136,777 used machines on RESALE, but how to find them? Machine Search
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Machine vise, sturdy vise, drill vise -Jaw width: 296 mm -Back height: 50 mm -Clamping range: 255 mm -Dimensions: 600/300/H155 mm -Weight: 89 kg
Flame cutting system, torch, oxyfuel cutting system -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with socket) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg
Used spiral kneader KEMPER, type: ST 75 A -Refurbished - for 120 kg of dough or 75 kg flour - incl. 2 extendable tank wagons - Condition: Very good, ready for immediate use - 6 months warranty Sightseeing and test run are possible by arrangement.
IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.
Linear brush Tresy for cleaning system Wandres Technical data: • Usable width A (mm): 3200 • Order number: 6732601 • Available: 2 pieces
E.C.H WILL ROTEX – TRI Year: 1987. One real stand. Diameter 1.2 max width 96 cm 4 hole perforation Print 2/2 Cross cutter 2 cover feeder Counting and collecting, Stitching unit Folder, Square back press. Long side cutting/short side cutting Speed: 400 m/ min Max 60 stroke/ min Cross Cuter: 300 mm, 355 mm, 420 mm and 455 mm From spare parts have gears for sheet count, knifes, stitching heads, printing cilindars.
Machine vice, sturdy vice, drill press vice -Jaw width: 215 x 40 mm -Clamping depth: max. 240 mm -Tension: centric -Dimensions: 460/280/H135 mm -Weight: 35 kg
Machine vise, sturdy vise, drill vise -Jaw width: 160 x 45 mm -Clamping depth: max. 260 mm -Tension: centric -Dimensions: 590/200/H125 mm -Weight: 36 kg
Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm -Dimensions: 1440/760/H1745 mm -Weight: 712 kg
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Collmann Type : 2x Hydo 24 chocolate depositor 1x hydraulic unit included YOM : 2001 Output : up to 25 cycle/min We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex warehouse Hess. Lichtenau (EXW),unpacked
Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, armored rollers, machine transport rollers -Load capacity: 1000 kg -Type: 4567005 -Dimensions: 500/340 / H105 mm -Weight: 17 kg - only 1 piece available
Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: 110 mm -Dimensions: 460/165/H115 mm -Weight: 39 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 50 mm -Clamping depth: max. 110 mm -Dimensions: 460/160/H120 mm -Weight: 36 kg
Machine vise, sturdy vise, drill vise -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg
Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 45 mm -Clamping depth: 195 mm -Dimensions: 500/160/H135 mm -Weight: 30 kg
Surface grinder, tool grinder, grinding machine, -Clamping table: 650 x 200 mm -x-axis: 650 mm -y-axis: adjustable 200 mm -max intermediate dimension: 350 mm -grinding wheels: Ø 150/max. 200 mm -Dimensions: 1300/1680/H1460 mm -Weight: 1080 kg
The laser BYSTRONIC BYVENTION 3015 was manufactured in 2009 in Switzerland. The laser cutter is equipped with two cutting heads: 5 and 7.5 inches. Technical parameters : - laser source power: 2200 W - punching machine hours: 17487 h - 2 cutting heads: 5 and 7.5 inches - maximum size of the processed sheet: 3000 x 1500 mm - maximum cutting thickness, black steel: 8 mm - maximum cutting thickness, stainless steel: 6 mm - maximum cutting thickness, aluminum: 4 mm
Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg
Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 250/80 mm -Clamping depth: max. 300 mm -Dimensions: 610/250/H165 mm -Weight: 84 kg
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
Circular saw sharpening machine Vollmer Cne
TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200
Key data: 500 , 350 , 300
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
Tool grinding machine, grinding machine, angle grinding machine, rotary steel grinding machine, steel grinding machine -Grinding places: 4 -Angle tables on swing tables: 3 -Angle table for chip breaker groove: 1 -Quantity: 1 piece available -Dimensions: 1210/1210/H1450 mm -Weight: 536 kg
Table version for small cartons Label from above Dimensions: 1,100 x 600 x 600 mm high
Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.
Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm -Bore: Ø 56 mm -Number: 2x counter bearings available -Price: per piece -Dimensions: 260/160/H150 mm -Weight: 10.7 kg/piece
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Bore: Ø 56 mm -Guide slide: 180 mm movable -Hole spacing: 213/170 mm, Ø 18 mm -Dimensions: 285/250/H460 mm -Weight: 50 kg
Industrial Metal and plastic cleaning machine: COLOR-DEC ITALY GREAT CONDITION
Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.
Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 230 V -Dimensions: 1200/560/H1250 mm -Weight: 133 kg
Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 1800 watts -Voltage: 220 V -Max. Cutting capacity: 4.5 mm -Dimensions: 570/220/H250 mm -Weight: 10.5 kg
Machine vise, stable vise, milling machine vise, modular vise -Manufacturer: Gerardi, Modular Vise - Jaw width: 195 mm - Jaw height: 60 mm -Clamping range: 345 mm -Total dimensions: 595/195/H130 mm -Quantity: 1 piece available -Weight: 63kg
Machine vice, stable vice, milling machine vice, modular vice -Manufacturer: Gerardi, Modular Vice -Jaw width: 195 mm -Back height: 60 mm -Clamping range: 450 mm -Dimensions: 695/195/H130 mm -Weight: 70 kg
TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11
REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition
Machine vise, sturdy vise, drill vise -Jaw width: 140 mm -Back height: 40 mm -Clamping depth: 145 mm -Dimensions: 550/195/H105 mm -Weight: 39 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Jaw height: 35 mm -Clamping range: 65 mm -Dimensions: 400/260/H135 mm -Weight: 30 kg
Steel staircase, exterior staircase, machine staircase, machine access, extension staircase -Design: stable design, as a machine access ladder -Step size: 600 x 260 mm -Height: upper step 200 mm -Overall dimensions: 590/620/H220 mm -Weight: 28 kg
MAHO MH-700 with numeric control X, Y Table size: 800x300 Working area: X-450,Y-250,Z-300 Spindle taper: MK3 Feed range: 7-250mm/min Vertical head swiveling 90 degreess Power: 3KW Dimensions: 1300x1200x1700
Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: Ø approx. 217 x 18 mm -Recess: Ø 90 mm -Degree display -Dimensions: 275/340/H90 mm -Weight: 20.6 kg
LINX-SL501-CO2-Laser Engraving machine equipped with fume extraction unit. Machine in perfect working condition. LINX SL 501 is one of the fastest Laser marking machines ever, it makes 90 marks per minute and its developed for the line productions for marking glass, papers, plastic and other non metal parts, As well metal, but just taking coloured skin out.
Bag width up to 20 cm, Bag length up to 32 cm, machine in production
maximum number of results exceeded
please refine your search
