fin machines used for sale

: 1500 mm tank diameter / tank height: 1500 / 500 mm turning speed range: 1500 U/min voltage: 380 V power requirement: 18 kW volumn: 300 Liter weight of the machine ca.: 1,2 t dimensions: 1,5 x 1,6 x 1,6 m Vibration dryer See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OLI CASE PACKER, MODEL OLI 210 - OLIMAT 2P Compact and space-efficient. Documentation available (details on request). PLC: telemechanic TSX premium Incoterm: EXW PRODUCTION Cases format range: 100 x 60 x 100 mm (min); 500 x 340 x 400 mm (max) Max speed: 20 cases/min (160 cartons/minute) Introduction height: 900 mm; Cartons exit height: 1100 mm OTHER CHARACTERISTICS Machine size: 4700 x 1600 x 2000 mm ENERGY CONSUMPTION Power supply: 4KVA, 3-ph 400/230V/N/PE, 50 Hz, 16A Air: 6 bar

OLI CASE PACKER, MODEL OLI 210/OLIMAT 2P Automatic case packer. With full documentation. Composed of 2 modules OLI 210: for products in feeding, staking and introduction OLIMAT 2P: for case-shaping, closing and out feeding PLC: TSX Panel command : MAGELIS Incoterm: EXW PRODUCTION Max speed: 20 cases/mn (160 cartons/mn) Cases format range: 100 x 60 x 100 mm (min); 500 x 340 x 400 mm (max) Cases introduction: Left Product entry height: 900 mm Product exit height: 1100 mm Size: 4700 x 1600 x 2000 mm (approximately) ENERGY CONSUMPTION Power: 5 KVA, 3 x 400 V/N/PE; Operating pressure: 6 bar

workpiece diameter: 660 mm workpiece length: 8000 mm honing/re-bore length: 7600 mm internal diameter: 50,8 - 609,6 mm stroke length max.: 7600 mm spindle motor: 29,8 kW spindle turning speed range: 0 - 300 U/min Lifting capacity: 13,5 kW stroke speed: 0 - 30,5 m/min workpiece weight: 8000 kg control: Siemens Simatic total power requirement: - kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 18,7 x 1,5 x 1,5 m Universal horizontal. Honing Machine / Long Stroke Cross Grinding Machine with servo drive and electrical feed system - Siemens Simatic (Touch) - Coolant system with paper band filter - steady rest The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PETER WOLTERS AC1200-P Double-sided polishing machine Working hours: 14713 2016 vintage PETER WOLTERS AC 1200F Grinding machine Copper pipe leaking Spare parts for copper pipe Working hours: 2024 2017 vintage PETER WOLTERS AC1200-P Polishing machine Water pressure sensor currently nonfunctional Working hours: 10041 2017 vintage PETER WOLTERS AC 1200F Grinding machine Working hours: 5625 Cooling board currently nonfunctional 2016 vintage (4) units of Peter Wolters AC 1200 systems (2 polishers, 2 grinders), but the seller is coming down on price and I wanted to make you aware of the discount as these are going to be the cheapest AC 1200's we've ever sold. All of the machines are complete and still installed at the seller’s site, but they no longer need these in their process, so they are available for immediate release at a discounted price to facilitate a ...

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol

KROMAS VM 200 Mass Grinding Machine -Capacity 200 liters - Motor power (kW): 1.1 kW -Inner diameter 980mm -Soundproof cover -Separation facility -Control / ON / OFF / SAVE / TIMER / Stepless speed regulation -Machine feet -Sliding Stones -Documentation Dimensions: LxWxH 1.5x1.5x1.6 meters / Weight 650Kg

MultiFlex superfinishing machine for machining cylindrical and wave-shaped workpieces with superfinishing belt. Machine type: Multiflex 722/2 Machine No.: 770041 Technical data Superfinish strip processing of handlebars Workpiece length: max. 1000 mm Workpiece diameter: max. 100 mm Ball screw diameter: max. 35 mm Condition: Technical – good / Optical – used (Pictures partly similar)

BaseFlex 1300 superfinishing machine for machining crankshafts and camshafts. Machine type: BaseFlex 1300/1 Machine No.: 770046 Technical data Superfinish strip machining of crankshafts and camshafts Center width: max. 1300 mm Stroke: max. 180 mm Loading height: max. 1000 m With pallet conveyor Condition: Technical – good / Optical – used (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

Nano superfinishing machine for surface machining of gears, sealing components, injectors. Machine Type: Nano Machine No.: 770057 Technical data Superfinish plan machining Standard version with fire extinguishing system Workpiece length: max. 150 mm Workpiece diameter: max. 100 mm Processing diameter: max. 50 mm Meitec In-Process Measurement Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex Machine No.: 780695 Technical data Superfinish Stone Processing Outer diameter: 20 – 200 mm Inner diameter: min. 10 mm Width: max. 130 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex 725-727/1 Machine No.: 770062 Technical data Superfinish Stone Processing Workpiece diameter: max. 200 – 650 mm Workpiece width: max. 100 – 250 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinishing machine RacePro 4000 machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RacePro 4000 Machine No.: 780698 Technical data Superfinish Stone Processing Outer diameter: max. 4000 mm Inner diameter: min. 1200 mm Width: max. 400 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinish machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RaceX Machine No.: 780700 Technical data Superfinish Stone Processing Outer diameter: max. 320 mm Inner diameter: min. 40 mm Width: max. 260 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360034 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360039 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360041 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Factory New (Pictures partly similar)

honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.6 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.48 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic pallet wrapping machine manufactured by EAR FLAP, model 200 R27. The equipment incorporates a motorized turntable with a capacity for loads of up to 2,000 kg and a reel carriage with adjustable mechanical brake, and includes a control panel. Technical characteristics Model 200 R27 Year of manufacture 2017 Payload 2,000 L Motor 1 kW 220 V 50 Hz Turntable diameter 1,650 mm Transportation Information Length 2,400 mm Width 1,650 mm Height 2,700 mm No documentation In your state

charge load: 620 Liter : 1.700 mm tank diameter / tank height: 1.550 / 600 mm : 450 mm motor capacity: 4,5 / 7,5 kW motor speeds:: 900 / 1.485 U/min voltage: 400 V total power requirement: 8,5 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,00 x 1,70 x 1,50 m Soundproofing cover bracket: 3,30 x 0,60 x 0,40 m Finishing machine - Serial-No.: 36225 / 05 - Machine ON: 6.469 h - Pneumatic separating flap - Timer - Pneumatic soundproof cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 620 liter Outer dia. of work tank: 1695 mm tank length (expanded): 3800 mm width of working tank: 430 mm speeds: 900 - 1485 U/min voltage: 400 V total connected load: 7,5 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 - with continously variable motor speed - with pneumatic separation flap The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KREBSÖGE EL-PM ist eine Läpp- / Feinschleifmaschine hoher Präzision, ausgelegt für genaue und zuverlässige Bearbeitung. Arbeitsvermögen: Aufspanntisch Ø max. 500 mm; Einbauhöhe 350–850 mm; Läpphub 3–53 mm; maximaler Anpressdruck 420 kg. Hauptspezifikationen: Anschluss 50 Hz 3x 380 V; Druckluftanschluss 6 bar; Abmessungen Maschine L1200 x B550 x H2100 mm. Zur Erzielung enger Toleranzen geeignet; typische Einsatzbereiche: Automotive, Uhrentechnik, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

PETER WOLTERS AC 500 ist eine Läpp- / Feinschleifmaschine, ausgelegt für hohe Präzision, große Genauigkeit und Zuverlässigkeit. Ausführung: zwei Scheiben, Scheibendurchmesser max. 440 mm. Drehzahlen obere Scheibe: 2 Stufen 56–113 t/min; untere Scheibe: 2 Stufen 50–100 t/min; Werkstückantrieb: 3 Stufen 20–65 t/min. Belastung obere Scheibe bis 250 kg. Anschluss 50 Hz 3x 380 V; Druckluft 5 bar; Hauptmotor 1,0/1,4 kW; Werkstückantrieb 0,5/0,9 kW; Gewicht ca. 800 kg; Abmessungen L1700×B1250×H1750 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

PETER WOLTERS 3R600GR-PL-SA ist eine Läpp- /Feinschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit bei Läpp- und Feinbearbeitungen. Ausführung mit drei Scheiben und Abrichtringen; Innendurchmesser Ringe 248 mm; Läppscheibe Ø 610 mm; Läppscheibendrehzahl 30–90 t/min. Hauptmotor 2,2 kW; Gesamtleistungsbedarf 4 kVA; Anschluss 50 Hz 3x 400 V; Anschluss an Druckluft 4 bar; Abmessungen L1300 × B1160 × H1800 mm; Maschinengewicht ca. 820 kg. Zubehör: Abrichtringe und pneumatischer Niederhalter; Drei-Scheiben-Auslegung. Ermöglicht enge Toleranzen und hochwertige Oberflächen; typischer Einsatz in Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

HAHN + KOLB ZL 800 ist eine Läpp- / Feinschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und zuverlässigen Betrieb. Kapazitäten: Scheibendurchmesser max. 810 mm, größte Werkstücklänge 250 mm, Mitnehmer Ø 306 mm; obere und untere Scheibe 4 Stufen, 30 t/min–84 t/min. Technische Daten: Hauptmotor 3,0/4,0 kW, Gesamtleistungsbedarf 11 kW, Gewicht ca. 3500 kg, Abmessungen L1720×B2100×H2100 mm. Zubehör: Satz Schleifscheiben, Kühlmitteleinrichtung. Erreicht enge Toleranzen; typisch für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Chips - Centrifuge STEIMEL POLAR / S 5 - Drum diameter (basket) 500mm -Speed / power 1000 rpm adjustable up to max. 1400 rpm -Incl. documentation & electrical plan Dimensions: LxWxH 0.7x0.7x1.2 meters / Weight approx. 250Kg

Automatic Cartesian palletizer manufactured by HSK GmbH. The equipment receives the bags by conveyors, positions and forms them in layers and carries out palletizing automatically according to the programmed configuration. It offers a capacity of up to 1,200 bags/hour and a control system through a Siemens SIMATIC touch screen. It has spare parts for its different components. In your state

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

PVS Micro cut type MC 12 E to chop up and Elmolgieren of various products like ketchup / Majonäse / sauces / soups / mustard engine 9 kW of speed 3000 / U min Tichter 165 litres with Verrohrung and 3 road valves for circulation procedure Anew machine

Stephan Feinstzerzerer Type: MCH-D 60 Drive: 49 KW performance in the hour depending on the desired fineness of the starting product. From 2000 to 3500 Kg/hour This machine is ready for operation, as from the customer. With used but outdated cutting sets

; NEW

PVS 125 H micro cut Inotec drive power 15 KW product performance from 300 kg to 900 kg an hour for various products pesto sauces soups Majnäse and similar

AUTOMATIC DOVETAILING machine OMEC 750 I second hand machine machine is utilised to indent dovetails for drawers and various furniture elements CE compliant machine: YES machine also for curved pieces instruction and certification booklet: YES tool / cutter: YES volt. 380/50

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

Helium leak detector Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Connection: 230V Delivery time: from stock (e.g.V.); ready for use

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Double finisher 842 Multimatic with control year 08/2014, NP 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...

Double finisher 842 Multimatic with control year 09.2006, Np 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...

Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).

Endmass Cary 1, Frank 0, Frank 1, Sel gr. 0, Sel gr. 1

Fine-sighting system for final finenesses of up to 3 microns, consisting of: product task, Acucut Safe C-24, dust filter Bühler PGFG 60/18 (39 m2 filter area, pressure shock-resistant, without fan), various dust lines and control cabinet. Previous use: toner production (power: 200 - 600 kg/h). Appendix revised in 1993, regularly maintained.

Pneumatic 2 finger parallel gripper, PGN+ 160-1-SD, Schunk, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see  ...

Cutting sets and moving in snails Suitable for Stephan Machines

Wintersteiger DSG 150/200 Thin-cutting creel with center cut device and planing device Cutting width: 150 mm | Cutting height: 200 mm For sale is a professional thin-cutting creel of the type Wintersteiger DSG 150/200, equipped with a center cutting device and integrated planing unit. The machine is ideal for precise slat production with minimal material loss – especially in the parquet, furniture and solid wood processing sectors. Specifications: • Cutting width: up to 150 mm • Cutting height: up to 200 mm • Minimum fin thickness: approx. 1.5 mm • Kerf: from approx. 0.9–1.2 mm (depending on the tool) • Stroke rate: up to 450 strokes/min • Feed speed: approx. 0.3 – 1.8 m/min • Main motor power: 11 kW • Cutting accuracy: ± 0.1 mm Equipment: • Center incision device for centric incisions • Integrated planing device (double planer)  ...

1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder