137,922 used machines on RESALE, but how to find them? Machine Search
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Leaking oil working condition, hardly used Auction-ID: A3-46126-11240
: 0 bore depth: 10000 mm number of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mm swing diameter over bed slide: 1600 mm boring diameter: 50 - 310 mm centre height: 800 mm speeds:: 2,5 - 400 total power requirement: 74 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; testing is possible by prior arrangement. • Fanuc iSeries • Cast-iron bed with 30° slant, linear rolling guideways • Machine weight: 3900 kg • X/Z/Y axis travels: 205/560/105 (±52.5) mm • C-axis travel (spindle rotation): ±360° • X/Y/Z axis rapid traverse: 30/10/36 m/min • Spindle: ASA A2-6 spindle nose, standard hydraulic 3-jaw chuck (210 mm / 8" diameter), max. spindle speed: 4500 rpm, spindle motor power (S1 continuous/S3 60%/S3 25%): 11/11/15 kW • Draw tube inner diameter: 68 mm • Automatic tool change: tool turret capacity: 12 (24) stations, live tool stations: 12, live tool speed (infinitely variable): 6000 rpm • Max. swing over bed: 600 mm • Max. swing over carriage: 400 mm • Max. turning diameter: 300 mm • Max. bar turning diameter: 65 mm • Parts catcher with conveyor • Bar puller • Manual work ...
FIXED BED MILLING MACHINE "CORREA" FEATURES: Dimensions • Table dimensions: 2,000 x 630 mm • Number of T-slots: 6 • T-slot dimensions: 18 mm Axis Travels • Longitudinal travel X: 1,800 mm • Cross travel Y: 800 mm • Vertical Z Travel: 800 mm Head • Head model: Manual universal • Tool clamping: Hydraulic • Taper: ISO 50 • Speed range: 25 – 3,250 rpm • Mandrel power: 16 Kw Machine feeds • Working progress: 5 - 5,000 mm/min • Fast feeds: 8,000 mm/min Weights and dimensions • Max. weight on table: 3,000 kg • Approx. machine weight: 10,000 kg • Machine dimensions: 4,920 x 2,714 x 2,417 mm
bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; testing is possible by prior arrangement. Max. turning diameter 280 mm; Max. turning length 550 mm; Swing over bed 570 mm; X / Z travel 241 / 640 mm; Y-axis travel ±50 mm (total 100 mm); X / Z rapid traverse 30 / 30 m/min; Bar capacity 61 mm; Spindle interface A6; Max. spindle speed 4,700 rpm; Spindle power S1 / S6 (40%) 20.9 / 27 kW; Torque S1 / S6 200 / 257 Nm; Turret 12 positions, VDI 40; Driven tools: Yes; Driven tool speed 4,000 rpm; Driven tool power 8 kW; Driven tool torque 40 Nm; Tailstock: Yes, Morse 5; Max. workpiece weight 350 kg at max. 1,000 rpm; Dimensions L × W × H 3,875 × 2,122 × 2,345 mm; Machine weight approx. 7,700 kg.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 11 kW weight of the machine ca.: 4,450 t dimensions of the machine ca.: 3830 x 1160 x 1180 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 24mm total power requirement: 45+22 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 37 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 15 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 1850 x 1550 x 1685mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New knives! Auction-ID: A1-40982-104
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 35mm total power requirement: 45+22 kW weight of the machine ca.: 35 t dimensions of the machine ca.: 5684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 40mm total power requirement: 2x37+30 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6085 x 2630 x 2787mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 50mm total power requirement: 45+45 kW weight of the machine ca.: 72 t dimensions of the machine ca.: 6370 x 3240 x 3660mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 10mm total power requirement: 15 kW weight of the machine ca.: 10,6 t dimensions of the machine ca.: 5310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 30 kW weight of the machine ca.: 15,15 t dimensions of the machine ca.: 5010 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
With three interpolation axes, the machine is able to perform all kinds of recesses, grooves, spiral cuts, etc. All this thanks to simple, intuitive and versatile multilingual software. The machine height is 310 mm with the automatic rotary indexing table. By installing a protective cover, the user can fully open the machine to facilitate the loading and handling of medium-sized parts. It creates recesses from 3 to 100 mm (workpieces up to a diameter of approx. 600 mm). A lower guide rail provides additional rigidity for demanding tasks. Premium It has an automatic rotary indexing table that offers extensive configuration options. Maximum workpiece height: 310 mm · PLC with touch screen to control cutting and feeding speed as well as table rotation · Suitable for the production of workpieces with multiple notches or grooves (both internal and external): straight, conical ...
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1160 x 1000 x 1175mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 90 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 6500x5300x3750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13 total power requirement: 15 kW weight of the machine ca.: 8,84 t dimensions of the machine ca.: 4760 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 4mm total power requirement: 5,5 kW weight of the machine ca.: 2920 t dimensions of the machine ca.: 3600 x 970 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
with Fanuc 0i TF Plus Capacity : Max. Swing Slide 1350 mm Max.Turning Dia x Height 1250 x 150 mm Standard turning Dia x Height 800 x 835 mm Max. Job weight including Fixture / Chuck 2000 kg 1.2 Table Spindle Drive with Gear Box: Spindle Tapper Straight locating Dia 160 mm Front bearing diameter Dia 500 mm, Dia 300 mm Spindle speed range 10 - 250 rpm Spindle power, S1 / S3 22 / 30 kW Spindle Torque S1 / S3 2495 / 3400 Nm Spindle range for spindle constant power 84 - 250 rpm 1.3 Axes Drive : Traverse X/Z 675 / 850 mm Rapid Traverse rate 16 m/min 1.4 Turret (Hydraulic) : Turret number of station 12 Nos. Tool Shank 32 mm Boring Tool Holder Dia 60 mm IFTD with boring bars in adjacent pocket 260 mm IFTD with boring bars at 60deg pocket No Tool in adjacent pockets 560 mm 1.5 General Details : Coolant tank capacity 300 ltr Hydraulic power pack ...
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm (s) total power requirement: 30 kW weight of the machine ca.: 13950kg t dimensions of the machine ca.: 4510 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 18,5 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 4760 x 1660 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 30 kW weight of the machine ca.: 18,3 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 37+22 kW weight of the machine ca.: 39 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1 mm
Notching machine Make: Euromac Type: 220/6 R Year of Make: 1999 Material thickness: 1-6 mm -Hydraulic knife clamping device, with 2 hydraulic cylinders -Cutting unit with 3 guides -Reversible blade, means: positive cut: start of cutting at the front negative cut: start of the cut at the back -Variable and infinitely variable cutting angle adjustment -Stop rails with adjustment Weight: approx. 1000 kg Condition as good as new, because almost not used. No guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.
angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 55+15 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 3850x3050x82800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 2,35 t dimensions of the machine ca.: 1580 x 1200 x 1410 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 30 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2000x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 Gebr. Tube bending machine Tubomat 42 mm with accessories Technical data: Working range / pipe diameter: 6 to 42 mm as standard Max. wall thickness: approx. 3 mm to 3.25 mm (depending on material and tube diameter) Pipe push-on length (attachment length): Approx. 1,500 mm as standard Drive power: Electro-hydraulic drive with approx. 1.5 kW to 2.4 kW Electrical connection: 400 V / 50 Hz (three-phase current) Machine weight: approx. 600 kg to 1,000 kg (depending on table and fence length) ⚙️ The 4 main integrated functions (complete machining) Bending: Electro-hydraulic bending process with hydraulic pipe clamping, sliding piece adjustment and programmable or pre-selectable bending angle control (with mandrel retraction to prevent pipe kinking). Saws: Integrated pipe cross-cut saw (circular saw) for right-angled, clean cuts incl. coolant device. De ...
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 22 kW weight of the machine ca.: 16,65 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978
Machine type: Parts washing machine Manufacturer: Bio Circle Type: HTW II 1000 IS Year of Make: 2015 Condition: used / very good, as hardly used Offer will only be sent if a complete imprint is provided! Price 6.500 Euro incl. 19% VAT Location Warstein , Germany Reference number M-BIO-0926 DESCRIPTION We offer you a used parts washing machine from the manufacturer BIO-CIRCLE Basket diameter 975mm Payload 250kg Basket drive and heating. Exhaust fan see last picture for more data. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your complete contact details in order to receive an offer with our terms and conditions of payment. Errors in the descriptions and offers are reserved
maximum number of results exceeded
please refine your search
2.500 € 
