fin machines used for sale

WEINIG GRECON double-head finger joint line mod. PJ 150/500 - CE - Wood length at the entrance 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Press length 6100 - Pressure force 120 kN - 15Kw cutter motor - 5.5Kw engraver - Year 2004 CE

E-chain hoist, electric hoist, crane GIS type EM 25Fabr. No: 24468 Year of construction 1998Lifting capacity: 250 kgHook travel: 3.4 metersMain lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min.1 load string = 250 kgCable length Control bottle: approx. 1.7 metresPower supply: 400 volts, 50 Hz- suspension eye on the top of the crane - without chassisWeight: 24 kggood condition; used

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: servohydraulic   frame design: H-frame, tie rod   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 1100 to   stroke: 130 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 330 to   stroke: 40 mm V-RING   nominal force: 500 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 960 mm   lower table (front-back): 960 mm   upper table (left-right): 960 mm   upper table (front-back): 960 mm   shut height max.: 470 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 16 mm   coil weight max.: 8 to   feedstock t ...

Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 1 ...

Manufacturer: Rösler Model: Centrifuge Z 800 Year of Manufacture: 2018 Centrifuge Weight: 350 kg Inner Drum Diameter: 382 mm Technical Specifications: - Drive Power: 5.0 kW - Operating Voltage: 400V / 50Hz - Max. Speed: 2850 RPM - Max. Load: 40 kg - Max. Throughput: 1200 l/h - Max. Room Temperature: 40 °C - Filling Temperature Range: 0 – 50 °C Certifications: CE Certified Find more here - / Contact us at -

SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed max.: 48 m/min  &nbs ...

Suitable for Yanmar VIO 75 mini excavator/Nabtesco, model MSP 00 2609

1 BREITENBACH type Benjamin 3, 5-D high-performance continuous dyeing and finishing machine for elastic and rigid narrow fabrics (and bands, ribbons or tapes) made of polyamide, cotton or viscose year 1999 composed of: foulard dyeing padder roller width 300 mm with electrically heated vat, steamer capacity 34 m, 5 washing boxes each with squeezing padder and indirect steam heating, chemical finishing padder, hot air dryer capacity 50 m gas heated, exit for 4 tapes

Planing machine / finishing machine Manufacturer: Marunaka Model: Royal FX Squeegee Blade Bottom Cutting width depending on the cutting angle max. approx. 250mm Workpiece height max. 180mm 2 machines mounted on trolleys.

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 10 mm TOOL DIMENSIONS   lower table (left-right): 480 mm   lower table (front-back): 520 mm   upper table (left-right): 480 mm   upper table (front-back): 520 mm   shut height max.: 314 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 999 ...

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: servomechanic   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 70 mm   stroke rate (max.): 140 /min COUNTER RAM   nominal force: 80 to   stroke: 25 mm V-RING   nominal force: 125 to   stroke: 25 mm TOOL DIMENSIONS   lower table (left-right): 600 mm   lower table (front-back): 600 mm   upper table (left-right): 600 mm   upper table (front-back): 600 mm   shut height max.: 386 mm   ram adjustment: 125 mm COIL CHAIR   coil weight max.: 5 to DECOILER   design: single reel   sheet width max.: 500 mm   coil weight max.: 5 to LEVELLER UNIT  &nb ...

CONTROLS   PC controller BECKHOFF Offer for services of complete Overhaul of a Customer-Supplied Fineblanking Press FEINTOOL GKP 160Scope of Overhaul• Complete disassembly into individual components• Inspection of all parts, including crack testing of critical components• Overhaul of the drive system, new motors• Reworking and precise alignment of all guideways• Complete overhaul of the hydraulic cylinders• Overhaul of the clamping tables• Installation of a new hydraulic unit• Renewal of the pneumatic system• Renewal of the electrical systemModernisation / Retrofit• Combined table • Servo feed systems• Central lubrication system • RAZIOL band lubrication• New brake/clutch unit• BECKHOFF PC-based control system with touch panel• PILZ safety control system• Implementation of CE  ...

SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min   stroke rate (min.): 15 /min COUNTER RAM   nominal force: 75 to V-RING   nominal force: 75 to TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm STRIP-FEEDER   sheet width max.: 250 mm   sheet thickness max.: 10 mm   sheet length min: 1500 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 3150 mm   space requirements -front/back-: 2120 mm   total height: 3000 mm   total weight approx.: 14000 kg Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side p ...

- Producer Finnrose - Working width 1.400 mm - Diameter roller 65 mm - Roller pitch 100 mm - alle Rollen mit Gummioberfläche - Feed speed infinitely adjustable by hand wheel - Feed speed ca. 2 - 8 m/min - Length 3.410 mm - Voltage / HZ 400 V / 50 HZ - Location, in stock D-32825 Blomberg

Mit Lichtschranke am Ende des Bandes für Transportstop - Producer MinkDK - Length 1.700 mm - Belt with 1.220 mm - Working width 1.200 mm - Working height 900 + - 30 mm - Length 1.300 mm - FU-Regelung für Feed speed 2 - 10 m/min - Location, in stock - Voltage / HZ 230/50

- Producer Aagaard Finnrose - Year of construction 2005 - Working width 1.300 mm - Gesamtbreite 1.380 mm - Rollenbahnhöhe 800 mm - Diameter roller 65 mm - Roller pitch 110 mm - alle Rollen mit Gummioberfläche - FU-Regelung für Feed speed - Angetrieben - Length 3.000 mm - Colour 7035 - Motor power 0,37 kW - Voltage / HZ 400 / 50 - Location, in stock

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic   quick die change system: yes   feedstock transport direction: right to left SLIDE   total force (nominal): 400 to   stroke: 200 mm COUNTER RAM   nominal force: 100 to   stroke: 30 mm V-RING   nominal force: 200 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 650 mm   lower table (front-back): 650 mm   shut height max.: 420 mm   passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 12 mm   feed velocity max.: 30 m/min   feedstock transport direction: right to left LEVELLER UNIT   sheet width max.: 500 mm   sheet width (mi ...

CONTROLS   PLC PRESS DESIGN   drive system: hydraulic   quick die change system: yes SLIDE   total force (nominal): 450 to   stroke: 230 mm SLIDE (HYDR. PRESS)   working velocity min.: 5 mm/s   working velocity max.: 70 mm/s   return velocity max.: 200 mm/s   return force: 200 to V-RING   nominal force: 200 to TOOL DIMENSIONS   lower table (left-right): 790 mm   lower table (front-back): 760 mm OVERALL SPECIFICATIONS (COIL LINES)   coil weight max.: 3 to COIL CHAIR   coil weight max.: 3 to STRIP-FEEDER   feeder type: roll feeder   band lubrication system: yes ELECTRICAL SPECIFICATIONS   total power consumption: 150 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS    ...

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

Manufacturer: Rösler Model: F60 Motor Power: 3.3 kW / 400V / 3 phases / 50 Hz Technical Specifications: - Voltage: 400V - Frequency: 50 Hz - Power: 55 kW - Control Voltage: 24V DC - Max Current: 75 A The 2008 Rösler F60 finishing machine is part of Rösler´s line of surface finishing equipment, specializing in mass finishing processes such as deburring, polishing, cleaning, and edge radiusing for a variety of materials. Rösler, a well-known German manufacturer, focuses on advanced technology in vibratory and blast finishing, making the F60 suitable for applications across industries, including automotive, aerospace, medical devices, and general manufacturing. Key Features of the Rösler F60 Finishing Machine: - Process Type: - Vibratory Finishing: The F60 typically employs vibratory finishing, a method where parts are placed in a tub with abrasive media, which gently polishes ...

PRESS DESIGN   drive system: hydraulic SLIDE   total force (nominal): 400 to SLIDE (HYDR. PRESS)   working velocity max.: 120 mm/s COUNTER RAM   nominal force: 100 to V-RING   nominal force: 200 to

Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol

A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible.

Inv. Num. : 9031 Type: DEF FA 85 Producer: Soco Generated: Parameters: Machining length: 25–320 mm. Diameter: 25–85 mm.

Inv. Num. : 9030 Type: EM80 Producer: ADIGE Created: 2015 Parameters: Control system: SIEMENS Switch-on hours: 37558 h Hours: 26407 h Machine weight: 8500 kg The machine is designed to process steel tubes with a length of 20–600 mm and a diameter of 20–80 mm.

vibratory feeder diameter range 3,5-10 mm total screw length 150 mm output - pieces/min 28 head dia. 24 mm max.

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   total power consumption: 140 kW   mains power supply: 145 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2540 mm   space requirements -front/back-: 5000 mm   total height: 2840 mm   total weight approx.: 12000 kg Laminating machine Maximum textile width 3200 mm Maximum temperature 240 °C Heating time (at 3 m/min) approx. 2 hours Cooling time (at 6 m/min) approx. 3 hours Mechanical speed 0-40 m/min

In stock on pallet Auction-ID: A1-45003-139

Pore finder, pore finder, surface tester -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg

Vibratory finishing machines Pre-filter system, filter system, pre-filter container, water filter for cylindrical vibrator, vibratory finishing machine, vibratory finishing system, vibratory finishing cylindrical vibrator, Trowal system, continuous vibrator -Pre-filter system: for vibratory finishing machines or others -Transport frame: mobile, with 2 filter inserts -Collection tank: volume approx. 350 litres -Total dimensions: 1400/620/H920 mm -Weight: 106 kg

Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

CONTROLS   PLC HONEYWELL IPC 620-20 PRESS DESIGN   drive system: hydraulic   quick die change system: yes SLIDE   total force (nominal): 630 to   stroke: 155 mm COUNTER RAM   nominal force: 160 to V-RING   nominal force: 320 to TOOL DIMENSIONS   lower table (left-right): 650 mm   lower table (front-back): 650 mm   upper table (left-right): 870 mm   upper table (front-back): 950 mm   distance between columns (H-frame): 872 mm   passline opening (free passage in side columns): 470 mm STRIP-FEEDER   feeder type: grip feeder   sheet width max.: 450 mm   sheet thickness max.: 30 mm   feeding step max.: 400 mm CROP SHEAR   working width max.: 450 mm DIMENSIONS / WEIGHTS   total weight approx.: 28000 kg AT ...

An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible.

1st owner Supplied with the machine: Pipes Throwing lance The machine has a karcher that allows the machine to be cleaned at the end of the day Auction-ID: A3-43366-35274

Please note, the photos are standard packages -> the actual package may vary slightly. Auction-ID: A1-43751-92

Please note, the photos are standard packages -> the actual package may vary slightly. Auction-ID: A1-43751-91

Rösler mass finishing machine incl. belt dryer, vibrator Dimensions: Drying plant: H:1900 W:1800 L:3000 Vibrator: H:1500 B:1800 L:1800 Mounter: H:1700 W:1300 L:2100 Auction-ID: A7-45416-110

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-138

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-43

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-141

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-135

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-48

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-58

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-60

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-124

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-128

Please note, the photos are standard packages -> the actual package may vary slightly. Auction-ID: A1-43751-89

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-45