filtr used for sale

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Key data: 750 mm, 600 mm, 520 mm

5-Axis Vertical Machining Center DMG DMU 70 eVo linear NEW DESIGN Year of construction 2010 Heidenhain MillPlus IT CNC 2-axis NC swivel rotary table : Axis of rotation: C-axis 360° x 0.001° Swivel axis: B-axis 102° x 0.001° Table size: Ø 700 x 500 mm Table load: max. 350 kg Longitudinal travel: X 750 mm Transverse travel: Y 600 mm Vertical travel: Z 520 mm Feeds up to: X 80,000 mm/min. Y/Z 50,000 mm/min. Rapid traverses up to: X 80,000 mm/min. Y/Z 50,000 mm/min. B/C 40 rpm. Spindle: Spindle drive power: 35/25 kW Spindle speeds: 20 - 18,000 rpm. Tool magazine positions: 120-fold Tool holder: HSK-A63 Tool diameter with/without adjacent tools: 80/130 mm Tool length: max. 300 mm Tool weight: max. 6 kg Machine weight: approx. 8,500 kg Machine height: L/W/H 6,000 x 5,200 x 2,900 mm Accessories: Full fairing. Production package. IKZ 40 bar, 2 ...

Technical documentation Operation-system.pdf Description of the unit Complete 3-stage micronisation system with air classifying unit including : 1 - Container emptying station - Lifting jib / crane for positioning and turning container. - 1 x Stainless steel powder container - Powder emptying system: synchronisation and tight opening of the container in order to empty the powder into a storage hopper. 2 - Micronisation unit - Bepex Pulvocron PCS 10 mill and classification The Pulvocron air classifying mill utilizes high-speed impact and internal particle size classification to produce fine powders with a narrow size distribution. Adjustable operating conditions, including tip speed, air flow, and classifier speed provides control over resultant particle size, material temperature, and capacity. Thermally conditioning the inlet air stream provides optional heating to ...

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Key data: 400 mm, 700 mm, 400 mm

Inv. Num. : 7008 Type: BA400-2 Producer: SW Created: 2011 Parameters: Control system: Siemens - Sinumerik 840D Number of stacking positions: 120 Maximum spindle speed: 17500 1/min X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Cone: HSK63 Equipment: IKZ Conveyor High Pressure Pump Filtration Knoll 1x two-seater 5th axle W1W2 on U-side (manufacturer SW) Laser Inspection of Broken Tools

Dairy Machinery UK officially offers E-SPIN Dairy Centrifuges In the regions of United Kingdom ,Ireland and Greece. We offer sales, installation, maintenance and stock holding of spare parts for quick response to all of our customers. Whenever it is necessary to separate liquids or remove ultra-fine particles, and when traditional filtration methods reach their performance limits, disk stack centrifuges are exactly what you need to achieve the best results…. Trailblazing designs, consistent and innovative research, superior materials and complete sharing of expertise, thanks to a lean and flexible structure: these are the key ingredients in our approach. They allow us to focus directly on our most important objective: maximum machine efficiency performance and total satisfaction for you. Al components are manuractured to the highest quality and safety standards.  ...

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current bra number only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for th ...

HAAS VF-3 BHE machining center Description Machine in service, regular maintenance. Travel X Y Z, 1016x508x635 - Table load 1588kg - Table dimensions 1219x457 Spindle/table nose 102 - 737 15kW motor - BT40 cone 10000rpm option 24+1 tool side changer option. UGV option TSC 21bar spindle center coolant option with auxiliary filtration. 4th axis connection preparation option. Year 2009 Number of hours machining cycles: 11660 Number of hours under power: 13000 Weight 6t300

Roders RXP600 DSH Precision High Speed ​​CNC Milling Center Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm Distance from spindle nose to table: 515 mm Tool magazine: 28 positions Overall dimensions in transport position: W 2300 × D 2800 × H 2920 mm. Total weight: 10200kg. Spindle Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany) Power: 14 kW, 3000-42.000 rpm Tool holder HSK 40: Maximum tool diameter: 16 mm. Desktop Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis. A-axis tilt range: +/- 115 degrees. C-axis tilt range: +/- 360 deg. Workpiece weight: 200 kg. T-slot table size 340 × 340mm (ø400) Groove width: 12mm. Distance between grooves: 45 mm. Linear motors: all axes Cooling of the main a ...

BAW04-42 o SIEMENS 840 Powerline o 4 Spindeln ; 2 Pallets o Workpiece Hydraulic Clamping 250 bar o Tool Magazine 232 pcs o Chip Conveyor o CTS 70 bar o Automatic Machine Cleaning System o Automatic Loading Door o Tooling Control B77mnnk9r7 o Fire Extinguisher System o Oil Mist Collector SCAN Filter Serien Nr. 454339 This machine has been used in serial production of ABS Alu Housings. All the fixtures, and tooling are available with the machine. The machine setup can be changed for any other different type of part. It was used only with oil cooling, and the general condition for the machine is very good. A total package of 3 identical machines are available incl one central oil filtration system.

The AJAN SHP 260 A plasma cutter was built in 2010 in Turkey. The machine is in continuous operation. I am selling due to upgrading to a newer model. Characteristics of the AJAN SHP 260 A plasma cutter - cut materials: structural steel, stainless steel, aluminum - maximum cutting speed: 15 m/min - maximum sheet size (length x width): 6 x 2 m - minimum cutting thickness (structural steel): 0.5 mm - maximum cutting thickness (structural steel): 60 mm - minimum cutting thickness (stainless steel): 0.8 mm - maximum cutting thickness (stainless steel): 20 mm - minimum cutting thickness (aluminum): 1.2 mm - maximum cutting thickness (aluminum): 25 mm - total power requirement: 52 kW - power of the plasma source: 260 A Equipment of the SHP260l plasma burner - CAD/CAM software: AJANCAD, Lantek Pulsar - machine plasma source: AJAN PP 260 A - autopsy and extraction table with ...

- table is 12x2 m - air filtration sistem is in the price (TAMA - Italy) - 8 cylindrical filters - the filters currently installed inside are only 6 months old - it has a possibility of self cleaning the filters

Phenix RS LT CUT 2040 plasma cutting machine With POWERMAX 125 GENERATOR Hypertherm Plasma Torch - Set Harnesses, Hypertherm cables and voltage divider board - Altitude control feeler and Hypertherm anti-collision - Mechanically welded machine frame, rectified on machining center - Machine frame with 4 PANASONIC Motors / Brushless encoder 15003000 Double motorization in X - Automatic game catch-up between rack and pinion - Precision gearbox, guides and racks - Smoke suction trays compartmentalized - Removable slag collection trays by the side - Electrical cabinet - PHENIX Numerical Control TECHNOLOGY - Industrial PC -Laser pointer - 3 axis wired joystick -Pneumatic dot peen marker - Central suction and filtration of smoke EASY 3 7.5 KW -Pre separator (spark trap)

control The Sinumerik 840D CNC; CO2 slab laser. Material max thickness mild steel 20mm, stainless steel 10mm, aluminium 8mm; chiller, filtration unit. Laser source - ROFIN. Optics - precitec. X and Y axes with linear motors, with travel speed up to 200 m/min. Machine well maintained. Machine currently under power. Aviable for inspection any time.

Application: Tangential flow filtration (TFF) on an industrial scale. Produced by Cytiva (formerly Pall Lab) in 2014. Unit No./TFF Project Number 2 TFF system - Designed for the biotechnology and biopharmaceutical industries Max allowed pressure (PS) -1/6 bar Min/Max Allowed Temperature (TS) -10/45 C The machine after disassembly from the working production line. Data: Weight 1600 kg Length 2.30m x width 1.20m x height 2.20m Power supply 3-phase + 1-phase + compressed air

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-63A DIN 69893 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minDirect measuring systemDirect path measuring systemSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel ra ...

grinding length: 700 mm grinding width: 330 mm workpiece height: 255 mm distance spindle center to table: 460 mm distance grinding wheel - table: 385 mm grinding wheel size: 355 x 25, Bohr. 127 mm table-size: 600 x 300 mm number of spindle speeds: 1450 UpM rapid traverse vertical: 480 m/min cross feed: 1000 mm/min table speed -stepless-: 1-25 m/min spindle drive: 2,2 kW total connected load: 4 kW weight of the machine ca.: 1,6 t range L-W-H: 2 x 2 x 1,8 m dimensions of the machine ca.: 2,5 x 2,5 x 1,8 m CE signed: Electric 400 Volt: Magnetic plate: 600 x 300 mm Cooling unit +paper filtration +Magnetic separator: 1 x 0,9 x 0,6 m Seperate hydraulic equipment: 0,6 x 0,4 x 0,4 m Draw-off device: auf Spindel Hydraulic surface grinding machine with control panel, digital display, computer-aided automatic Depth feed AD I, electromagnetic chuck on/off, rapid feed vertically + transversely, dem ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30Clamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine WheelNumber of tools 15TableTable surface 740 x 420 mmMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery!Chip removal package with chip conveyorChip removal package with chip conveyor conte ...

Complete filtration system Diatomaceous earth filter + dosing + tanks + cutting block Schenk. Kaspar Schulz / Deutschlank Capacity 12 H/h Year of construction 2001 Wetere and prices on request

Silberhorn 6-Station Rotary Table System In this rotary table cleaning system, the cleaning processes run in parallel and in the highest quality: Station 1: Loading and unloading Station 2: Cleaning with tank 1 Station 3: Rinsing with tank 2 Station 4: Rinsing with tank 2 Station 5: Pre-drying with side channel compressor Station 6: Vacuum drying This is what makes this 6-station rotary table system so powerful and ideal for cleaning large series. Installation area: approx. 3,600 mm x 3,530 mm x 6,900 mm (W x H x L) Goods window: approx. 450 mm x 300 mm x 150 mm Areas of application: Cleaning of series and large series Doors of the stations equipped with safety glass – this facilitates process observation Cleaning cycles of less than 30 seconds can be achieved Goods windows also for large parts Very robust and precise design of the system. This makes it possible to ...

Key data: 400 mm, 700 mm, 400 mm

Inv. Num. : 7006 Type: BA400-2 Producer: SW Created: 2008 Parameters: Control system: Siemens Sinumerik 840D Number of stacking positions: 120 Maximum spindle speed: 17500 1/min X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Cone: HSK63 Equipment: IKZ Conveyor High Pressure Pump Filtration Knoll 1x two-seater 5th axle W1W2 on U-side (manufacturer SW) Laser Inspection of Broken Tools

Inv. Num. : 7007 Type: BA400-2 Producer: SW Created: 2010 Parameters: Control system: Siemens - Sinumerik 840D Number of stacking positions: 120 Maximum spindle speed: 17500 1/min X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Cone: HSK63 Equipment: IKZ Conveyor High Pressure Pump Filtration Knoll 1x two-seater 5th axle W1W2 on U-side (manufacturer SW) Laser Inspection of Broken Tools

Fat baking station Heating coilless grease baking appliance for 200 pcs/hour doughnuts / doughnuts with reversible basket and baking basket and drip tray Filtration Connection 400V, 16A-CEE plug Used equipment for export More fat baking equipment in stock!

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Coating unit with chambered doctor blade system (12 cm³/m²) Extended delivery (X3) Double sheet detection - electronic Pull lay control - electronic Hycolor Ink- and Dampening System (Multidrive) Preset Plus feeder Preset Plus delivery Speed Sheet/h (18000) Prinect Press Center (XL2) Autoplate XL (simultaneous) (2) Water cooled peripherals StaticStar - Antistatic device with foil package (Advanced) CoatingStar - coating supply (Compact) CombiStar - Dampening solution conditioning + ink unit temperature control (CAN) FilterStar - two-stage filtration system (Compact) InkStar - automated ink supply DryStar Combination - IR and hot air dryer DryStar UV - UV delivery dryer DryStar UV - UV interdeck dryer (x2 (80-200 watt/cm)) InsertStar - tape inserter PowderStar - powder sprayer (AP262) Prinect Inpress Control 2 Preparation for retrofit with interdeck dryers (all units / alle Werke) Press ...

Complete Bottling Line PET • Year: 2015 • Speed: 3.000 Bph • Type of product: Natural Water • Formats: 6 LT • Composed of: • Blower STM • Model: BLU LINE 3 • Number of cavities: 3 • Elevator/Orientator preform • Booster HP from 10 to 30 Bar • Compressor LP 10 Bar • Chiller • Formats: 6 L (1 Stamp available) • Triblock STM • Model: ARROW 16/16/6 NC/BIG • Rinser 16 clamps • Filler 16 valves • Type of filling: Gravity filling • Capper 6 heads - magnetic heads • Type of cap: pre-threaded plastic • Cap: 48 mm BERICAP • Automatic cap feeder • CIP Sanification 2015 • Filtration system with filters HEPA • Format of 6L included • Labeller UNO ADE (2016) • Direction: Linear • Type of labels: adhesive • Type of apply: enveloping • Handler Ersey Makina • Automatic distributor • Palleti ...

Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts documentable bottle sizes 85 88 90 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante This isobaric filler is immediately available and delivered in case of purchase We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine How to build one isobaric triblock The isobaric filler c ...

Used Cold aseptic filler KHS Alfill 2005 The Used Cold aseptic filler KHS Alfill 2005 is a reliable and well maintained bottling line that is currently for sale It was shut down 2 years ago but is still in good condition and ready for immediate use The machine is designed to fill PET CAF bottles with a neck diameter of 38mm and a bottle diameter of 50 95mm and height of 120 360mm It has a capacity of 12 000 BPH for both 0 33 and 1 5L bottles and can handle two formats for each size This means that it is capable of filling a large number of bottles quickly and efficiently The machine is equipped with 24 heads for sterilization 60 for drying 48 for filling and 12 for closing bottles This ensures that the bottles are properly sterilized and dried before filling and that they are sealed securely after filling The KHS Alfill 2005 is capable of filling still drinks with fruit purees of up to 0 ...

Used Syrup Room 15 000 Lt h PROGECO 2003 This is a used Syrup Room from PROGECO a well known manufacturer in the industry The model is SS 450 and was manufactured in 2003 It has a speed of 15000 liters per hour making it a suitable option for high volume syrup production Currently the Syrup Room is in a ready to operate state and comes equipped with necessary safety features to ensure secure operations Additionally manuals are provided to facilitate easy installation and maintenance The Syrup Room runs on V 380 kW 37 and Hz 50 electrical data making it a reliable option for powering large scale syrup production operations With its high speed capacity and reliable performance this used Syrup Room from PROGECO is an ideal solution for any syrup production facility Technical Data 4000 liter agitator sugar dissolving tank dissolution exchanger plate heat exchanger for 12 000 liters for heat  ...

Used Automatic Microfilter Innotec 1997 INTEC MICROFILTER NOW INNOTEC Automatic Microfilter year 1997 CE marked INNOTEC on SKID dimensions 3 7m x 1 5m Process speed at 10 000 bottles h controlled with litre counter 3 Housings of microfiltration 12 candles 30 and one of 40 Connection code 7 2 Housings for water filtration for rinsers and washes with 5 candles 30 connection code 7 Siemens S7 PLC with network card for remote control with VPN expandable because it was replaced with a more powerful one because it was full new operator panel Bubble test with automatic drains and TEST OK report in order to have the machine ready to start in the morning Steam inlet to sterilize the filler with automatic valve and inserted in the cycles that can be modified Weekly programming of washing starts production cycles sanitization sterilization membrane washing all modifiable Automatic DOSATRON pumps fo ...

Used Automatic Microfiltration Plant Sifa 2011 Are you in need of a reliable and efficient microfiltration system for wine and water filtration Look no further than the Sifa Automatic Microfiltration Plant With its exceptional performance and advanced features this plant offers optimal filtration results making it the perfect choice for your filtration needs High quality Microfiltration Solution by Sifa for Optimal Filtration Results One of the key highlights of the Sifa Microfiltration Plant is its ability to deliver high quality filtration Equipped with three chambers specifically designed for wine microfiltration and two chambers for water microfiltration This plant ensures the removal of impurities and particles resulting in superior filtration outcomes Advanced Features and Automation for Seamless Operation and Control Thanks to its advanced automation system the Sifa Microfiltratio ...

Used Cross Flow Filer SEFILTRA up to 3000 L h Introduction to Cross Flow Filtration Firstly the SEFILTRA cross flow filtration is a cutting edge solution in the bottling field This specific model the BF2 S SEF produced in 2020 stands out for its capacity to process up to 3000 liters per hour Moreover cross flow filtration uses organic membranes for optimal efficiency representing an advanced and reliable technique in liquid treatment Technical Features of the BF2 S SEF Furthermore the BF2 S SEF by Sefiltra is currently in production and continues to demonstrate its efficiency and reliability With a filtration speed of 3000 L h this system is ideal for medium volume applications Additionally the organic membranes used in the cross flow filter allow for an effective and gentle separation preserving the liquid s qualities intact Safety and Documentation of the Cross Flow Filer SEFILTRA Safe ...

Filtration plant, Fabr. Seitz Orion, 100 x 100, for 180 hl/h, factory overhauled in 2002, consisting of: - Diatomaceous earth frame filter, with 29 KG frame in stainless steel, external risers, sight glass fittings with pressure gauge, with KG discharge tray with screw in stainless steel, with KG dosing device - Sheet filter, with 150 VA plates, external risers, sight glass fittings with pressure gauge - Control platform between both filters, step at the KG filter - Control cabinet

Grinding area 1,320 x 730 mm, SIEMENS PLC control with touch screens, -Auto. Straight dresser with dimension compensation and v-constant, - paper tape filtration system, - EPT Electro Permanent Clamping Plate 1200 x 500 mm, - Glass scale Z-axis, - max. table load 1,400 kg, - max. distance between magnet and disc 450 mm, - Machine dimensions: L 3310 x W 2030 x H 2250 mm, - Machine weight 4,500g - Machine is still energized. - Price: free loading

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

amount: 1 STK height: 450 mm external diameter: 340 mm Filter cartridge/3-5µm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil filter element Mann filter element for oil of the highest quality for wire erosion, die sinking and spark erosion drilling. The Mann + Hummel H 34 2240/40 KIT oil filter element reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers protection and is used for the filtration of engine, hydraulic and gear oil. Technical data Height: 450 mm Outer diameter: 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Gantry Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L5600 Year of construction: 2009 CNC Control: Global Control Plus Track width: 5,600 mm Raceway length: 21 m on HEB beams Equipment: 1 x Skew Rotator Delta with plasma torch Power source Kjellberg HiFocus 360i Skew Rotator DELTA - is based on one of the most successful Plasma chamfering units worldwide - Compact design for maximum Effective working width - C-axis rotation +/- 450° - Bevel cuts from -45° to +45° 4 oxy-fuel burner trolleys 3 equipped with ALFA burners Extraction table Beuting Dimensions: 4,200 x 18,200 mm Donaldson Torit filtration system

General SKU062B447 LocationBarneveld MakeTechno-G Solids Zutphen Year of construction1998 Pressure Working pressure10 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1500 Ltr. Pressure10 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4301 (304) Capacity1500 Ltr Vessel sizesdia. 1200x1000mm Dished topConical bottom Outletdia. 200mm Information Mounted on legscheck Floorspace1,2x1,2 M Total height3,3 M Weight850 KG Extra Specifications- With candle filter make Pall, type Filtroplast 70/50 Pressure vesselsTechno-g SolidsTanks > Pressure vesselsBrand > Techno-g Solids What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

General SKU373S899 LocationBarneveld MakeNetzsch Filtrationstechnik GmbH (D) TypeFigur-Nr. 021 Größe 14 No.040002268 Year of construction2003 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface4.75 m2 Specified Features - Filterpress Filter presscheck Filter surface4,75 m2 Recessed chamber platescheck Number of platens24 Internal platen sizes315x315mm External platen sizes400x400mm Platen thickness50mm Frame thickness13mm Cake capacity61 ltr. Central inletdia 23mm Connectionsdia 20mm (4x) With outlets on platensdia 15mm Hydraulic closingcheck With hydraulic unithandpump MaterialPolypropylene Information Total height1,7 M Weight850 Kg CEcheck Floorspace3,2x0,9 M Extra Specifications24 additional plates without liquid outlet FilterpressesNetzschFilters > FilterpressesBrand > Netzsch What you can expect from Foeth:  ...

General SKU289P505 LocationBarneveld MakeSartorius (DE) TypeSARTO / MF / M38 and SARTO /CIP No.3/30/001/6 and 3/30/003/6 Year of construction1996 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel Filter surfaceUnknown Information Floor space2.3x1.2 M Total height1.4 M Weight350+200+150+200 KG Extra Specifications1 Centrifugal pump brand unknown 1 pipe heat exchanger length 2000 mm with 7 pipes approx. 25 mm internal total heated surface area 1.25 m2 19 spare plate filters Pall Filtron cassette type NOVA NMWL: 5K 1 Danfoss HVAC DRIVE controller type VLT 3516 HV-AC 380-415 Volt 1 spare filter Pall Membralox Performance according plant information was uptop 70 m³/h @3-5 bar. ( product Heparin ) Miscellaneous filtersSartoriusFilters > Miscellaneous filtersBrand > Sartorius What you can expect from Foeth: -- Machine is in ...

General SKU043R201 LocationBarneveld MakeEllerwerk TypeWFZ 630 No.90.005 Year of construction1991 Main Features MaterialHastelloy Motor22 KW Inlet diameter630 mm Specified Features - Basket centrifuge Basket centrifugeBasket on horizontal shaft Basket sizesDia. 630x230mm Wall thickness10mm Max. loading weight100 Kg With scrapercheck Hydraulic operatedcheck Liquid outletwith filtrate cyclone Motor22 kW, 380 Volt (Ex) Max. basket speed2000 rpm MaterialStainless steel 2.4602 (Hastelloy C-22) Information ATEX compatiblecheck Extra Specifications- Inverting bag centrifuge Basket centrifugesEllerwerkCentrifuges > Basket centrifugesBrand > Ellerwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...

General SKU373S901 LocationBarneveld MakeAndritz Filtrationstechnik GmbH (D) TypeFigur Nr. 021 Größe 14 No.C20802361 Year of construction2007 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface8.9 m2 Specified Features - Filterpress Filter presscheck Filter surface8.9 m2 Number of platens45 Internal platen sizes315x315mm External platen sizes400x400mm Platen thickness47mm Frame thickness13mm Cake capacity115 ltr Central inletdia. 25mm Hydraulic closingcheck With hydraulic unithandpump With feeding pompAlmatec membranepump MaterialPolypropylene Information Floorspace3,3x0,9 M Total height1,7 M Weight900FilterpressesAndritz SeparationFilters > FilterpressesBrand > Andritz Separation What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...

Used Ackey SEA 6 Filter up to 12000 lt h Introduction to Filtration Technology of the Ackey Filter SEA 6 In the industrial bottling sector firstly choosing the right filtration system is crucial It ensures the final product s quality and purity The Used Ackey SEA 6 Filter it s a high level microfiltration option capable of processing up to 12000 liters per hour Consequently this makes it an efficient and effective solution for filtration needs Technical Specifications and Capacity Currently in storage the Ackey SEA 6 was produced in 2011 by the renowned manufacturer Ackey Specifically this model SAE 6 X 40 is notable for its filtration speed reaching 12000 L h Hence it proves to be an excellent choice for facilities requiring high processing volumes without compromising quality Advanced Filtration Technology Regarding technical details the system reveals that the filter type used is a ho ...

Universal compact dust extraction system with compressed air cleaning., Additional title: for kieselguhr dust, Capacity: 1800 m3/h, Filtration area: 15 m2, Power: 3 kW, Current: 6,3 A, Voltage: 400 V, Frequency: 50 Hz, Length: 550 mm, Width: 2178 mm, Height: 550 mm, Weight: 140 kg

Plant for rinsing and chemical regeneration of a beer post-filtration., Additional title: cleaning system for secondary beer filtration, Volume caustic vessel: 600 l, Volume disinfektion vessel: 1000 l, Volume water vessel: 1000 l, Material: caustic vessel: 1.4401; disinfection/water: 1.4301, Base construction: part for caustic: on frame with 4 dome feet; disinfection/water: on frame with 6 dome feet, Features: part for caustic: caustic vessel, thermometer, heating coil, dosing vessel, conductivity measuring device, centrifugal pump disinfection/water: disinfection vessel, water vessel, Hilge Hygia II centrifugal pump: 4 kW, 20 m³/h, Periphery: control cabinet with Simatic OP7 touchpad

Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers., Capacity: 120 hl/h, Plate size: 100 cm edge length, Length: 7000 mm, Width: 1500 mm, Height: 1500 mm, Position: horizontal, Base construction: mounted on steel frame, standing on feet, Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel. Option 1 - Combination filter Option 2 - Kieselguhr filter Option 3 - Sheet filter, Capacity approx.: 850 hl/h Kieselguhr filter - filtration area approx. 174 - 242m2, Operating pressure: 8 bar , Power: 6 kW, Voltage: 220/380 V, Frequency: 50 Hz, Length: 10100 mm, Width: 1320 mm, Height: 1750 mm, Formats: Quadratic filter elements, Operation / Control: Built-in control panel, Material: Stainless steel, Position: Horizontal, Base construction: Frame, Features: Filter plates; filter frames; re-routing plate; collection tray with removal screw; hydraulik filter plate compression; hose pump, Layer patterns: Vertical row arrangement