filter press used for sale

TECHNICAL DATA: ENTRANCE: Rated voltage: 400 V ± 15% Frequency: 48–52 Hz OUTPUT: Nominal voltage: 400 V ± 3% Rated power: 12 kVA

Depending on the starting material, material moisture and piece size up to 60 t/h

NANOFILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION, WHEY CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

Extraction system Spänex -as good as new - SPÄNEX extraction, filter and transport system with clean air side Arranged extraction fan with max. 27000 m³/h air output Year of manufacture 2023 CE As good as new – only approx. 20 hours of operation Filter type: FA V/2000-VE-630-37-B-V-F-6-2,2 Filter area 180 m² Filter air flow max. 27000 m³/h Residual dust content less than 0.1 mg/m³ Mode of operation discontinuous Chip buffer volume 6 m³ Motors: 1 x vibration – 0.16 kW, 1 x discharge 2.2 kW, 400 V / 50 Hz Dimensions: L 2.9 x W 2.9 x H 7.3 m Built-in fan type: SU-630-A003-37-M Volume flow max. 30,000 m³/h Total pressure difference max. 4500 Pa Operating point 27000 m³/h Total pressure difference 3800 Pa Fan efficiency 86 % Power requirement 33.5 kW Exhaust fan soundproofed Motor power 37 kW 400 V/50 Hz, IE 3 Weight approx. 5800 kg (with filled chip contai ...

Industrial Electric Motor-Driven Pump Assembly Used industrial pump assembly comprising a three-phase electric motor, coupling or bearing housing and cast pump body. The configuration is suitable for centrifugal or transfer pumping of water and other low-viscosity liquids. Machine type: Electric motor-driven industrial pump Drive: Three-phase electric motor Pump configuration: Cast pump body with coupling or bearing housing Features: Protective motor fan cover, electrical terminal box and pump pipe connection Approximate dimensions: 950 x 400 x 450 mm Approximate weight: 90 kg The pump assembly is offered in used condition, untested and with operation unknown. Visible wear includes heavy dirt, chipped paint, surface corrosion, oxidized fasteners and contamination from prolonged storage. The motor, pump housing, coupling, bearings and electrical connections require in ...

rate of flow: 250 l/min accumulator pressure: max. 8 bar range L-W-H: ca. mm Shipping weight: ca. 600 kg Packing: ca. m Osmosis System Complete water treatment system with dual softening, two IBC tanks, and control system, still installed, documentation available, viewing possible The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edelstahl-Filterkerzen 316L von NORDFILTER Äußerst robuste Konstruktion und hohe mechanische Festigkeit. Für aggressive Lösungsmittel sowie viskose und heiße Lösungen geeignet. Rückspülbar, Reinigung mit chemischen Lösungsmitteln, heißem Wasser oder Dampf möglich. Lange Standzeit, die plissierte Ausführung bietet eine größere Filtrationsfläche. Typische Anwendungen: Dampffiltration. Vorfiltration und Entkarbonisierung hochviskoser Flüssigkeiten. Entfernung von Verunreinigungen aus Flüssigkeiten in der petrochemischen Industrie. Filtration aggressiver Lösungsmittel. Reinigung stark korrosiver Flüssigkeiten und Gase. Filtration von Flüssigkeiten und Gasen bei hohen Temperaturen und Drücken. Technische Daten: Werkstoff: Edelstahl SUS316L / 316L. Ausführung STP – plissiert: Plissiertes Edelstahlgewebe, Trennschärfen 5, 10, 20, 25 und 50 µm, Porosität 65–85 %. Aus ...

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50799-31

Used Basan FFU 6/3 Air Filter/Cleaner Unit Fan + air Filter + Spiral Heating element Voltage: 220V (50/60HZ, 145W) 04-2001 Auction-ID: A1-50936-166

Used Wavetek Dual channel Programmable filter model 552 Voltage: 100-240 VAC Auction-ID: A1-50936-210

Lot of 5 pieces Filter box fans Voltage: 24 volts, adjustable speed Fan from the brand Papst Case dimensions: 27 x 23 x 28 cm Inlet diameter: 10 cm Auction-ID: A1-50936-169

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50799-131

1 DEPA DH25-FA-FFT (Air Operated Diaphragm Pump) pneumatic diaphragm pump Auction-ID: A1-51157-33

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50799-231

1450mm(W) x 4500mm(L) x 600mm(H) SS304-2B, 3mm PLEASE CONTACT Aaron Tan (+6017369 8203) MALAYSIA NUMBER LOCATED AT F11AW

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed air Technical data Type: P-EG 0768 Max. working pressure: 10 bar Test pressure: 18.3 bar Material: stainless steel 304 (1.4301) Operating temperature (gas, air): -25/+150 °C Volume: 77 litres Acc. classification to 2014/68/EU for fluids group 2 Flange connection: DN150 The P-EG filter housings have been developed for the purification of compressed air, technical gases and steam Dimensions & weight Height: 1410 mm Width: 480 mm Weight: 70 kg Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-281

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed air Technical data Type: P-EG 0768 Max. working pressure: 10 bar Test pressure: 18.3 bar Material: stainless steel 304 (1.4301) Operating temperature (gas, air): -25/+150 °C Volume: 77 litres Acc. classification to 2014/68/EU for fluids group 2 Flange connection: DN150 The P-EG filter housings have been developed for the purification of compressed air, technical gases and steam Dimensions & weight Height: 1410 mm Width: 480 mm Weight: 70 kg Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-282

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed air Technical data Type: P-EG 0768 Max. working pressure: 10 bar Test pressure: 18.3 bar Material: stainless steel 304 (1.4301) Operating temperature (gas, air): -25/+150 °C Volume: 77 litres Acc. classification to 2014/68/EU for fluids group 2 Flange connection: DN150 The P-EG filter housings have been developed for the purification of compressed air, technical gases and steam Dimensions & weight Height: 1410 mm Width: 480 mm Weight: 70 kg Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-284

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed air Technical data Type: P-EG 0768 Max. working pressure: 10 bar Test pressure: 18.3 bar Material: stainless steel 304 (1.4301) Operating temperature (gas, air): -25/+150 °C Volume: 77 litres Acc. classification to 2014/68/EU for fluids group 2 Flange connection: DN150 The P-EG filter housings have been developed for the purification of compressed air, technical gases and steam Dimensions & weight Height: 1410 mm Width: 480 mm Weight: 70 kg Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-285

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed air Technical data Type: P-EG 0768 Max. working pressure: 10 bar Test pressure: 18.3 bar Material: stainless steel 304 (1.4301) Operating temperature (gas, air): -25/+150 °C Volume: 77 litres Acc. classification to 2014/68/EU for fluids group 2 Flange connection: DN150 The P-EG filter housings have been developed for the purification of compressed air, technical gases and steam Dimensions & weight Height: 1410 mm Width: 480 mm Weight: 70 kg Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-283

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed air Technical data Type: P-EG 0768 Max. working pressure: 10 bar Test pressure: 18.3 bar Material: stainless steel 304 (1.4301) Operating temperature (gas, air): -25/+150 °C Volume: 77 litres Acc. classification to 2014/68/EU for fluids group 2 Flange connection: DN150 The P-EG filter housings have been developed for the purification of compressed air, technical gases and steam Dimensions & weight Height: 1410 mm Width: 480 mm Weight: 70 kg Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-280

Equipped with an ELEKTROKOVINA electric motor. Motor characteristics: 1 HP (0.75 kW), 220/380 V power supply, current 3.4/1.96 A, frequency 50 Hz. Set with metal tank, filter bag and tubular frame on legs. Auction-ID: A1-51273-35

Silo setup; Ø silo 2800 mm; Equipped with transport dosing valve; sampling module; compressed air-operated; mounted on steel structure; without steel structure; air exhaust muffler 1690mm; ø630mm; drain 5100mm; ø 715 mm; dust emission measurement; Auction-ID: A1-50864-3

EASY-14WSRF Bicycle Welding Fume Filter EASY-1400 SRF I KW engine power, 1400 m/h, 10 m² filter area. Complete with 1 extraction arm 160 mm Diameter 3 meters long, with capture hood.

Max. volume flow rate: 1,260m³/h, possible number of filter stages: 1, 2, operating voltage: 3x 400V, PE, N, frequency: 50Hz, rated power: 1.8-2.9kVA, max. rated current: 2.7-6.6A, upstream fuse: 16A, mains connection three-phase AC: 400V, max. rated power: 2.9kVA, max. rated current: 6.6A, upstream fuse: 16A, control cabinet protection rating: IP54, max. differential pressure: 2,380Pa, compressed air quality: factory-supplied, oil-free, dry, max. inlet operating air pressure: 8bar, operating temperature: 5-40°C, weight: 165kg. On-site inspection is possible.

The system has been dismantled so far except for the pipeline in the hall. This must be dismantled by the buyer himself. Weight/square meter are estimated. Auction-ID: A1-51321-11

Laminar flow hood with stainless steel worktable for control or development labs. Equipped: - 1 H14 filter. Dimensions: 820 x 450 x 68 mm - 1 H14 filter. Dimensions: 610 x 305 x 68 mm - 1 turbine power 1100 watts at 1300 rpm Worktable length 900 mm - width 400 mm Glass Half Door To be placed on a bench or base Auction-ID: A1-51318-296

On and including 7 pallets; as well as 1x pallet with big bag Auction-ID: A1-50892-23

Nominal volume flow: 100 l/min Auction-ID: A1-51285-416

Volume flow: 21 m³/h Desiccant quantity: 2.6 kg Auction-ID: A1-51285-296

Lot with 15 coalescing filter elements. Labeling according to the packaging label shown: • Part Number: CA22-3SB • NSN: 4330-01-458-9915 • CAGE code: 87405 • Designation: Coalescer Element Sold as a total batch of 15 pieces. Compatibility must be checked on the basis of the part number and the respective system. Auction-ID: A1-51488-7

(c) equipped with pneumatic knocking device, fall valve, including the central drainage channels through the hall. This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-16

Featured; Extraction system Auction-ID: A1-47367-2500

Lot of 3 filter elements for fuel filter/water separator systems. • NSN: 4330-00-983-0998 • Labeling on the packaging: 4330009830998 • Designation: Filter Element, Fluid • Length according to NSN specification: approx. 508 mm • Outer diameter according to NSN specification: max. 95.3 mm Sold as a total lot of 3 pieces. Compatibility must be checked on the basis of the NSN and the respective plant. Auction-ID: A1-51488-8

Power: 3 kW. Auction-ID: A1-51529-122

Power: 0.75 kW. Auction-ID: A1-51529-112

Set of 3 um Sartorius filters. 160 pcs. Auction-ID: A1-51535-310

Included: Extraction arm Auction-ID: A1-51523-53

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Norgren, filter regulator with pressure gauge, unused, original packaging -Type: B72G-2GK-ST3-RMN -Pressure: max. 10 bar -Number: 4x filter control valves available -Price: per piece -Cardboard dimensions: 330/55/H55 mm -Weight: 0.6 kg/pc.

Aquabatch is a filter system which is specially designed to remove hair and lint our of a washing installation. Auction-ID: A1-42990-109

Set of 20 Intersurgical Clear-Guard Midi Respiratory Filters – Part No. 1644011, never used Manufacturer: Intersurgical Model: Clear-Guard Midi Part Number: 1644011 Quantity: 20 Condition: New, never used Best before Date: August 2028 Auction-ID: A1-51618-259

AGIE filter system / dielectric treatment DA-19 for wire EDM machine For sale is an original AGIE filter and dielectric treatment system type DA-19. The system is used to clean and reprocess the dielectric of AGIE wire EDM machines and is suitable as a spare part or for rebuilding existing machines. Technical data Manufacturer: AGIE Type: DA-19 Serial number: 063.004 Weight: approx. 430 kg Made in Switzerland Application area AGIE Wire EDM Machines Filtering of the dielectric Process water treatment Spare parts dispenser or repair Condition The plant comes from an industrial company and was removed from an AGIE EDM machine. The interior shows the usual signs of wear and tear and residues from the EDM process. Viewing possible by appointment. Functionality untested. Auction-ID: A1-51577-16

Capacity: 8220 m3/h. Equipped with 11kW fan. Auction-ID: A1-42990-147

Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  Capacity: approx. 50 hl/h (tandem system, 24h operation) Filtration type: Crossflow (microfiltration) Number of modules: 48 Operating temperature range: 0°C to 70°C Equipment: Pumps, integrated CIP system, complete piping, control system Control system: Siemens S7 with Siemens OP07 HMI Automation level: Fully automatic Equipment ...

Used Ingersoll Rand F19V compressed air filter with filter element 5075V for the treatment of compressed air in industrial compressed air systems. Manufacturer: Ingersoll Rand Model: F19V Filter element: 5075V Maximum operating overpressure: 16 bar Maximum operating temperature: 80 °C Tank volume: 22 litres Factory number: 08/55437 Equipment: Electronic differential pressure indicator, automatic steam trap Condition: Used

Ingersoll Rand IRGP481 Compressed Air Filter with BEKO Steam Trap Used Ingersoll Rand compressed air filter IRGP481 with electronic differential pressure indicator and BEKO BM12 steam trap. Manufacturer: Ingersoll Rand Model No.: IRGP481 Filter Element Kit: 88343876 Condensate Drain Kit: 88343272 Item number drain kit: 88349535 Differential pressure gauge: Available, display defective Steam trap: BEKO BM12 Operating pressure steam trap: 0.8–16 bar Steam trap operating temperature: +1 to +60 °C Power supply steam trap: 230 V AC, 50-60 Hz Steam trap protection rating: IP65 Condition: Used Location: Rehweiler

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Norgren, Excelon filter regulator -Type: B72G-2GK-ST3-RMN -Pressure: max. 10 bar -Number: 3x filter control valves available -Price: per piece -Dimensions: 50/48/240 mm -Weight: 0.5 kg/pc.

Not all boxes are filled. Auction-ID: A1-51267-5057

SC 200 hydraulic plate screen changer for sale – Type: Ø 200. Used device, after full overhaul, offered with a 6-month warranty. Designed to work in plastic extrusion and recycling lines, for stable filtration at high material pressures. Compliant with applicable standards and CE marking. Specifications: Type: Hydraulic plate screen changer – Ø 200 Condition: used, refurbished (after renovation) Warranty: 6 months Maximum Material Pressure: ≤ 35MPa Plate Moving Time: ≤ 2 seconds Supply Voltage: 220V or 380V, 50Hz Heating power: 12 kW Plate Control System: Hydraulic Unit Compliant with standards: CE – yes Fast screen change (up to 2 seconds) – reduce pressure drops and line downtime. The hydraulic drive ensures a secure sealing of the plate and safe operation at high pressures. Offered after renovation, with a warranty, which minimizes the risk on the  ...

Complete blasting cabinet; \"Airkrone\" KSA 15 compressor year 2015; circulation system with buffer; extraction installation with filter unit; including suit; door; blast pack; Blasting cabinet size; approx. 9200x 3600x3100mm (LxWxH); LED lighting; Auction-ID: A1-47369-8