filling machine used for sale

VACUUM STUFFER WITH LOAD LIFTER, HANDTMANN TYPE: VF200B CODE: N80/35 Technical description: Throughput rate: Up to 5.000 Kg/ h Power supply: 380/440 V - 50/60Hz Power: 6,5 Kw Dimensions: 2000 x 1350 x 2200 mm

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

DOSING, FILLING AND TRAY-SEALING, MONDINI Technical description: Doser model: CD / APM-S Serial number: 1363-1397 Power supply: 400 V, 3 Ph, 50 Hz Hopper capacity: 200 litros Dosing diameter: ? 50 mm Dimensions: 1750 x 1300 x 1980 mm Tray-sealer model: CVS / mt.1 Serial number: 1363-1397 Power supply: 400 V, 3 Ph, 50 Hz Film widht: 135 mm Roller total widht: 195 mm Tray feeder size: 145 mm x 100 mm Tray size: 135 x 85 mm Tray-sealer dimensions: 4300 x 900 x 1960 mm

VACUUM STUFFER WITH LOAD LIFTER, HANDTMANN TYPE: VF100B CODE: 50/55 Technical description: Serial number: 16455 Power supply: 380/440 V - 50/60Hz Power: 5,5 Kw Throughput rate: Up to 3.000 Kg/ h Dimensions: 1680 x 1300 x 2000 mm It can be combined with Portioner and sausage hanger HANDTMANN

STUFFER HANDTMANN, TYPE: VF80 AND SAUCE DOSING MACHINE HANDTMANN 6 HEADS Technical description: Stuffer (x2): Handtmann VF 80 (1) ID-1638 TYPE: VF80 10-5N Serial number: 637 Power supply: 380 V, 50 Hz, 9,55 A, 3,55 kW Dimensions: 940 x 900 x 1600 mm (2) ID-1640 TYPE: VF80 N50/35 Serial number: 221 Power supply: 380 V, 50 Hz, 10.85 A, 4 kW Dimensions: 1050 x 700 x 1600 mm Sauce dosing machine, Handtmann ID-1639 Heads number: 6 Dimensions: 2300 x 1050 x 1650 mm

Product number: 2689 Type: PA30-7 Serial number: 821 Capacity: max 4800 kg/hr Filling pressure: up to 55 Bar Power: 3 x 380V, 50Hz, 4.3kW Dimensions: 900 x 600 x 1300 mm Weight: 375 kg Filling, portioning and linking

HANDTMANN VF-630

Liquid dosing unit (oil dosing unit) Dosing unit with 12 dosing nozzles For automatic filling of cups, containers, trays, thermoformed packaging, etc. designed with 6 filling flow outputs with SIEMEN SIMATIC S7 – 300 PLC controller Hopper (capacity) up to 55 litres Dosing unit with 12 dosing nozzles Equipped with 6 filling stations (each with 2 dosing nozzles) Dimensions set-up for the machine: 75 x 150 x 220 cm (W/D/H)

We sell here a vacuum filler from the manufacturer Frey, type KA 50 in a very good used and functional condition. The machine runs on 400 volts, 3.0 kW, completely stainless steel, with holding device, casing applicator, cornucopia, LCD control, workshop tested, immediately ready for use, dimensions W/D/H 70/70/160 cm, others on request.

We sell here a vacuum filler from the manufacturer Vemag, type 134 in a very good used and functional condition. The sausage filler is built in 1999, runs on 400 volts, programmable, hopper divisible, incl. filling cone, for filling, portioning and unscrewing, workshop tested, ready for immediate use, dimensions W/D/H 60/80/160 cm, others on request.

Continuous vacuum filler for straight filling and portioning - Machine features: - All-in-one 250 l hopper with counter arm and reinforced scraper, - Integrated vacuum pump 20 mᶟ - Double screw - Standard double screw housing Control: РС Program memory for 99 filling programs, Portion weight: from 5 up to 60 000 g Lifting and tipping device for HPC with 250 l hopper To fit standard trolley, 200 l capacity Machine dimensions in сm: Width: 134,0 Length: 220,0 Height: 200,0 Power: 9,5 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Product number: 2801 Type: Kompakta 2-30 Serial number: K230C10136457 Year of construction: 2017 Content: 30 litres Power: 3 x 400V, 50Hz, 3.7kW Dimensions: 770 x 930 x 1250 mm Weight: 350 kg For filling, portioning and linking With casing holder

Product number: 2832 Type: VF50 Serial number: 2157 Pump capacity: max 2600 kg/hr Filling pressure: max 55 Bar Portioning range: 5 - 100000 g Hopper: 80 litres Power: 3 x 380V, 50Hz, 4kW Dimensions: 1050 x 930 x 1650 mm Weight: 450 kg Filling, portioning and linking Including 34-4 linking device MC controls

Used vacuum filler FREY, type: Konti A50 - good condition More information on request.

Hydraulic Piston Filler Mainca Made of stainless steel Dimensions: 65x50x125cm Electrical power: 1.1kW

Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.

Product number: 2848 Type: VF300 Serial number: 1217 Year of construction: 1990 Pump capacity: max 10000 kg/hr Filling pressure: up to 35 Bar Hopper: 350 litres Power: 3 x 380V, 50Hz, 9.5kW Dimensions: 1300 x 1600 x 2050 mm Weight: 1350 kg Filling, portioning and linking, MC controls With lifter for 200L tote bins Including 34-4 linking device and HV 60-6 holding device

Vacuum filler Handtmann Type: VF 610 Hopper capacity: 40\100 (liters) Filling capacity: 3000kg/h Stuffing pressure: 35/50 bar Porting speed: Portions Size 25 - 450 Portions/min Portions Size 50 - 375 servings/min Portions Size 100 - 280 servings/min Portions Size 200 - 190 servings/min Power: 3.5 kW Weight: 475 kg net External dimensions: 120 x 122 x 204 cm Twisting and holding device included in price 5,000 engine hours Condition: After inspection, ready for work The stuffer can work with all popular types of casings: natural casings, collagen

bottle washing, filling, capping, labeling maschine Heads of washing, filling, sealing : 16 - 12 - 6 production capicity ( bottle/hour) : 3000 - 4000 suitable bottle : H=170-320 Ф=50 - 100 ( 330 - 1500 ml) spraying pressure : 0.25 - 0.3 total power : 2.2+0.37 weight - 2600 The CGFR series automatic washing, filling, capping and labeling machine introduces Italian technology and is made with high precision. It can carry out aseptic filling, add a constant temperature system, replace some accessories, and can adapt to heat-resistant PET bottles such like juice, tea, drinks, etc. Filling process requirements. The machine has advanced technology, small size and compact structure, suitable for PET bottles of various non-carbonated beverages (mineral water, purified water, distilled water, fruit juice, tea, beverages, etc.) at room temperature or hot filling. , and also suitable f ...

We sell here a vacuum sausage filler from the manufacturer Frey, type Joker 50 in a very good used and functional condition. Runs on 400 volts, completely stainless steel, for filling, portioning and turning, LCD3 control programmable, including accessories, workshop tested, ready for immediate use, dimensions W/D/H 70/70/160 cm, others on request.

Electronic vacuum stuffer. Stuffer specially designed for the drawing of all calibers, in natural casings such as collagen, cellulose. The RVF 327 stuffer is designed for small and medium-sized companies, with frequent changes in the type of products and standard quantities of meat sausages. The RVF 327's distinguishing features are reliability, quick and easy cleaning, minimization of residual product or waste, and low energy consumption. The vane rotor feed pump, made of wear-resistant stainless steel, ensures a long service life and the highest product quality. Achieving smooth handling of all sausage mixtures with a minimum of air bubbles. The touch screen simplifies operation for the user and has been designed for industrial use. Available with 200 litre loading hopper. It has a port for connection and control of the different staplers or other accessories. Characteristics: H ...

CLEARANCE: The CATO vacuum mixer-mixer, model AV300E, is highly versatile, useful for all types of food (vegetables, meat, fish, ...), The incorporation of vacuum also increases the organoleptic and preservation qualities of the product. The lid is opened manually. Machine entirely built in stainless steel. It works with two T-shaped arms with two directions of rotation. The double T-arm gives the product an unbeatable appearance thanks to optimal mixing and kneading in a short space of time. All kinds of sausages, assorted and pre-cooked charcuterie: Kneading of minced meat with additives, sausages, sausages, salamis, massaging of large pieces of meat, York bar, botifarra, black puddings, Catalan, fresh sausage, various pâtés, mixtures, degassing of sauces, raw salads, cooked salads... etc. TANK CAPACITY/litres: 300 LT TANK CAPACITY IN KG: (Approximate capacity depending on the  ...

The REX RVF50 vacuum filler is a compact and versatile piece of equipment designed for small to medium-sized production environments, particularly in the food processing industry. It ensures precise portioning and elimination of air pockets in the product, which is essential for maintaining product quality and consistency. It features an intuitive control panel, making it easy for operators to set up and adjust the machine’s parameters, leading to reduced training time and increased productivity. In set with a variety of attachments and accessories, such as different filling tubes, twisting and casing holder enhancing its flexibility to meet specific production requirements. Power: 4kW Efficiency: up to 2700kg/h Hopper capacity: 50l Dimensions: L: 650mm x W:950mm x H: 1600mm

The Handtmann VF612 vacuum filler is known for its precision, reliability, and flexibility. Air-free filling technology is crucial for maintaining the quality and shelf life of the product. Handtmann fillers meet the strictest standards in the food industry. Intuitive touch-screen operation makes it easy to set various programs and allows to connect additional devices such as AL line. All stainless steel construction. Machine is equipped with a Bush vacuum pump with a capacity: 16 m3/h. In set with twisting and casing holder Portioning range: 5 – 100,000 g Efficiency: up to 600 portions per minute and 3000kg/h Filling pressure: 35 bar Hopper capacity: 90/240l Power: 4.5kW Electric: 400V, 3ph, 50Hz Total dimensions: L: 1450mm x W: 1300mm x H: 2100mm Weight: 500kg

Complete line Handtmann VF616 + AL System 228-01 + hanging unit 242-16 Technical data: Handtmann VF 616 stuffer, year of manufacture 2017 – Main drive with servo technology – Connection: 12 kW with GD 93-3 – Filling pressure up to 45 bar – Filling capacity up to 3,600 kg/h – Tank with a capacity of 240 liters, – Vacuum pump 16 m3 – Control unit with 10-inch color display and user interface Interface Windows CE user interface for connection to AL system – Operating voltage 380 – 440 V – Integrated weight compensation, – Portioning and fine adjustment from 0.1 g – Portioning range from 5 to 200,000 g – Portioning speed up to 700 portions/min. – Feeder and counter-holding scraper Portioning machine plus hanging unit PVLH 228-01 and 242-16 year of manufacture 2017. – 5.5 kW connection – Sercos drive technology – Part length from 25  ...

The Handtmann VF 80B stuffer stands out for its exceptional efficiency, boasting a filling rate as high as 3,000 kg/h. This makes it an excellent choice for industrial-scale production. Its versatile portioning capabilities allow it to accurately fill amounts ranging from a mere 5 – 100,000 grams and it can exert a filling pressure of up to 35 bar. A standard 100-liter meat bin lift complements the stuffer. In set with casing holder and twisting Details: Brand: Handtmann Model Type: VF80B Volume: 80 liters Electrical Requirements: 400V 50Hz 3N Power Consumption: 4.5 kW Dimensions: L: 1650mm x W: 1050mm x H: 2100mm.

Sausage production line VEMAG VEMAG vacuum stuffer Type: ROBOT HP 10C Hopper capacity: 250 l Productivity: 4000-5000 kg/h External dimensions: 2100 x 1350 x 2150 mm Filling pressure: max. 40 bar Maximum serving size: 0- 10000 Vacuum pump: 20m3/h Total power: 9.5 kW Hydraulic pump power: 7.5 kW Filling speed adjustable 0 - 100% Device for automatic unscrewing and portioning to length Type: LPG 208 Power: 6.0 KW External dimensions: 1650 x 1000 x 1350 mm For natural, collagen and artificial casings For connecting and portioning all popular types of casings of equal lengths using mechanical dividers according to the following principles: Fixed section length separation tape that can be changed via quick release For sausages with a caliber of 13 to 40 mm For sausages with a length from 20 mm to approx. 400 mm Portioning speed: over 2000 ports/min. (depending on t ...

Sausage filler Frey Kompakta 2-30, K2-30, 30 litres, 400 V, 3.7 kW, 16 A, very good condition!, BJ 14, electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, complete Stainless steel, speed, speed and pause length infinitely selectable, Level indicator, piece counter, number of pieces switch-off, portioning range 5 – 10,000 g, Portioning speed up to 250 portions/min., with accessories Filling tubes 12,14,18,20,24,30,42,46 mm, 1x for 99 mm cans Dimensions 60x80x110 cm, original price 32900,00 €

Vacuum filler Manufacturer: Vemag Model: Robby 1 PC-control with 99 program storage Filling capacity: max. 2.700 kg/h Filling pressure: max. 40 bar Dimensions: 205x130x210cm Electric power: 5.4kW Voltage: 400V 50Hz

Vacuum filler Manufacturer: Handtmann Model: VF 612 Portioning range: 5 – 100,000 g Efficiency: up to 600 portions per minute and 3000kg/h Filling pressure: 35 bar Hopper capacity: 240l Power: 4.5kW Electric: 400V, 3ph, 50Hz Dimensions:215x160x225cm Weight: 500kg

Vacuum filler with accessories Manufacturer: Handtmann Model: VF 616 + AL 216 - 21 Dimensions: 215x160x225cm/150x70x130cm Electric power: 6 + 2.5kW Volume: 350 liters Capacity: 3.600kg/h

DMS DF25C Piston Filler used Machine was built in 2017 and is equipped with 3 grommets The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in good condition, but should still be thoroughly cleaned before use Video about test run available

Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately

Cup filling and sealing machine 67/95mm YOM 2014. As new, Only been used for a week.

Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

Make: AMPACK, Type: Round filler ARL 8/3 Cup diameter 95mm Machine No.: 783 (0783000C) Year of construction: 1993, Commissioning 09/1994 - Control: year 2021, New built on Siemens S7 with encoder. - Slip-on lid station: 2008 NEW - All three fillers completely renewed 2022 Inclusive: - Sterile air module for laminar flow - Tray packer AMPACK - Tray erector A&F, for trays of 20 and 12 - Fruit mixing station (3x) - Various conveyors comple line in very good care Dismantling by the buyer or etra charges

Used Filling Machine Cobert Olimpia 1993 The Cobert Olimpia 16 is a used filling machine manufactured by Cobert in 1993 This versatile machine is designed to efficiently fill containers particularly glass bottles with various products such as alcohol sparkling wine and still wine With its reliable performance and adaptable features it has gained popularity in the industry Key Features and Specifications The Olimpia 16 model features 16 filling nozzles allowing for simultaneous filling of multiple bottles It operates using a slight vacuum in the bell ensuring precise and controlled filling The machine incorporates a variable height bell accommodating different bottle sizes One of the notable features of the Olimpia 16 is the rack and pinion mechanism for adjusting the filling levels on the nozzles This feature enables fine tuning and consistency in the filling process The bottle lifting p ...

This listing includes the following components for Fiber filling machine/pillow filling machine: 1. Foam Shredder Model:FX- 001 Capacity: 40-50 kg/h Voltage : 380v/50hz/3phase Power: 4kw Size:681×596× 1178mm Weight: 80kg 2. Fan with T-joint- Transfer your raw material to the Mixer machine 3. Cotton filling machine: Model: FX-1500 Voltage :380v Power : 1.5kw ＋2.2kw Size:150011002050mm Weight:330KG Cotton outlet number :2 Air pressure:0.7-0.8MP 4. Filling Pipes- 12,16,19,28,38,53,61 mm 5. Filling machine - Filling your raw material into your product Filling machine is produced in China and shipped in Europe, Bulgaria, all duty fees paid for European Union. Machine is installed on site for testing the work of it. Worldwide shipping may vary depending on Country. Please feel free to ask any questions1. Brief introduction of the cotton filling  ...

Used doy pack filling machine Bossar B 2500 Introduction and Structural Composition In the landscape of technical solutions for packaging the used Bossar B 2500 doy pack filling machine emerges as an advanced piece of equipment thanks to its construction features and high level functionality Starting from its configuration the Bossar B 2500 is a horizontal machine specifically the B2500 L STU 1 model This designation is not accidental but indicates its ability to operate with a horizontal arrangement fundamental for certain types of packaging and to maintain consistent production efficiency This filling line works in various formats from 200ml to 1l A crucial part of its architecture is the choice of stainless steel for the entire base of the automatic machine This not only provides significant corrosion resistance but also a rigid and robust structure which is indispensable in an indust ...

Fully automatic liquid filling machine with 6 filling heads for filling volumes of different alternative ranges e.g. 50-500ml ? customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder ? uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: number of filling heads: 6 | max. speed of the machine in neutral: 35 cycles/minute | accuracy: depending on chosen filling range and  ...

Fully automatic liquid filling machine with 4 filling heads for filling volumes of different alternative ranges e.g. 50-500ml ? customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder ? uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: Number of filling heads: 4 | max. speed of the machine in neutral: 26 cycles/minute | accuracy: depending on chosen filling range and  ...

Used filling machine Tetra Pak TBA8 1000 Slim Introduction of the Filling machine Tetra Pak TBA8 Firstly in the industrial bottling sector the Used Tetra Pak TBA8 1000 Slim Filling Machine represents a standout technological solution combining efficiency and innovation Manufacturer and Model Produced by Tetra Pak a leading company in the industry the TBA8 1000S model was launched in 2006 This model is renowned for its reliability and high level performance key aspects for high speed bottling operations Speed and Capacity Secondly the TBA8 1000 Slim offers an impressive speed of 6000 BPH bottles per hour demonstrating its capability to handle high production volumes without sacrificing quality or efficiency Containers and Formats Thirdly this machine is designed to work with Brik type containers optimal for a wide range of liquid products Specifically it handles 1 0 L formats meeting the  ...

Used DAL TOSO Filling Machine up to 4500 Lt h Introduction to the Filling Machine DAL TOSO The used DAL TOSO filling machine constructed in 2011 emerges as a perfectly reliable option for bottling operations Boasting a nominal speed of approximately 4500 liters per hour this system therefore proffers consistent performance and unparalleled versatility for an array of products Description of the Machinery The machinery comprises a filler with 20 taps each outfitted with a 22 mm diameter straw Furthermore all components in direct contact with the liquid are meticulously crafted from stainless steel 316 thereby ensuring maximum hygiene and resilience against corrosion A dedicated pump efficiently channels liquid to the filler while the inclusion of false bottles facilitates the thorough cleansing of taps The bell adjustable in height via electric drive confers adaptability in accommodating  ...

Used Filling Machine AL AMANE Aman Pack C30 01 Used Filling Machine AL AMANE Aman Pack C30 02 Used Filling Machine AL AMANE Aman Pack C30 03 Used Filling Machine AL AMANE Aman Pack C30 04 Used Filling Machine AL AMANE Aman Pack C30 06 Used Filling Machine Dairy AL AMANE Aman Pack C30 2019 The new machine Aman Pack C30 is a filling machine of high performance reliable and economical use simple to use and maintain which comes meets the needs of different customers with the following characteristics Low operating costs high efficiency Machine designed with easy operator access Stainless steel that meets European standards 304L stainless steel frame All parties having contact with milk are in 316L stainless steel Connection to CIP system possible High and efficient production rate of 2800 cartons per hour for the 500 ml Compact The types of packaging dosed by the used filling machines Aman P ...

CANS TINS Filler 8 1 New for sale This filling machine is equipped with new Proportional Flow Regulator PFR technology and is using Japanese step motors Maximum microbiological safety by contactless filling The filling accuracy is always guaranteed through every individual load cell and with every single bottle in every cycle With the help of the latest technology actuators with step motors every individual valve has its own proportional valve The target filling value is always matched correctly The Proportional Flow Regulator technology is able to adjust the flow of the product proportionally The machine utilizes Japanese step motors and actuators It does not consume air and so it does not have any air collectors This reduces the costs of the compressor power consumption and maintenance Every nozzle has its own load cell at the bottom of the bottle base platforms The electronic pre expu ...

Used Filling Machinery Bertolaso Olimpia 30 up to 5500 bph Overview of the Olimpia 30 Model The Used filling machine Bertolaso Olimpia 30 up to 5500 bph stands out for its efficiency But also for it s versatility in the bottling sector Made in 2004 this model is designed to handle up to 5500 bottles per hour bph a remarkable productivity index for medium sized plants Its structure is optimized to work with cylindrical and conical containers ensuring gentle but effective handling Technical features A fundamental element of the Olimpia 30 is the anti clockwise rotation of the system which facilitates operation and maintenance The machine is equipped with 30 valves ensuring precise and uniform filling The filling process uses a gravity and light vacuum system with fixed nozzles to ensure accurate filling and minimize the risk of oxidation particularly for products such as wine Safety and Ma ...

Fully automatic liquid filling machine with 8 filling heads for filling volumes of different alternative ranges: ONE of the following ranges can be choosen from: a.) 25-250, b.) 50-500 or c.) 100-1.000ml. Conveyor: adjustable speed control, MITSUBISHI touch screen, bottle mouth positioning system, filling heads moved down and up during filling process (foam products). - No-bottle-no-filling device, suitable for various liquids (cosmetics, perfumes, flower oil, liquor, etc.). Stable performance and accurat filling with cold and hot liquids. -Specifications: max. speed of the machine in neutral: 80 cycles/minute | stainless steel version | power supply: 220V | compressed air: 6bar: power consumption and consumption of compressed air depending on filling volume range - machines dimensions too. That machine/system is available in different versions for different packaging sizes and with diff ...

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...