fin press line used for sale

Working width from to: 100-400 mm Working height from to: 20-150 mm Dimensions (L/W/H): 2200x1650x1600 mm Weight: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3960x1400x1800 mm Weight: 1200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6000x1400x1800 mm Weight: 2500 kg total power requirement: 8,05 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1650x1600 mm Weight: 1300 kg Total power requirement: 17,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1650x1600 mm Weight: 1300 kg Total power requirement: 17,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1400x1800 mm Weight: 2200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Producer Finnrose - Working width 1.400 mm - Diameter roller 65 mm - Roller pitch 100 mm - alle Rollen mit Gummioberfläche - Feed speed infinitely adjustable by hand wheel - Feed speed ca. 2 - 8 m/min - Length 3.410 mm - Voltage / HZ 400 V / 50 HZ - Location, in stock D-32825 Blomberg

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

Manufacturer: Rösler Model: F60 Motor Power: 3.3 kW / 400V / 3 phases / 50 Hz Technical Specifications: - Voltage: 400V - Frequency: 50 Hz - Power: 55 kW - Control Voltage: 24V DC - Max Current: 75 A The 2008 Rösler F60 finishing machine is part of Rösler´s line of surface finishing equipment, specializing in mass finishing processes such as deburring, polishing, cleaning, and edge radiusing for a variety of materials. Rösler, a well-known German manufacturer, focuses on advanced technology in vibratory and blast finishing, making the F60 suitable for applications across industries, including automotive, aerospace, medical devices, and general manufacturing. Key Features of the Rösler F60 Finishing Machine: - Process Type: - Vibratory Finishing: The F60 typically employs vibratory finishing, a method where parts are placed in a tub with abrasive media, which gently polishes ...

workpiece diameter: 660 mm workpiece length: 8000 mm honing/re-bore length: 7600 mm internal diameter: 50,8 - 609,6 mm stroke length max.: 7600 mm spindle motor: 29,8 kW spindle turning speed range: 0 - 300 U/min Lifting capacity: 13,5 kW stroke speed: 0 - 30,5 m/min workpiece weight: 8000 kg control: Siemens Simatic total power requirement: - kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 18,7 x 1,5 x 1,5 m Universal horizontal. Honing Machine / Long Stroke Cross Grinding Machine with servo drive and electrical feed system - Siemens Simatic (Touch) - Coolant system with paper band filter - steady rest The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: 80-120 mm Working height from to: 30-80 mm : 1200-1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible.

Inv. Num. : 9031 Type: DEF FA 85 Producer: Soco Generated: Parameters: Machining length: 25–320 mm. Diameter: 25–85 mm.

Inv. Num. : 9030 Type: EM80 Producer: ADIGE Created: 2015 Parameters: Control system: SIEMENS Switch-on hours: 37558 h Hours: 26407 h Machine weight: 8500 kg The machine is designed to process steel tubes with a length of 20–600 mm and a diameter of 20–80 mm.

vibratory feeder diameter range 3,5-10 mm total screw length 150 mm output - pieces/min 28 head dia. 24 mm max.

Pore finder, pore finder, surface tester -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg

Vibratory finishing machines Pre-filter system, filter system, pre-filter container, water filter for cylindrical vibrator, vibratory finishing machine, vibratory finishing system, vibratory finishing cylindrical vibrator, Trowal system, continuous vibrator -Pre-filter system: for vibratory finishing machines or others -Transport frame: mobile, with 2 filter inserts -Collection tank: volume approx. 350 litres -Total dimensions: 1400/620/H920 mm -Weight: 106 kg

Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible.

Working width from to: ~ 45 - 95 mm Working height from to: tba mm : 3.000 mm milling height: 130 mm Semi-automatic finger jointing line Sauter type RS for joining wooden workpieces by means of finger joints. The system is suitable for waste wood processing and for the production of extended solid wood lamellas. Including dismantling and loading. Fixed loading date: 15.06.2026. Consisting of: - Milling and gluing machine Sauter type RS-FPEL 130 - Press Sauter type RS-DKPV 6 - End length saw Sauter DAS 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible.

Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible.

Mit Lichtschranke am Ende des Bandes für Transportstop - Producer MinkDK - Length 1.700 mm - Belt with 1.220 mm - Working width 1.200 mm - Working height 900 + - 30 mm - Length 1.300 mm - FU-Regelung für Feed speed 2 - 10 m/min - Location, in stock - Voltage / HZ 230/50

Forplan Ergomag PM 3000Year of manuf. : 2023 Control : ____________Description:Technical Data:Speed (stepless):0-3.300 U/minCageload (max.):8 kgEquipment/Accessory:Partscleaning:Denios WashingtableFurther Accessory:Misc. operating materials

- Producer Aagaard Finnrose - Year of construction 2005 - Working width 1.300 mm - Gesamtbreite 1.380 mm - Rollenbahnhöhe 800 mm - Diameter roller 65 mm - Roller pitch 110 mm - alle Rollen mit Gummioberfläche - FU-Regelung für Feed speed - Angetrieben - Length 3.000 mm - Colour 7035 - Motor power 0,37 kW - Voltage / HZ 400 / 50 - Location, in stock

Lot consisting of semi-finished products: KEEPER Developments - 3845 pieces Keper Finished Molds - 240 Pieces Pedal pad dis240007 - 4024 pieces Embossed Arm M 240 sx - 639 pieces Printed Arm M240 Dx - 34 pieces Printed Arm M240 Sx - 81 pieces Printed Arm M189 Dx - 94 pieces M240 Sx reinforcement dis 240009 - 712 pieces DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Auction-ID: A7-45789-35

Manufacturer: Veit Type of Machine : Tunnel Finisher Model: 865 Year of Manufacture: 2015 Included Per Unit - Humidification chamber - Two steam chambers - Three air chambers Technical Specifications - Maximum throughput: approximately 2,500 parts per hour - Suitable for maximum garment turnover, including difficult natural fibres - Steam consumption: approximately 370 kg of steam per hour Electrical and Power - Voltage: 400 V / 50 Hz - Phases: 3N/PE - Power: 15.0 A / 9.0 kW - Branch circuit protection: 16 A Compressed Air - Max. air pressure: 6.0 bar - Connection: 1/4 inch, 6 mm - Pressure range: 4-10 bar Steam - Max. steam pressure: 8.0 bar - Testing pressure: 10 bar - Steam connection: 2 inch - Steam pressure range: 5-8 bar - Steam consumption: 370 m3/h Condensate and Suction - Condensate connection: 1 1/4 inch - Suction connection: 1 x 150 mm and 1 x 200 mm - Noise lev ...

A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible.

Separate control cabinet system, fleece filter system

Manufacturer: Fraunhofer Model: HEIS Laser 1 Year of manufacture: 2023 Status: Fully operational CE certified: Yes Technical Specifications - Supply voltage: 3 x 400 VAC / 50 Hz - Fuse protection: 3 x 50 A - Rated current: 50 A - Laser wavelength: 9 to 12 micrometers - Laser average rated power: 450 W Hardware Components Included - Beckhoff control PC - Philips monitor - Laser source OEM 45 IX - Water-air cooler and cooling water system - Scanner IntelliSCAN 20 with VarioSCAN 40 - Beam guidance system - Air conditioning system - Cooling water system - Control panel Peripheral Equipment Included - ULT extraction and filter unit - Riedel Kooling chiller unit, Find more here - / Contact us at -

Manufacturer: Baublys Model: BL5000 G30 Sy / NC303030 Year of manufacture: 2020 Status: Fully operational CE certified: Yes Laser Specifications - Laser type: CO2 laser - Average laser power: 30 W - Laser class: 4 - Wavelength: 10.6 micrometers Technical Specifications - Operating voltage: 400 V / 50 Hz - Max. power consumption: 2.8 kVA - Fuse protection: 16 A - Connection: 5-pin CEE plug - Machine dimensions: 860 x 1,493 x 1,777 mm - Machine weight: approx. 465 kg Workpiece Capacity - Max. workpiece height: 300 mm - Working table size: 550 x 375 mm - Max. workpiece weight: 75 kg Find more here - / Contact us at -

PETER WOLTERS AC1200-P Double-sided polishing machine Working hours: 14713 2016 vintage PETER WOLTERS AC 1200F Grinding machine Copper pipe leaking Spare parts for copper pipe Working hours: 2024 2017 vintage PETER WOLTERS AC1200-P Polishing machine Water pressure sensor currently nonfunctional Working hours: 10041 2017 vintage PETER WOLTERS AC 1200F Grinding machine Working hours: 5625 Cooling board currently nonfunctional 2016 vintage (4) units of Peter Wolters AC 1200 systems (2 polishers, 2 grinders), but the seller is coming down on price and I wanted to make you aware of the discount as these are going to be the cheapest AC 1200's we've ever sold. All of the machines are complete and still installed at the seller’s site, but they no longer need these in their process, so they are available for immediate release at a discounted price to facilitate a ...

Large batch of test pin sets + end-of-measure box sets from Garant / HHW Auction-ID: A7-47109-137

Condition unchecked Auction-ID: A7-47109-99

Circulation coins Norway/ Sweden/ Finland, Norway 120 pcs. = 111.53 NKr, Sweden 180 pcs.=41.92 SKr, Finland 188 pcs.=25.29 FMK, album

Silver medals 22 pieces total approx. 277.76 gr fine silver

Consisting of two pieces Type: GOP 55-36 incl. matching tool case Reference: Common - Lot 17 Auction-ID: A7-46763-139

Batch that is part of a combination of batches Auction-ID: A1-47254-104

Terex Finlay 883T (or 883TS) = more advanced version with triple shaft (3-axis) sieve. Can handle heavier materials than 883. Auction-ID: A3-43543-16501

Finishing machine for digitally printed labels, - Track width: 340 mm (max.), - Speed fully rotary: 120 m/min. (max.), - Report length: 152 - 457 mm (max.), unwinder:, - electronic rail guidance control system, - 3/76 mm spindle with magnetic brake, - Rolling diameter Ø 700 mm (max.), - 2 x 3/76 mm spindles with magnetic brake, - Rolling diameter: 2 x Ø 600 mm (max.), - automatic rail voltage control, - 1 x 3/76 mm spindle, unclogging/scrap, Flexowerk UV, fully rotary:, - servo-controlled press, - automatic register control, - UV drying unit, - 1 x anilox roller, - 1 x plate cylinder, Cold foil / laminating station:, - 2 x 3/76 mm spindles, - Wet laminating / cold laminating, - Laminate/Delaminate, Stamping shop, fully rotary/semi-rotary, - Stanzbreite: 330 mm (max.), - Punching tolerance: +/- 0.15 mm, - Magnet Cylinder: 22/176 Zähne, - automatic register control, - Servo control, Sep ...

Carbide-tipped circular saw blade sharpening machine – Vollmer Dornhan FINIMAT IIA/600TS Description Industrial circular saw blade sharpening machine, model Vollmer FINIMAT IIA/600TS, manufactured in Germany, for carbide-tipped (TCT/Vidia) circular saw blades. Equipped with a hydraulic feed system and an automatic cycle, the machine ensures precise and consistent tooth grinding. It operates with a diamond grinding wheel and allows for complete adjustment of the tooth geometry. Technical Data • Manufacturer: Vollmer (Germany) • Model: FINIMAT IIA/600TS • Machine Type: Carbide Circular Saw Blade Sharpening Machine Capacity: • Saw Blade Diameter: Ø100 – Ø600 mm • Max. Tooth Pitch: 110 mm • Max. Blade Thickness: 16 mm Grinding Range • Rake Angle: 5° – 45° • Back Angle: 8° – 45° • Top Bevel Angle: 0° – 45° • Side Angle: 0° – 12° Drive ...

Rösler mass finishing machine incl. belt dryer, vibrator & placement system Auction-ID: A7-47277-95

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   total power consumption: 140 kW   mains power supply: 145 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2540 mm   space requirements -front/back-: 5000 mm   total height: 2840 mm   total weight approx.: 12000 kg Laminating machine Maximum textile width 3200 mm Maximum temperature 240 °C Heating time (at 3 m/min) approx. 2 hours Cooling time (at 6 m/min) approx. 3 hours Mechanical speed 0-40 m/min

Satin finishing machine with accessories. See pictures Connection voltage 230 V Power 1.2 KW Mounting diameter 19mm mm Speed 1000 - 3000 rpm Roller width max. 100 mm Roller length max. 120 mm Weight 2.8 kg Condition: never used / new (5) Auction-ID: A7-47818-886

Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5) Auction-ID: A7-47818-874

Technical data Manufacturer: FINI Type: F.C. ROTAR 30C10 Year of Make: 1998 Serial Number: 9077242548 Power: 22 kW Current consumption: 42 A Frequency: 50 Hz Max. pressure: 10 bar / 145 PSI Flow rate: 2850 l/min / 100.70 CFM Hours: 24891 h Noise level: 72 dB(A) Configuration Screw compressor with control panel, pressure indicators, temperature display, hour meter and integrated control cabinet. Auction-ID: A7-47854-5

Fine-sawn board made of Central European Spruce, impregnated with a size of 179.5x20x1.9 cm. Auction-ID: A1-45057-2211

Fine-sawn board made of Central European Spruce, impregnated with a size of 179.5x20x1.9 cm. Auction-ID: A1-45057-2212