141,784 used machines on RESALE, but how to find them? Machine Search
pressure: 63 t throat: 300 mm stroke: 8-140 mm no. of strokes: 70 Hub/min ram - range of adjustment: 100 mm table surface area: 750x620 mm ram surface: 500x340 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 2100x1500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:16 t distance between columns:450 mm stroke:350 mm total power requirement:3 kW dimensions of the machine ca.:1,2 x 0,8 x 2,5 m
pressure:2 t dayligth:80 mm Center of spindle to wall or column:100 mm weight of the machine ca.:0,5 t dimensions of the machine ca.:0,8 x 0,6 x 2,0 m Hand operated fly press, with center turning device appr. 100 x 400 mm length - Handwheel diameter 600 mm
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm
Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine
pressure:10 t distance between columns:450 mm :1500 mm table-size:450 x 400 mm weight of the machine ca.:470 kg dimensions of the machine ca.:1400 x 750 x 1600 mm
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden
pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden
pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:20 t Stroke:230 mm table surface area:Ø600 mm distance table - lower edge of ram:770 mm weight:595 kg
weight of the machine ca.:620 kg dimensions of the machine ca.:1000 x 920 x 1550 mm
2018 Type: 101-60 Machine No.:108141 electric double eyelet device with foot switch for inserting 2 eyelets at a fixed distance of 28mm Punches holes and eyelets in one operation. Eyelet type 8E, 8E 4long and 8E 5long Inner diameter 5.50mm Insertion depth 60mm Paper thickness 2 to 15 sheets (8E), 2 to 20 sheets (8E 4long) 5 to 25 sheets (8E 5long) Automatic eyelet feed via magazine Weight 49kg Available: immediately Located: Germany
Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm
nominal force:100 t stroke:320 mm no. of strokes:35 /min distance between columns:360 / 250 mm Distance table/ram, max. stroke up, adjustment up:500 mm table surface area:320 x 450 mm table height over floor:660 mm ram surface:250 x 280 mm spindle diameter:125 mm power capacity:3,0 kW weight:4,5 t Dimensions (WxDxH):2,0 x 1,6 x 3,1 m
pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary
Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg
pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m
nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m
pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
no. of strokes:150 /min impact energy:420 kJ distance lower die block / ram gudeway:435 mm Throat:425 mm steel forging - rectangular up to:110 mm steel forging - diameter up to:125 mm power requirement:22,0 kW weight of hammer:3,9 t weight of anvil:3,0 t ram hammer weight:200 kg weight:6,9 t dimensions (WxDxH):1,1 x 2,3 x 2,4 m
Palamine 80ton Upstroke Press (hot press) Platen size: 1525x1150 Daylight gap between top and bottom platen 185cm Max. temperature on platens 600 degrees Type of platen heating Electric 240V Overall footprint size 2160cm x 1525cm
pressure: 100 t throat: 325 mm stroke: 10-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 80 mm table surface area: 900x630 mm ram surface: 500x315 mm hole in the table: 325x225 mm table height: 800 mm tool hole in ram: Ø 50 mm dimensions: BxTxH mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min ram surface: 800x550 mm hole in the table: Ø 150 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 7-axis TRUMPF TruBend 5130 was manufactured in 2011. It has a capacity of 3100 mm and 130 tons, featuring a Wila hydraulic upper and lower clamping system and a bending aid. The machine is equipped with CNC-controlled back gauge for X, R, Z1, and Z2 axes. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5130 press brake we have for sale. Contact us for further details.
CONTROLS conventional PRESS FORCES total force (nominal): 100 to SLIDE stroke rate (max.): 55 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 10 mm stroke max.: 120 mm DIMENSIONS / WEIGHTS total weight approx.: 4800 kg
Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t
Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible.
Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 630 t passage width: 1390 mm stroke: 400 mm table surface area: 1390x1250 mm total power requirement: 75 kW weight of the machine ca.: 36 t dimensions of the machine ca.: BxTxH 3200x2800x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 8 t throat: 115 mm stroke: 8-56 mm ram - range of adjustment: 30 mm table surface area: 390x230 mm ram surface: 155x125 mm hole in the table: 105x75 mm table height: 820 mm tool hole in ram: 35 mm weight of the machine ca.: 800 kg dimensions of the machine ca.: 1000x1000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 275 mm stroke: 150 mm table surface area: 860x550 mm ram surface: 600x400 mm table height: 810 mm tool hole in ram: Ø 50 mm dayligth: max. 475 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 2000x2500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t distance between columns: 600 mm stroke: 150 mm table surface area: 600x410 mm ram surface: 220x130 mm table height: 850 mm weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 16 t throat: 185 mm stroke: 8-60 mm no. of strokes: 140 Hub/min ram - range of adjustment: 50 mm table surface area: 500x340 mm ram surface: 230x155 mm hole in the table: Ø160 mm table height: 800 mm hole in the table: Ø35 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1200x1200x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
