fin machines used for sale

CONTROLS   PLC PRESS DESIGN   quick die change system: yes SLIDE   total force (nominal): 630 to   stroke: 125 mm V-RING   nominal force: 320 to TOOL DIMENSIONS   lower table (left-right): 800 mm   lower table (front-back): 800 mm   shut height max.: 420 mm STRIP-FEEDER   band lubrication system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6800 mm   space requirements -front/back-: 3300 mm   total height: 3730 mm   height above floor level: 3005 mm   height under floor level: 725 mm   total weight approx.: 26000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   light barrier: yes   decoiler: yes   leveller unit: yes Strip levelling machine SCHMID HR12H (YoM 1995)

SLIDE   total force (nominal): 40 to   stroke rate (max.): 110 /min TOOL DIMENSIONS   lower table (left-right): 300 mm   lower table (front-back): 280 mm   shut height max.: 180 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1835 mm   space requirements -front/back-: 1500 mm   total height: 1800 mm   total weight approx.: 2500 kg

pressure: 20 t total power requirement: 20 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FEINTOOL GKP-FN 80 ist eine Feinstanzpresse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Werkzeugaufspannflächen oben/unten 420 x 420 mm, Bandbreite 90 mm, maximale Materialstärke 3 mm, Stempelhub bis 90 mm, Hubzahl stufenlos 30–120 Hübe/min, Werkzeughöhe 150–250 mm. Technische Daten: Stösseldruck 80 t (800 kN), Hauptmotor 6 kW, Anschluss 3x 380 V 50 Hz, Maschinengewicht ca. 6000 kg, Abmessungen L 2970 x B 1665 x H 2420 mm. Zubehör: Vorschub-Einrichtung und Werkstückzähler. Erreicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrmacherei, Werkzeugmaschinen, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

FEINTOOL GKP-F-40 ist eine hydraulische Feinschneidanlage für Präzision, hohe Genauigkeit und Zuverlässigkeit. 40 t Stößeldruck; Gegendruck 0,5–12 t; Niederhalter 2–12 t; Tisch 300×280 mm; 45–110 Hübe/min; Werkzeughöhe 110–180 mm; T-Nut 12 mm; max Materialdicke 4 mm. 3×380 V 50 Hz; Hauptmotor 3 kW; Gewicht ~2500 kg; Abm. 1835×1500×1800 mm; Schaltschrank 900×400×1800 mm. Zubehör: Vorschub (Bandbreite max 100 mm), Werkstückzähler. Für enge Toleranzen; Branchen: Automotive, Uhrenbau, Werkzeugmaschinen, Luftfahrt, MedTech. Technische Daten ohne Gewähr

FEINTOOL HFA 400 ist eine Feinstanzpresse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Gesamtkraft 4000 kN; Ringzackenkraft 1800 kN; Gegenhaltekraft 800 kN; Ausstoss 300 kN; Abstreifkraft 590 kN; Werkzeugaufspannflächen oben 800x800 mm, unten 1000x810 mm; Schnittgeschwindigkeit 5–50 mm/s, Schliessgeschw. max. 120 mm/s, Rücklauf 135 mm/s, bis 150/230 c/min. Technisch: 3x380V 50Hz, Hauptmotor 75 kW, Gesamtleistungsbedarf 82 kW, Gewicht ~21700 kg, Abmessungen 5000x3300x3360 mm. Zubehör: Walzenvorschub, Bandzuführung, Haspel. Ermöglicht enge Toleranzen in anspruchsvollen Industrien. Technische Daten ohne Gewähr

FEINTOOL 50/80 ist eine Feinstanzpresse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Stösseldruck 80 t, hydraulischer Niederhalter 25 t; fester Tisch 470×420 mm; Spannflächen oben 400×400 mm, unten 470×420 mm; Hubzahl 28–72 c/min; Blechstärke bis 5 mm. Wichtige technische Daten: Anschluss 50 Hz, 3×380 V; Hauptmotor 12 kW; Maschinengewicht ca. 6000 kg; Abmessungen L1600×B1400×H2500 mm. Entwickelt zur Erzielung enger Toleranzen, geeignet für Automobil-, Uhren-, Werkzeugmaschinen-, Luftfahrt- und Medizinbereiche. Technische Daten ohne Gewähr

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 10 mm TOOL DIMENSIONS   lower table (left-right): 480 mm   lower table (front-back): 520 mm   upper table (left-right): 480 mm   upper table (front-back): 520 mm   shut height max.: 314 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 999.9 mm   sheet length min: 2000 mm   pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individua ...

PRESS DESIGN   quick die change system: yes SLIDE   total force (nominal): 100 to   stroke: 20 mm   stroke rate (max.): 80 /min TOOL DIMENSIONS   lower table (left-right): 430 mm   shut height max.: 220 mm Approx. 79 million strokes

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   total power consumption: 140 kW   mains power supply: 145 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2540 mm   space requirements -front/back-: 5000 mm   total height: 2840 mm   total weight approx.: 12000 kg Laminating machine Maximum textile width 3200 mm Maximum temperature 240 °C Heating time (at 3 m/min) approx. 2 hours Cooling time (at 6 m/min) approx. 3 hours Mechanical speed 0-40 m/min

We offer a Microslicer BMC125-7.5 food machine for the production of flowable products and bulk materials. It is ideally suited for fine shredding and emulsification for meat, sausage, confectionery and delicatessen production. Application examples: - Emulsification of sauces and dressings in circulation, such as desserts, sauces, emulsions, dips, mayonnaise, ketchup, pastes - Production of boiled sausage and cooked sausage meat, rind emulsion - Crushing and straining of fruits and vegetables - Nut and almond crushing - Crushing of biscuit and chocolate curds The machine consists of a 50 litre hopper incl. lid with an agitator incl. scraper and a knife for pre-shredding, a contactless 125mm cutting set (rotor-stator principle, 3,000 rpm, 0.5mm cutting gap), a motor block with a powerful 7.5 KW motor (400 volts) incl. 6m cable and 32A plug, a round spout optionally for liquids  ...

Die-cutting Slitting | Rewinding Web Width 330mm Max Speed 305 mpm May vary with application Max Unwind Diameter 711 mm Max Single Spindle Rewind Diameter 457 mm Max Dual Spindle Rewind Diameter 406 mm The Station Anvil Size 381 mm The Repeat Range 161-381 mm

Stopped in 2025, exellent condition Auction-ID: A7-49767-9

CONTROLS   PLC LAUER SLIDE   total force (nominal): 320 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 10 mm/s   working velocity max.: 44 mm/s COUNTER RAM   nominal force: 63 to   stroke: 30 mm V-RING   nominal force: 100 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 500 mm   lower table (front-back): 500 mm   upper table (left-right): 695 mm   upper table (front-back): 730 mm   shut height max.: 650 mm DECOILER   sheet width max.: 250 mm   sheet width (min): 40 mm   coil weight max.: 1250 to   max. diameter of coil: 1300 mm LEVELLER UNIT   sheet width max.: 250 mm   sheet thickness max.: 5 mm   sheet thickness min.: 0.8 mm   number of leveller rolls: 11   feed velocity min.: 4 m/min   feed velocity max.: 12 m/min STRIP-FEEDER   feeder type: grip feeder   she ...

SCHALLBERGER FACETTESTAR machine for precision edge finishing, chamfering and deburring of tools or metal parts. This type of equipment is used in mechanical workshops to improve the quality of edges, reduce tool wear and ensure better service performance. The machine enables smooth, controlled and repeatable work, which is essential in precision applications. Ideal for: CNC machine shops Tool Manufacturing Precision mechanics Industrial production Technical maintenance Equipment sought after for finishing and edge preparation work. Auction-ID: A1-48554-20

Operating voltage: 230 V Frequency: 50 Hz Connection: 1200 Rated current: 5.5 A Speed: from 900 to 2700 rpm incl. case Reference: Baumstark - Lot 49 Auction-ID: A7-49882-79

PRESS DESIGN   drive system: hydraulic SLIDE   total force (nominal): 40 to   stroke: 45 mm   stroke rate (max.): 110 /min TOOL DIMENSIONS   lower table (left-right): 300 mm   lower table (front-back): 280 mm   shut height max.: 90 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1835 mm   space requirements -front/back-: 1500 mm   total height: 1800 mm   total weight approx.: 2500 kg

SLIDE   total force (nominal): 80 to   stroke rate (max.): 120 /min V-RING   stroke: 90 mm TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2970 mm   space requirements -front/back-: 1665 mm   total height: 242 mm   total weight approx.: 6000 kg

Christian Carl CC Fine Combustion Boiler with 265l Filling Volume, in Very Good, Maintained Condition Diameter = approx. 70cm Total height = approx. 335cm - Height of boiler = approx. 170cm - Height of dephlegmator approx. 165cm Auction-ID: A1-49805-3

including punching tools, machine is professionally disconnected and disassembled for loading on your transport, additional costs are mentioned separately during both Auction-ID: A1-49836-22

Max. roll weight: 800 kg Paper weight: approx. 40–300 g/m², depending on Auction-ID: A1-49964-27

Krone EasyCut 280 CV mowing conditioner – 2007 – 2.80 m – steel conditioner fingers Specifications: Brand/type: Krone EasyCut 280 CV Year of construction: 2007 Serial Number: 733401 Working width: approx. 2,800 mm Transport width: approx. 3,000 mm Number of cutting discs: 4 Number of mower drums: 2 Conditioner: steel conditioner fingers Conditioner speed: approx. 600/900 rpm Power requirement: approx. 51 kW / 70 hp Coupling: Cat. II Own weight according to specification: approx. 1,200 kg Dimensions as specified: approx. 4,000 × 2,000 × 1,000 mm Features: Center suspension Mechanical spring relief Hydraulically Folding Guards Associated PTO shaft Auction-ID: A1-47389-196

Reform M3 Finger Bar Mower – 125 cm – 2017 Specifications: Brand: Reform Type: M3 Finger Bar Type code: 105.011 Year of construction: 2017 Serial Number: 105011LAC7146 Hour reading: approx. 581 hours, read Cutting width: approx. 125 cm Engine power: 8.8 kW / approx. 12 hp Engine: 4-stroke petrol engine Transmission: 3 forward and 3 reverse gears Tires: off-road/tread tires Wheel version: double wheels Own weight: approx. 215 kg, depending on version Dimensions: approx. 100 × 125 × 100 cm Features: Finger cutter bar Mechanically driven cutter bar PTO drive for cutter bar Mechanical transmission Adjustable control handles Large all-terrain tires Double wheel design for extra track width and stability Hour meter CE marking Particularities: The effect is unknown; The machine has not been tested. Charging is possible; A forklift and loading dock are a ...

Reform M3 Finger Bar Mower – 125 cm – 2019 Specifications: Brand: Reform Type: M3 Finger Bar Year of construction: 2019 Serial Number: 105011LAC9150 Hours: approx. 241 hours Cutting width: approx. 125 cm Engine: 4-stroke petrol engine Transmission: 3 forward and 3 reverse gears Tyres: treaded tyres Own weight: approx. 215 kg Dimensions: approx. 100 × 125 × 100 cm Operation: functions according to the specifications Features: Finger cutter bar Driven wheel Adjustable control handles Mechanical transmission PTO drive for the cutter bar Particularities: Suitable for mowing grass and vegetation on verges, embankments and sloping terrain. Charging is possible; A loading dock and forklift are available. Auction-ID: A1-47389-309

in aluminium, PVC, galvanised; Lengths approximately 250 to 360cm Auction-ID: A1-49374-75

in aluminum and wood; lengths up to approximately 5m Auction-ID: A1-49374-77

Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11 Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11 Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator MC-80a MC-80m - 2 x 8 Stations Feeder Baujahr / Year 1998 - Serial-No. 042016 Format / Size min. 110 x 160mm - max. 318 x 470mm Grammatur / Paper weight 50-260g/qm Stapelhöhe / Infeed height Station 50mm Geschwindigkeit / Speed 5.100 Product/h Broschürenfertigung / Booklet Maker SPF-11 - FC-11 Baujahr / Year 1998 - Serial-No. 128032 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Rietschle Auslage / Delivery - Rüttler / Jogger PJ-7 ...

Tube grinding/satin finishing machine - for grinding, satin finishing, and mirror polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5) Auction-ID: A7-50084-80

2x - Free-hanging washbasin from the Wiesbaden Finta series. Executed with a rectangular shape and rounded corners. The sink has one central tap hole and an integrated overflow. Suitable for wall mounting in bathroom and toilet areas. Excluding tap, waste and siphon. The item is sold on an \"as is\" basis (As-Is), and as described. The lot description is leading for the content; Any accessories, decorations or other items depicted that are not mentioned in the description are not part of the lot. Auction-ID: A1-49250-243

Auction-ID: A1-50229-30

Sea-Finder 435 sloop + 9.8 hp Tohatsu + 750 kg tilting trailer Length 4.35 meters Width 1.80 meters Year of construction boat 2021 Year of construction engine 2022 Power 9.8 hp Boat, engine and trailer are technically and options in perfect condition, everything works properly, boarding and sailing! Options Spray hood with rear sail Beige cable fender Foam deck floor Stainless steel swimming ladder Sundeck Removable table 12V + USB connection Bow lighting Top light Water resistant upholstery 4 Fenders Engine: Tohatsu 9.8 hp electric started Long tail Remote control Trailer: 750 kg unbraked tilting trailer with detachable light bar Auction-ID: A1-40314-12

workpiece diameter:26 mm swing diameter:- mm workpiece length:66 mm total power requirement:12 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic   quick die change system: yes   feedstock transport direction: right to left SLIDE   total force (nominal): 400 to   stroke: 200 mm COUNTER RAM   nominal force: 100 to   stroke: 30 mm V-RING   nominal force: 200 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 650 mm   lower table (front-back): 650 mm   shut height max.: 420 mm   passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 12 mm   feed velocity max.: 30 m/min   feedstock transport direction: right to left LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 60 mm   sheet thickness max.: 12 mm   sheet thickness min.: 1 mm   integrated feed function: yes STRIP-FEEDER   sheet width max.: 400 mm   sheet  ...

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

Machine is in good condition.

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

REF-2665 ILPRA FS 2500 V/G AUTOMATIC CUP FILLER-SEALER Manufacturer: ILPRA Series: FILL SEAL Model: FS 2500 V/G FL Serial no.: FS1071 Year: 2017 Automatic rotary filling-sealing machine for cups of different materials. Compact and flexible model, tailored to handle a diverse range of food products from liquids and creams to granules, even with solid particles in suspension. Maximum output of approximately 2,500 pieces per hour. Voltage: 400 V + N Overall dimensions (mm): 2,350 x 1,280 x 2,200 (LxWxH) Weight: approx. 900 kg

Bulk Distribution Station

From a current recycling we offer you 2 used column drilling machines / thread cutting machines from maxion, type BS 36 GL. Year of Make: 2022 Condition: good Hours: Asking price: 5,000 € each Original price: 11.900 € each Equipment / accessories / other information: Tapping capacity: M5-M30 Spindle speeds: 160-260-380-580-880 rpm Spindle MK 4 Thread depth 90mm Drilling depth 160mm Radius 300m Table 550x440mm Overall height 2105mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

From a current recycling we offer you a used column drilling machine / thread cutting machine from Maxion, type BS 50 GL. Year of Make: 2022 Condition: good Hours: Asking price: 9.900 € Original price: € 18,900 Equipment / accessories / other information: Tapping capacity: M5-M45 Spindle speeds infinitely variable 35-530 rpm Spindle MK 4 Thread depth 150mm Drilling depth 200mm Radius 325m Table 650x5000mm Overall height 2150mm Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here

Various machines mostly Wafios or Deiters available! Eg. Wafios UF30 / VDF80 / DF3

We can offer you all types of screw making machinery for M3 - M25