filter line used for sale

Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...

used chamber filter press / filter press used chamber filter press / filter press Passavant 1200 x 1200 record size: 1200 x 1,200 mms benefit length: 4,000 mms record number: 68 cake thickness: 30 mms filter pressure: 15 cash Schliessdruck: 350 cash record material: PP records expiry: unanimously engine tension: 380 volts / 50 hertz record transport: automatically filter cloths: optionally

used filter press Hoesch - cast iron small filter press from cast iron to the filter of liquids solutions, dirty waters, oil, biooil, rapeseed oil-used - with handwheel - downpour filter records 30x30 cm - with collective tub - tilled manual pump - dimension ca 1,00x0,5x0,7 m - weight approx. 300 kg with hand pump the arrangement stands to the rent and for the purchase at the possession.

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 30 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Procedure: open Open filter surface: approx. 7.5 m square Presses contents: approx. 90 dm m³ PCB package length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Safety equipment: optional Optional accessories: optional possible depending on design Extensions: In consultation according to the design Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delive ...

Used chamber filter press knight's house and Blecher R& B 800 x 800 benefit lengths: 3500 chamber number: 64 filter pressure: 16 bars Schliessdruck: min 300 bars, max. 320 bars filter surface per chamber: approx. 0.97 m� whole filter surface: approx. 62 m� cake volumes per chamber: approx. 11.19 litres cake volumes whole: approx. 716 litres record material: Expiry PP: openly service side: on the right light barrier the arrangement is in a very good state.

Cat. No. 13-0217B-03 in very good condition measurement and weight: 2 plates in stainless steel 60 x 60 HxLxW: 134 x 220 x 97 cm 37 plates in pvc 60 x 60 weight: appr. 850 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 26 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 9.7 m m² Presses contents: approx. 130 dm3 PCB package length: 1500 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Dimensions: Lxwxh Empty weight: Accessories: depending on the type and customer Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delivery. On these systems, we guarantee between 6 to 12 months. Condition: The plant is located in a very good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility ...

used, kpl. 1 year warranty, plate size 470 x 470 mm, 11 plates, closed outlet, 45 mm cake thickness, pressure 8/10 bar, capacity approx. 75 liters, filter area 4m2, dimensions 2000 x 700 x 1100 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Repented range Purpose: Filtration of beer, water, syrup

used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open or closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 150 liters, filter area 13m2, dimensions 3000 x 1200 x 1200 mm, weight 1.2 to, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

Ready for SortimentZweck: filtration of beer, water, syrup

Filter tower with 166 nozzle filters with automatic pneumatic cleaning used Manufacturer: NETZSCH Total filter area approx. 225 m2 166 hose filters each approx. 1.36 m2 filter area Wire filter baskets approx. 120 mm length approx. 3.6 m with pneumatic cleaning 4 pneumatic knockers and compressed air loosening Collecting hopper with vibrator and blow-through lock Tower diameter outside: approx. 3.4 m incl. flange approx. 15 cm Tower height approx. 13.5 m Total dimensions with boxes for cleaning: approx. 3.4 x 4.1 x 13.5 m The filters were used in a carbon production plant. Above the filters there is a room about 4 m high, closed with a door, which makes it possible to change the filters inside. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

used, kpl. 1 year warranty, plate size 470 x 470 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 130 liters, filter area 11m2, dimensions 2800 x 800 x 1200 mm, weight 850 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 700 x 1200 mm, weight 700 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Cardridge filter single, 1 x with TI Max. Operating pressure: 10 bar Max. Operating temperature:-25 / + 150 ° C Content: 9.3 L Price/piece Negotiable

used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 80 plates, open or closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 1700 liters, filter area 130m2, dimensions 8500 x 1700 x 1800 mm, weight 11 to, motor, drip sheet, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 50 plates, closed outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 520 liters, filter area 522, dimensions 5000 x 1400 x 1500 mm, weight5000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...

used, kpl. 1 year warranty, plate size 500 x 500 mm, 30 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 115 liters, filter area 12m2, dimensions 3000 x 1000 x 1400 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

used, kpl. 1 year warranty, plate size 400 x 400 mm, 20 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter area 5m2, dimensions 2500 x 700 x 1500 mm, weight 1000 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, Piston pump with cpl. Piping with built-up

USED TEFSA EHR 1200-16 FILTER PRESS REF.: C5899 Used EHR-1200/16 filter press manufactured by TEFSA. Currently it is provided with 19 plates of 1200x1200 mm but it has a capacity of 29 plates General characteristics: Manufactured by TEFSA Model EHR 1200-16 Type Press filter Year built 1993 Weight 13.300 kg With complete documentation Overall dimensions: Total length: 7,305 mm Total height: 2,000 mm Total width: 2,000 mm General characteristics: Working length: 1900 mm Hydraulic central motor power 5.5 kW Turning motor power: 1.5 kW Working pressure: 16 bar Closing pressure: 390 bar Technical characteristics: Work pressure 16 bar No. of plates 19 (ampliable a 29) Panel surface 1200x1200 mm Filtration area 40 m2 (ampliable a 60 m2) Volumen de torta 602,3 dm3 (ampliable a 920 dm3) - espesor 30 mm Hydraulic equipment 5.5 kW

used, kpl. 1 year warranty, plate size 800 x 800 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 460 liters, filter area 36m2, dimensions 3500 x 1200 x 1500 mm, weight 4000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 800 x 1400 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Used filter press made by Seitz, type 40/30. PP plates with dimensions 40x40. 2 pieces available.

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 75 liters, filter area 6m2, dimensions 3500 x 800 x 1600 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, built-up Häcker piston pump with kpl. VA - Piping

used, kpl. 1 year warranty, plate size 400 x 400 mm, 13 plates + 12 frames, closed outlet, 30 mm cake thickness, pressure max. 6 bar, capacity approx. 35 liters, filter area 4m2, dimensions 1500 x 800 x 1000 mm, weight 700 kg, hand hydraulics, drip plate, filtrate gutter, with or without Filter cloths, also available as a longer frame with more plates and frames

used, kpl. 1 year warranty, plate size 630 x 630 mm, 50 plates, closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 480 liters, filter area 33m2, dimensions 4300 x 1200 x 1200 mm, weight 2.2 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

Used pressure filter made by Sfoggiatech, model SEB 1/P3. Filtration area 1 m3. Engine power 1,7 kW.

used, kpl. 1 year warranty, plate size 630 x 630 mm,25 plates, closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 200 liters, filter area 16m2, dimensions 3000 x 1200 x 1200 mm, weight 1.5 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

Fine filter insert Ultipleat SRT, 1055mm x D152mm, UE619AS40Z, Pall, new Attention: Original Pall product, no replica of.. Filter fineness 12my Special price We still have several identical and other such devices, but the quantity is ending. If you buy more than 1 piece, there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely new and in the original packaging. Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into operation upon acceptance. In the event of a defect for which the seller is not responsible, the goods can be returned within 2 weeks. We will only reimburse the buyer for the product price paid to us. For  ...

used, kpl. 1 year warranty, plate size 800 x 800 mm, 40 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 416 liters, filter area 42m2, dimensions 5000 x 1400 x 1600 mm, weight 5.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 600 liters, filter area 48m2, dimensions 5500 x 1400 x 1600 mm, weight 5.8 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Hydraulic cylinder filter press Chamber filter press New, used and refurbished Ask us.

used, kpl. 1 year warranty, plate size 630 x 630 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 8 bar, capacity approx. 234 liters, filter area 19m2, dimensions 3000 x 1200 x 1600 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, attached compressed air diaphragm pump

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 25 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic. Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 360 liters, filter area 28m2, dimensions 3800 x 1400 x 1600 mm, weight 2.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Attachment: Chamber filter press, laboratory press Usage area: Chamber filter press, pilot plant Design: page Holm led Type: XMS150-15 U Filter plate format: 150 x 150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Thickness: 15 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 0.2 m ² Presses contents: approx. dm3 PCB package length: mm Filter pressure: 15 PSI Plate transport: manually Pump technology: included - optional Type: centrifugal pump Type: CHL2-20 Buying or renting: Visit the facilities in consultation with us to work. Condition: demonstration plant, near Mint Photo: a construction-like setting Weight: approx. 70 kg length 70 cm: Width: approx 40 cm Height: With stand + pump approx. 85cm

used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 12 bar, capacity approx. 150 liters, filter area 12m2, dimensions 2500 x 900 x 1200 mm, weight 800 kg, hand hydraulics, drip plate, filtrate channel, with or without filter cloths

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 40 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic, Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates + 40 frame, closed outlet, 40 mm cake thickness, pressure max. 6 bar, capacity approx. 500 liters, filter area 27m2, dimensions 4800 x 1200 x 1600 mm, weight 2.5 tons, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates, open outlet, 30 mm cake thickness, pressure 7/15 bar, capacity approx. 384 liters, filter area 17m2, dimensions 4500 x 1200 x 1500 mm, weight 350 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

Machine Name: Chamber Filter Press Manufacturer: Passavant Type: AX 1200 Year of construction: 1990 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 1800 litres (expandable to 2500 litres) Expiration: Closed Filter area: Approx. 127 m2 (expandable to 175 m2) Plate size: 1200 x 1200 mm Number of plates: 51 (expandable to 70) Panel material: Polypropylene Plate Transport: Automatic Cake thickness: 30 mm Closing pressure: 360 bar Dimensions: L 8000 x W 1900 / 2500 x H 2300 + 600 mm Tech. Documentation: Yes Note: Available mid-February 2024 Accessories: A hydraulic system, a light barrier, a high-pressure pump Condition: Used Price: On request

used, kpl. 1 year warranty, plate size 800 x 800 mm, 55 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 710 liters, filter area 58m2, dimensions 6000 x 1400 x 1800 mm, weight 6500 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 6000 x1300 x 1500 mm, weight 5800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Plate filters/layers filter on role Manufacturer: KTM Troxler Type: FP 430 30 filter plates made of plastic DN 25 outlet with valve bottom Filter plate size: 40 cm x 40 cm In very good condition!

used, kpl. 1 year warranty, plate size 800 x 800 mm, 100 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 1320 liters, filter area 106m2, dimensions 9000 x 1300 x 2200 mm, weight 11,000 kg, motor hydraulics, filtrate channel, with or without filter cloths