filling machine 25 used for sale

4-lane VFFS for the packaging of granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min) | bag sizes: L(50-250)xW(55-102)mm | film width: 520-900mm | power: 380V, 6,3kW | compressed air: 1,4m?/min, 6bar | machine dimensions: L1800xW1600xH1760mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from appr ...

Filling and Depositing machine MINI-FILL 100 - demo-machine, brand-new condition, year of manufacture: 2025 - all-in hopper with built-in impeller system, machine housing made from food-approved plastic, multi-colour-touch screen control panel with adjustment of impeller speed, dosing volume and reverse function, machine suitable for single dosing, automatic dosing with pre-set counter or continous dosing with hand gun, 8 liter-hopper made from food-approved plastic with lid double outlet D = 11,1 mm and 6-teeth gear for semi-liquid, soft and airy products, two pieces injection needle D = 6,52, L = 50 mm, electrical supply: 230V/50Hz/1~, power supply: 100 W

Stock number: F1069, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Total height: 1550 mm, Conveyor: L 2000 x W 83 mm, Filling heads: 2 pcs Ø 10 mm, Manufacturer: J. Kugler & Co., Type: Minimat, Year: 1979

Stock number: F1097, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Conveyor: L 3650 x W 82 mm, Filling heads: 4 pcs Ø 10 mm, Manufacturer: Hero de Groot NV

Stock number: F1096, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dimensions: L 3250 x W 1600 x H 2000 mm, Total height: H 2000 mm, Theoretical capacity: Estimated 900x5 l/h, Filling heads: 3 pcs. with cut and neck filling, Dosage: Variable dosing, theor. 0-20 l, Conveyor: L 3250 x W 195 mm, Type: MS, Model: Combi 2

Stock number: F999, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-620 ml, Manufacturer: Trepko, Type: 620, Other: Product funnel

Stock number: F994, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-540 ml, Filling heads: Filling nozzle with clip, Manufacturer: Obrut, Other: Product hopper - Foot switch - Compressed air driven

Stock number: F1074, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling/closing machine, Conveyor: Throughout lamella conveyor W 100 mm, led at an angle, Dosage: 2x0-100 ml, and 2x0-300 ml format set, Filling heads: 2-headed piston dosing (prepared for 4-headed) - 10 mm filling nozzle with cut, Capsule: For liquid dosage in bottles, and closing with screw capsule, or trigger capsule, Manufacturer: Flowcip Monoblock, Type: Bottom-up filling, Other: Safety shielding - Separately Ink Jet - Misc. format set for differently bottles and capsules - Incl. vibrator sorting

Stock number: F987, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-1500 ml, Variable speed: Yes, Manufacturer: Trepko, Type: 620, Other: Product hopper

Stock number: F963, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dosage: Airdriven piston dosage with clip, Piston dosage: 0-1 l/stroke, Manufacturer: LKF, Type: 101, Other: Product hopper

Stock number: F969, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Dimensions: L 500 x W 400 x H 400 mm, Total height: H 700 mm, Piston stroke per min.: Max 28 SPM, Variable speed: Yes, Filling heads: 1 pc., Dosage: 0-75 ml, Motor: 220 Volt, Manufacturer: Lindeløv & Striegler, Type: Packmaster, Model: D. C. 300, Year: 1973

Stock number: F985, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-1 l with clip, Stations: 8 pcs round table filling, Capacity: Approx 1500 pcs/h depending on dosing and product, Manufacturer: Hansen & Fredsgaard, Type: RTHF, Other: Product funnel

Stock number: F962, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dosage: Compressed air driven piston dosing with clip, Piston dosage: 0-1 l/stroke, Manufacturer: LKF, Type: 100, Other: Product hopper

Stock number: F961, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dosage: Compressed air driven piston dosing with clip, Piston dosage: 0-1 l/stroke, Manufacturer: LKF, Type: 100, Other: Product hopper

Stock number: F902, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Filling heads: 10 pcs., Manufacturer: ADA, Type: 2, Other: Pump with balance tank

Stock number: F903, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Filling heads: 4 pcs, Manufacturer: ADA, Type: 2, Other: Balance tank - Sliding rail

Stock number: F924, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-300 ml, Double jacket: For hot filling of product, Stations: 12 pcs, Table: Circular table model with Ø 67 mm cassettes, Other: Prepared for laying on capsules and capsule tightener

Stock number: F897, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Dosage: With bottom-up filling and piston dosage, Filling heads: 4 pcs Ø 18 mm, Manufacturer: Minab, Other: Product tank - Excl. conveyor

Stock number: F889, Materiale: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Juice dispenser, Capacity: Max 60 °Bx, Other: For mix and dosage of concentrates

Stock number: F890, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Filling heads: 1 pc. with counter, Variable speed: With hose pump, Conveyor: L 1500 x W 100 mm, Year: 1982, Other: Sluice system

Stock number: F753, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Fyldemaskine, Piston dosage: 0-12,5 l/stroke, Filling heads: 4 pcs with bottom-up filling and cut off, Conveyor: Prepared for conveyor, Balance vat: L 1080 x W 500 x H 350 mm, Manufacturer: Alwid Universal D, Other: Drip tray

Stock number: F764, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Hanging: In aluminum frame, Variable dosage: Max 2x1,5 l, Manufacturer: LS, Type: Double, Other: Air driven

Stock number: F717, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling line, Capacity: Max 6000 pcs/h, Item 1: Bottle erector, Manufacturer 1: Rondo unscrampler, Type 1: 752, Traks 1: 10 pcs., Item 2: Filling maschine, Filling heads 2: 12 pcs. carousel type, Dosage 2: 0-500 ml, Item 3: Capping machine, Other 3: For screw caps with insert

Stock number: F661, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Manufacturer: Recomatic, Pump: Doseing loberotor pump, type SSP 100 NDM, Other: Air driven

Stock number: F665, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Filling heads: 10 pcs, Dosage: 100-2500 ml, Capacity: Max 3000 pcs/h, Manufacturer: ADA, Type: 1, Other: With exit conveyor - Balance tank

Stock number: F647, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-500 ml, Filling heads: 4 pcs., Manufacturer: Vollenda, Type: CA3000, Other: Bottom filling - Drip tray - Balance tank - Air driven

Stock number: F653, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cup filling/closing machine, Piston dosage: 50-550 cm³, Theoretical capacity: 2500-4000 UPH, Filling heads: 2 pcs. - Ø 80, and Ø 91 mm, Double jacket: Product container with double jacket, Lid: 2x2 lid magazine with pressure station, Manufacturer: Gasti, Type: Doga Therm 41S, Other: Cup magazine - Cassette conveyor with 2 formats

Stock number: F630, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Piston dosage: 0-0,2 l, Filling heads: 1 pc., Manufacturer: Trepko

Stock number: F649, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling/closing machine, Dosage: Vertical turning type with double dosing, Closing: Cork put in and capsule put on, Sort out: Double sort out for cork/capsule, Other: Control panel - Stainless conveyor

Stock number: F543, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: On rack with wheels, Piston dosage: 0-2 l, Manufacturer: LS, Other: Air driven

Stock number: F624, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling/closing machine for test tubes, Model: Circular table model with;, A): Sorting of test tubes, B): Sorting and mounting of o-ring, C): Filling, D): Sorting and mounting of capsule, E): Available, F): Exit

Stock number: F461, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Bag packing machine, Manufacturer: Uhlmann, Type: HS III/S, Other: With vibration sort out of unit for strip pack

Stock number: F542, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: On rack with wheels, Piston dosage: 0-500 ml, Manufacturer: LS, Other: Air driven

Stock number: F385, Material: Rustfrit stål AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Manufacturer: Seal-O-Matic, Model: For Pure-Pak® cartons, Type 1: 1 pc. carton former Seal-O-Matic type 140, Type 2: 1 pc. carton filler/closer Seal-O-Matic type 240

Stock number: F338, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: 4 pcs legs, Filling heads: 10 pcs, Capacity: Approx 3000 pcs/h, Manufacturer: ADA, Type: 1, Other: Sliding rail - Balance tank

Stock number: F343, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: 4 pcs legs, Piston dosage: 0 - 350 ml, Filling heads: 1 pc., Hopper: 40 l, Manufacturer: Hamba, Other: Packaging lift - Air driven with pedal actuator

Stock number: F271, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: 4 pcs wheels, Piston dosage: 0-0,55 l, Filling heads: 1 pc., Manufacturer: G+W - Günther & Walker, Other: Product funnel - Hydraulic

Stock number: F280, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: 4 pcs legs, Piston dosage: 0-750 ml, Manufacturer: Trepko

Stock number: F326, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Bag filling machine, Manufacturer: Uhlmann, Type: HS III/S, Other: Vibration out sorting of subject to strip pack

Stock number: F1061, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Dimensions: L 400 x W 400 x H 240 mm, Total height: H 550 mm, Piston dosage: 0,1-4 l, Variable speed: 2 variable filling speeds , Filling heads: 1 pc. Ø 18 mm, Manufacturer: Roto-fill, Model: MS25H, Year: 2021, Other: Foot pedal

Stock number: F1060, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs, Item: Filling machine, Standing: Table model, Dimensions: L 400 x W 400 x H 240 mm, Total height: H 460 mm, Piston dosage: 0,1-4 l, Variable speed: 2 pcs variable filling speeds, Filling heads: 1 pc. Ø 10 mm, Manufacturer: Roto-fill, Model: MS15T, Year: 2021, Other: Foot pedal

Stock number: F1053, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Piston dosage: 0-1 l/stroke, Filling heads: 2 pcs Ø 18 mm, Manufacturer: Axomatic, Type: Jolly DPL2, Year: 2007, Other: Air driven - Foot pedal

Stock number: F1050, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: Table model, Piston dosage: 0-100 ml/stroke, Filling heads: Ø 8 mm with clip, Manufacturer: Würschum, Model/type: PS 100-NV, Year: 2002, Other: Air driven - Foot pedal

Stock number: F1034, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Standing: 6 pcs. legs with wheels, Dimensions: L 2180 x W 1060 x H 1650 mm, Lamella conveyor: L 2000 x W 82 mm, Piston dosage: 100-1.500 ml, Manufacturer: Trepco, Other: Cup magazine - Lid magazine

An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible.

Used packaging machine made by Hugart, type: DS 5000. Capacity 5000 pcs / h. New: 2013.

Used packing machine made by Hugart, type: DS 7500. Capacity: 7500 pcs / h. New 2010. Fi 95 mm.

Bosch (Syntegon) GKF 2600 intermittent capsule filling and closing machine for the filling of powder, filling station at station no. 5 for micro-dosing (DPI or pure API), capsule body scan at station no. 3, pneumatic and contactless capsule top scan at station no. 4, integrated gravimetric random sampling inspection for statistical gross fill weight control (position 3), additional integrated gravimetric random sampling for statistical net weight control of the filled capsule (gross – tare = net), 100% net weight determination by means of NWDS (Net Weight Detection System), powder hopper with a volume of 17 litres, empty capsule hopper with a volume of 15 litres, includes format parts for capsule size 3, with the correct format parts suitable for capsule sizes 00-5, capacity up to 156,600 capsules per hour, automatic trouble shooting (ASB) with In-Process Control (IPC), electronic reco ...

Fully automatic system for filling, sealing and sealing crucibles

Tube filling and sealing machine for PE and laminate tubes, mechanical max. 60 tubes/min., built in 2000, D.35 and D.50 formats