indicator ULTRAFILTER AG 0002 / AG002A ultra-fine filter element SMF 02/05 121804, 1186160 activated carbon filter element AK 02/05 122104, 1182859 Working pressure: max. 16 bar Filter volume: 2x 0,, 35 l connection: R1/4 used, tested ! Dimensions: 310 x 290 x 100 mm

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...

turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...

1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER type BOWA with weigth pan, 2 TRÜTZSCHLER weighing feeder type PWSE 1200, 1 TRÜTZSCHLER Tuftmixer type FMN, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1 1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER bale opener type BO 1200, year 1999, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1, year 1999 3 TRÜTZSCHLER material reserve with trunk and condensor type MS, year 1999 1 TRÜTZSCHLER fine opener with feed trunk and condensor type FD-S, year 2004

Starting product : car and truck tyres (excluding forklift and loaders tyres) max diam. 1.200 mm, (larger tyres need pre splitting), Final product : 2-4 mm.crumbs, 1-2 mm.crumbs, 2 operators per shift, calculated on a 220 days/year 8 h/day = 1.760 T/year - 16 h/day = 3.520 T/year, Required space : about 25 x 15 mt., Harmonized steel as a residual product., Average throughput rate of granulate : 1 Ton/h (throughput rate depends on feeding rate and on the kind of tires), installed power : about 380 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - manual (20-25 tyres/h) for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.300 mm wide, transport belt, transport belt for fine material, transport belt to return oversized material to shredder, High speed granulator 1.300 mm wide rotor, extraction belt, vibrating table, Overbelt magnetic  ...

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 3 operators per shift, required space : about 30 x 22 mt., calculated on a 220 days/year 8 h/day = 3.520 T/year - 16 h/day = 7.040 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 2 Ton/h in input (throughput rate depends on feeding rate and on the kind of tires), installed power : about 650 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - available manual (20-25 tyres/h) or automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return  ...

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 4 operators per shift, required space : about 45 x 25 mt., calculated on a 220 days/year 8 h/day = 7.040 T/year - 16 h/day = 14.080 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 4Ton/h in input, (throughput rate depends on feeding rate and on the kind of tires), installed power : about 900 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return oversized material to shredder, n.2 ...

Equipments: 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt unit, type: BTK 1510-0 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, refurbished 2016 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer,

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...

Drawing blades serve as tools for the fine removal of chips, for removing old paint layers and for cleaning contaminated surfaces. Pull blades are usually not functional when purchased, but only a piece of steel sheet. In order to function, a fine ridge must first be sanded. We offer fully functional drawing blades of 0.4 mm and 0.5 mm Swedish steel for new purchases. If necessary, we will gladly grind your "used" or "new" drawing blades and let them come back to you functionally. Contact us. We would be happy to provide you with a new range of re-energised blades - ground or unground and/or a grinding offer. We would be happy to provide you with further information regarding drawing blades.

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...

Figure shows precision flat grinding machine: FSM 2550 AH Table size: 300 x 600 mm Installation height: 500 mm Max table load: 300 kg Engine power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All castings, such as machine stand, table, etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross-stroke device - Rear splash protection - Grinding wheel - Grinding wheel flange - Pulling device - Balancing mandrel - Balancing scales - Dressing diamond - Machine light - Nivilier elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic verti ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Operating hours: 39970 Technical data Centre height: 175 mm Distance between centres: 650 mm Grinding wheel right and left hand Max. Longitudinal travel: 700 mm Grinding weehl left side: Diameter: 400 mm Width: 80 mm Bore: 127 mm grinding wheel width: 80 mm Grinding wheel right side: Diameter: 400 mm Width: 40 mm Bore: 127 mm Workpiece weight on centres max.: 130 kg Grinding wheel speeds: number (steps): 6 from: 1500 rpm up to: 2400 rpm Peripheral speed: 35 m/s Hydraulic cross travel: 300 mm Angular displacement: 180 ° Work piece spindle head: speeds: stepless from: 60 rpm up to: 600 rpm rotatable: 0-90 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 12 ° Table speed: from: 0.05 m/min up to: 9.0 m/min Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor ...

Used vacuum pump, roller piston pump for the fine vacuum range, suction capacity: 250m3/h Roller piston pump for the fine vacuum range, suction capacity: 250m3/h; Final pressure: depending on the performance of the pre-vacuum pump

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 250 UPZ. This turbo mill is able to pre-cut and produce medium to fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction - product con ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 315 UPZ. This turbo mill is able to pre-cut and produce medium fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction: stainless steel  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG-R 200 fluidised bed classifier jet mill system. The AFG-R is a special variant of the standard AFG where one nozzle is placed vertically pointing upwards on the bottom of the grinding chamber to elevate all the material in the fluidised bed to the jets meeting point, specially interesting for heavy and difficult to grind materials. This machine is specially  ...

Hydraulic surface grinding machine make ZIERSCH & BALTRUSCH type Formmaster 6/30Make -No: 36BB341, year of construction 1991Technical specifications:Electromagnet Size: 600300mmMax. grinding area: 650 x 300 mmelectromechanical transverse movement:300 mmTable clamping area: 650 x 250 mmgr. Distance between table surface and center of grinding spindle: 600 mmMax. table load: 300 kgGrinding wheel dimensions :400 x 40 mmLongitudinal table movement (X-axis): 840 mmLongitudinal table movement (X-axis) hydr. continuously adjustable: 2 - 35 m/minTable traverse movement (Z-axis): 310 mmTable cross movement by hand wheel, scale division: 0.025 mm 1 revolution = feed: 5 mm Fine feed Scale division: 0.005 mmTable transverse movement (Z-axis) automatically steplessly adjustable. line feed: max. 30mm continuous: 10 - 1000 mm/minCross movement rapid traverse: 1000 mm/minVertical movement (Y-axis) hand  ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Turboplex ATP 200 air classifier for the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG 400 classifier jet mill for the ultrafine grinding of different products with a sharp top cut. This pulveriser allows the fine comminution of products in the bottom chamber of the machine. Thanks to the different nozzles, the pressurized air reduces the product size to the desired one. The top part is fitted with air classifiers that ensure the required top c ...

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

Rental unit, not for sale. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in Pharma design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for R&D and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and ...

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

Impact forming mill is used for dry and fine grinding of brittle materials with a hardness of up to 3 Mohs. the impact fine grading mill combines efficient impact grinding with efficient classification in one unit. The supplied materials are thrown into the liner by the milling tools at a speed of 60-130m/s and then shredded. the ground material is transported to the integrated cashier for processing by means of air and rotation of the grinding tool. the fineness can then be infinitely adjusted via the speed of the classifier. Particles that are too large are sorted out by classifiers and end up in the grinding zone for continuous comminution.

- Manufacturer: GEA - CFS USA - Type: OPF 1000 - Width: 1000 mm - Dimensions (L x W x H): 2700 x 2140 x 1950 mm - Adjustable speed - With turbine - Speed: 2.5 up to 25 m/min - Voltage: 480 V - Frequency: 60 Hz - Weight: 1125 kg - Product height (min): 16 mm - Product height (max): 70 mm An innovation that is easy to use. All process parameters can be adjusted from outside the machine, even during production, with a direct view of the hopper. The control panel, with a speed display, is placed at an ergonomic height. Thanks to its innovative belt drive system, the GEA OptiFlour works perfectly with seasonings, fine flour, fine and medium crumbs and sticky flours with seeds.

Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...