filling machine used for sale

This 3-axis EMCO Emcoturn 65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details.

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

Gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-roller system; Glue basin height-adjustable; suitable for cold glue. Gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two roller system; glue reservoir adjustable in hight; used for cold glue.

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009 Sale exclusively to traders or export! We have more than 400 bakery machines and more than 300 ovens permanently in our warehouse in Bielefeld. Multiback Bakery Technology Artur-Ladebeck-Straße 171 Bielefeld

Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.

Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details.

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009

This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details.

Plasma cutting machine manufactured in 2020. This PLASMACUT 3015T features a cutting area of 3,020 × 1,520 mm and a maximum plate thickness of 50 mm. It includes a robust gantry drive system and operates with a Hypertherm Powermax 105 Sync plasma power source. If you are looking to get high-quality plasma cutting capabilities, consider the PLASMACUT 3015T machine we have for sale. Contact us for further details regarding this machine.

CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details.

Sinmag conical round knitter with flour spreader - with flour spreader - Cones and gutters with Teflon coating - with stainless steel base - with emergency switch - on swivel castors with parking brake

Paper drilling machine Nagel Citoborma 280 AB

CNC punching machine manufactured in 2007. This AMADA EMZ 3610 NT features a press force of 300 kN and a travel distance of 2500 mm in the X-axis and 1525 mm in the Y-axis. It has a maximum material thickness capacity of 4.5 mm and a stroke rate of 1000 strokes per minute. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for further details.

Hydraulic shearing machine manufactured in 2002. This HERA TS 2000x6 features a maximum sheet thickness of 6 mm and a cutting length of 2080 mm. It operates with a stroke rate of 18 strokes per minute and is powered by an 11 kW motor. If you are looking to get high-quality shearing capabilities, consider the HERA TS 2000x6 machine we have for sale. Contact us for further details.

This 3-axis Wenzel LH 65 was manufactured in 2018. It features a measuring range of 650 × 750 × 500 mm and includes a Renishaw PH6M probe head with a TP200 probe. The machine is equipped with online temperature compensation and active vibration damping for enhanced precision. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 65 CMM machine we have for sale. Contact us for further details.

Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.

Wire stitching machine Agrafix BX; good condition; cleaned and tested; Stitching thickness 25mm with the clamp folded down, 40mm with the clamp not folded; block or saddle stitching; Clamp width 14mm; suitable for round or flat wire. Wire stitcher Agrafix BX; good condition; cleaned and checked; max.stitching thikness by clinched staple 25mm, 40mm by stabbed from both sides; flat or saddle stitching; crown width 14mm; used for round of flat wire.

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details.

Used SANDER Type TH strapping machine for banding and securing packages. The machine is suitable for use in storage, packaging and shipping operations. Technical data: Bandbreite: 12 mm Tischgröße: ~ 900 x 590 mm Arbeitshöhe: ~ 760 mm Stromanschluss: 230 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

Stephan Kitchen Cutter Universal Model FD 622/4D -Stephan Kutter -Aluminium boiler -Boiler with tilting function -2 speeds -with 2 mixing tools -with 1 knife mixing tool

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

Scattering unit Scattering BM Tec - with 2 satchels (on both sides) - Running tables individually removable - completely in stainless steel - can be driven on castors - 4 seed containers - with rack trolley for storing the running tables

For sale is a homogenizing plant Koruma V160/400 for the production of ketchup / mayonnaise, etc.

X-axis: 1600mm, y-axis: 1800mm, z-axis: 1000mm, max. workpiece weight: 3.5t, noise level: less than 70dBA, compressed air connection: 6-8bar, connected load: 2500VA, control: CALYPSO 7.6.08 software, length: 2940mm, width: 2450mm, height: 3800mm, weight: 8.5t, operating hours: 38,996h, with documentation. An on-site inspection is possible.

The Sodick AQ325L with the LN1W control is a high-precision CNC wire EDM (Submersible Wire EDM) machine specially designed for tool and mold making as well as for machining complex geometries in hardened or difficult-to-machine materials. A core feature of this series is the use of linear motors on the main axes (X and Y axis). In contrast to classic spindle drives, linear motors offer backlash-free, highly dynamic and wear-free power transmission, resulting in exceptional surface quality, high dimensional accuracy and minimal risk of wire breakage. Technical data (Sodick AQ325L / LN1W)Travel (axes)X-axis: 350 mmY-axis: 250 mmZ-axis: 220 mmU-axis: 80 mmV-axis: 80 mmMax. Konik angle: $\pm 20^\circ$ at 80 mm workpiece heightTable and workpieceClamping table (L x W): 600 x 400 mmDimensions work container (inside): approx. 895 x 650 mmMax. Workpiece weight (in submerged state): 300 kgMax. Wo ...

Gemini Convert Chat to PDF Convert Chat to PDF Open this chat in Acrobat New chat Search chats Images Media library New Notebook Sodick AQ325L LN1W Specs LibreOffice NotebookBar: Ribbon Design Explained Synology NAS Access via Windows Explorer Stylevana Order: Important Notes Resale.de: Visibility, Email and Location Free Machine Multiposting Alternatives and ReSale: Differences Tax Changes Income Tax Summary Firewall blocks on Windows Server UniFi G6 Pro Entry RFID Support UniFi Access: Face, Code, RFID What is a proxy server? Xiaomi 15 Selfie Shutter Alternatives Grilling corn: raw or precooked? Candesartan: Tingling as a side effect Mailcow vs. Tobit David: A Comparison Customize the Home Assistant overview ioBroker SQL Adapter: Null Value Warnings Camera IP address and DHCP access Wise Manager: No video signal despite PTZ Find your camera on your new n ...

Subject: Maximum safety and ease of use for your dough divider Dear Ladies and Gentlemen, daily work with dough parts requires the highest level of safety without restricting efficiency in the production process. With our specially developed safety light curtain, we offer you a modern solution that combines reliable personal protection with practical ease of use. The system is mounted directly on the dough hopper and continuously monitors the danger area. If an intervention is detected, the machine stops immediately – an important measure to effectively prevent injuries. At the same time, the integrated muting function allows the baker to bring the dough into the hopper quickly and easily. This maintains the flow of work while ensuring safety at all times. Another advantage: All operating states are clearly visible at all times via a clearly visible signal light. Green sig ...

Belt round knitter Kemper SBR-2500 Kemper belt round knitter with 2500mm long belts, with flour spreader.Speed adjustable via pot, machine can be moved on rollers, height adjustable. The machine is visually and technically in good condition, can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.

Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Durchlauföfen Herdwagenöfen Kammeröfen Schachtöfen Schmelzöfen Industrieöfen gebraucht Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen Rollenherdofen Gußplattenbandofen Reinigungsanlagen

Kammerofen-Anlage für Aluminium Kammerofen-Anlage für Aluminium für den universellen Einsatz wird für die komplette Bandbreite des Aluminium-Glühens konzipiert. Kammerofen zum Glühen von Al-Folienbunden Bunde nach dem Glühen, temperaturgesteuert im fen abgekühlt. Bei Mehr-Kammeröfen und größeren Durchsätzen erfolgt die gesteuerte Abkühlung in einer hierfür vorgesehenen separaten Kammer. H erdwagenofen Rolleherdofen Kammero fen Drehtellerofen Wag enherdofen & Tunnelofen Haubenoen Schach tofen Sonderanlagen Leichtmetall-Folienbunde werden in 1 -Kammer- und Mehrkammeröfen, elektrisch und Gas beheizt, geglüht. Die Öfen werden mit Luftumwälzung versehen, die eine konvektive Erwärmung des empfindlichen Materials gewährleistet. Die Folienbunde werden so in Gestellen angeordnet, dass eine gleichmäßige Durchströmung des Nutzraumes gegeben ist. Die Gestelle werden mi ...

Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details.

This 3-axis ONA NX6 die-sinking EDM machine was manufactured in 2007. It features a working table dimension of 1,000 × 700 mm and an impressive X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 400 mm. With a maximum table load of 4,000 kg, this machine is designed for high-quality machining capabilities. If you are looking to get high-quality die-sinking capabilities, consider the ONA NX6 machine we have for sale. Contact us for further details.

This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.

CNC Lathe Manufacturer: Gildemeister Type: CTX 410 V3 Machine No.: 0136004581 Year of Make: 2006 Control: Siemens 840D ShopTurn Circumferential diameter: 505 mm Chuck diameter: 210 Spindle passage: 65 mm Drive power: 40/ 100%ED 21/28 KW Speed range from – to: 25-5000 Dimensions approx.: 4300x2000x1800 Weight approx.: 5600 Kg - 12-speed revolver - VDI 40 - C-axis - Powered tools 12 stations - Package bar machining - Chip conveyors - Tailstock - SMW Autoblok 210BB - Driven tool holders 3x axial - Driven tool holders 2x radial - Various other tool holders - New engine for revolver Errors excepted

Lapping machine Wentzky - Lapping discs diameter 700 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Gehring Honing Machine E 630-45 - Honing diameter: 3 - 45 mm - Honing length max: 350 mm - Number of honing spindles: 1 - Stroke length: 2 - 630 mm - Electric lift drive - Lifting speed: 1 - 40 m/min - Stroke control: infinitely variable - Spindle speed: 150 - 6000 1/min Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details.

Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details.

BÜHLER ECOLINE S PRO 34 die casting machine was built in 2018 in Switzerland by Bühler AG. The machine was used occasionally and is in very good technical condition. The BÜHLER ECOLINE S PRO 34 is designed for the die-casting of aluminium alloy components. It enables the efficient, mass production of aluminium castings used, among others, in the automotive, electronics and machinery industries. In the die-casting process, liquid aluminium is injected under high pressure into a closed die. Once the die is filled, the material cools and precisely takes on the die’s shape. The combination of this technology with a high clamping force of 336 tonnes enables the production of repeatable castings with even the most complex geometries. The BÜHLER ECOLINE cold-chamber die-casting machine is part of a complete production line designed for aluminium die-casting. It includes an ABSOLENT  ...