filling machine 25 used for sale

grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW The data for this ad was created with ModulMWS - the  ...

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 750 mm cutting width: 170 x 310 mm cutting speed: 25 - 90 m/min : 130 mm : 130 mm : 205 mm Impact energy: 205 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm blade length: 250 mm angle adjustable from - to: fest 90 Grad table surface area: 900 x 800 mm total power requirement: kW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2. Other and Auxiliary Systems - SNA SNA-08. Air Technology System, 2 units Type Wolf KG 250, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH Technical Data: 20250 m³/h; 10 kW; 1500 rpm; 1050 Pa Motors: 71M01 LOHER DNGW 160LB 04A; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 71M02 LOHER DNGW 160VB 040; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

Engine: 10 hp (7.5 kW) Year: 1999 Cutting chamber: 450 mm x 350 mm Others: With electrical panel

2x Water Pumps NEW 22kW 230m³/h H: 22.5m n: 1450 min LENZE electric motor type MDERAXX180-32J 22kw 1470min

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

• For packing blisters in folding box cartons Output max. 500 cartons/min, the max. speed depends on the format/product Folding carton format range max. W 80, H 90, L 155 mm For double-sided offset or same-sided tuck-in flaps Blister stacking device Max. 10 blisters per stack / max. height 85 mm Blister refill chute, manual 3 suction arms for folding box pick-up and counter-suction for pre-breaking MB-Bäuerle CAS 21/4 net leaflet folding and inserting machine from the magazine Color embossing printing unit on both sides Faulthy package ejection with counter-check HMI B+R Automation, IPC Beckhoff Servo controller Elau MC-4 with control unit Elau C600 Drive 400V/50Hz, rated current 6A / back-up fuse 25A Various accessories such as format parts / spare parts Infeed blisters via Flexlink conveyor

Viessmann refrigerated cabinet model TectoDeck SV3 – your perfect solution for the attractive and efficient presentation of refrigerated goods. With an impressive length of 5 metres, this used refrigerated cabinet is ideal for supermarkets, grocery stores and other retail environments that require reliable and large-scale refrigeration. The TectoDeck SV3 fresh food safe model offers two rows of shelves and a lower shelf, so you can present your goods in the best possible way. The ergonomically optimized design ensures the best view of goods and easy loading and removal of goods. More assortment depth and a larger display area are guaranteed by this refrigerated cabinet. It also uses an environmentally friendly refrigerant, which is both environmentally friendly and easy to clean and service. Thanks to flexible installation options in the store and only one power connection (230V), t ...

Used autoclave ASCA, type: 250 E -renewed- - Boiler capacity: 250 litres - Electrically heated - Boiler, core temperature and F-value adjustable - New temperature sensor - New drain hose - Electrics completely checked - Digital control - Auto-signaling - Device on wheels, mobile - Condition: Very good, ready to use The device is in pristine condition and is ready to use right out of the box. Visits and test runs are possible by arrangement.

Fristam FP 752/250 VB - High-pressure centrifugal pump - 45m3 at 12 bar - 30 kW - Double schaft seal - Serial numbers: 0482550073 + 0482550074 - Excellent condition 2 pumps available

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 15 mm V-RING   nominal force: 75 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm   distance between columns (H-frame): 560 mm   passline opening (free passage in side columns): 270 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step max.: 9 ...

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Section bending tools included: tubedia 50 mm amp; 80 mm Number of rolls: 3 rolls Roll capacity cold: 2550 x 15 mm Profile bending machine: yes Pre-bending : yes

Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown

Manufacturer: Hackemack, Type: 2540, Year: 1995, Working widht mm: 1300, Working height in mm: 950, Conveyor lenght mm: 11000, Through running hight mm: 90, Thermal output: 2 Register, Feedin speed m/min: 5-20, Belt conveyor: yes, Flat spray nozzle: yes, Round nozzle: Flachdüse, Damper register - items: 2, 1st Damper register kW: 65, 2nd Damper register kW: ca.50, Year :1995

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Manufacturer: Nolting, Type: SUR 2500, Year: 1999, Heating power in kW: 2500, Fuel type: Späne, Heating medium water: yes, Year :1999

Hersteller : Siemens, Type: CPS 256, Control: PC 612, Serial number: B 1200-C963, Axis card: X7181, Plug-in card: C.N.I, Card number: 7187.20,

Manufacturer: FIDI Destlliergerät, Type: RS 250 AX, Year: 2016, FREETEXT1: Füllkapazität 20-30 Liter, FREETEXT2: Kesselvolumen 40 Liter, FREETEXT3: Lösungsmittel 4-5 Stunden, FREETEXT4: Spülwasser ca.12 Stunden, FREETEXT5: Abkühldauer 3-7 Stunden, FREETEXT6: Betriebtemperatur 50-200 Grad, FREETEXT7: Kw Leistung ca 2,1, Year :2016

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla, Type: TN 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Length mm: 2500, Working widht mm: 1400, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla Transportrollengang, Type: TR 2500, Year: 1999, Working length mm: 2500, Working widht mm: 1400, Total hight mm: 900, Engine power kW: 0,75, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Movable: no, Manufacturer: Cefla Transportrollengang, Type: TR 2500, Year: 1999, Working widht mm: 1400, Working widht mm: 1400, Year :1999

Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

GENERAL Project No.: 905722 Quantity: 1 pcs. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year of Make: 2003 Condition: Used machine DESCRIPTION TURN Max. turning diameter 356 mm Max. turning length 655 mm Max. circumferential diameter over bed 520 mm Max. rotation diameter over face slide 250 mm Max. circumferential diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 18 kW Spindle passage main spindle 75 mm Spindle Flange Size Main Spindle A2-8 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Tailstock NC-controlled 1 turret on top Number of stations/powered by 12/12 Speed tool drive 6000 1/min Axles in the turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse speed in X/Y/Z 18/-/24 m/min OTHER EQUIPMENT Tool life monitoring Spla ...

Manufacturer: Höcker, Type: K 35/250 Späneventilator, Year: 03/2004, Engine power kW: 18,5, Flow rate approx. m3/h: 5700, rotations rpm: 1500, V-belt drive motor: yes, V-belt pulley impeller: yes, Suction side mm: 250, Outlet side mm: 350, Wight approx. kg: 420, Year :03/2004

grinding diameter: 420 mm grinding length: 2500 mm swing diameter: 870 mm centre distance: 2700 mm workpiece turning speeds: 1-164 U/min total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BACCI FC 8 2500 linear milling machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Sanding 3kw Sanding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE Certified Machine weight 5100kg

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: NESTRO Model: NE 250 J Year of Manufacture: 2023 Type of Machine: Dust Extractor Operating hours: 551.3 h Technical Specifications - Rated Airflow Volume: 2,950 m³/h - Rated Negative Pressure: 2,526 Pa - Filter Area: 22.4 m² - Connection Diameter (Suction Port): 250 mm - Weight: 930 kg - Max. Compressed Air Pressure: 8 bar - Motor Power: 5.5 kW - Operating Voltage: 400 V - Rated Speed: 3,000 rpm - Rated Current: 9.5 A - Frequency: 50 Hz Find more here - / Contact us at -

DC shunt motor 138 kW with tachogenerator and external fan Armature 460 V 325 Amp Field 340 V 4.7 Amp 1880 rpm IP23

DC shunt motor 138 kW Armature 460 V 325 Amp Field 340 V 4.7 Amp 1880 rpm IP 23

Key data: 200 KW, 250 kVA, 400 V

The Electroquell 250 kVA (200 kW) generator is suitable as a main or backup power source in factories, hospitals and public facilities. The Ricardo engine ensures high performance. Ricardo Euro V-engine ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing made of Al.-Zn. sheet metal Drip pan Engine heating Power: 250 kVA / 200 kW Voltage: 400 V Current: approx. 361 A Large capacity fuel tank Additional options: ATS, remote control, enlarged tank Warranty: up to 60 months

Max pressure: 250 ton Table size: 620 x 600 mm Between columns: 620 mm Max opening: 500 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 6 ton

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Find more here - / Contact us at -

capacity 90 degrees: round: 110 mm capacity 90 degrees: flat: 255x160 mm capacity 90 degrees: square: 210x210 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 165x110 mm cutting range 45 degree right side: square: 150x150 mm cutting speed: 11/13/17/22/26/34 m/min stroke speeds: 50/64/82/100/128/164 Hübe/min dimensions of saw-blade: 400x36x2 mm power requirement: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

swing diameter: 640 mm max. turning passage: 640 mm control: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - - bar material dia.: 65 mm chuck diameter: 200 - 315 mm spindle bore diameter: 80 mm diam. of main spindle in forward position: 120 mm --- Subspindle ---: - - - - - - bar material dia.: 65 mm chuck diameter: 315 mm spindle bore diameter: 80 mm forward bearing diameter: 120 mm - - - - - General data - - - - -: - - - - - - spindle distance: 1.500 mm turning length: 1.185 mm Main-/Counter -spindle turning speeds: 5.000 U/min driven tools turning speeds: 12.000 U/min Slide cross: X1, Y1: 550 / 180 mm Slide cross: Z1: 1.185 mm Slide cross: B1: 240 ° Slide cross: X2: 180 mm Slide cross: Z2: 1.050 mm Slide cross: Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret fo ...

- AISI 304 stainless steel Equipment: - Round manhole with handwheel - Level indicator - Tester - Floating lid, air chamber and pump - gallows - Partial drain, Friedrich ball valve no. 2 40 - Total drain, Friedrich ball valve no. 2 40 Dimensions: - Ground clearance: 315 mm - Diameter: 1690 mm - Height: 2180 mm

Inv. Num. : 6496 Type: BCE 1-45-25D Producer: Battenfeld Created: 2007 Parameters: Switch-on hours: 47000 h Table dimensions: 2500 x 400 mm Screw length: 25 mm Screw diameter: 45 mm Material: PVC Towing speed: 3.5-50 m/min Head diameter: 45 mm Machine dimensions: 2580 x 900 x 1100 mm Weight: 1030 kg Line Components: Calibration table type CT2500/V1 Extruder Type 1-45-25D Towing type B100E

Control SAFAN ... TS 1 Thrust... 50t Bending length ... 2550mm controlled axes ... 4 Drive... Electric Max. ram stroke ... 215mm Main engine power ... 9kW Machine weight ... 5050kg The machine is in good condition, possible to test under power.

Note: The pictures serve to illustrate the material. - The workbench frames are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Borehole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,250 mm Particleboard depth: approx. 700 mm Surface: coat ...

Equipments: as is Good condition Overtemperature protection max. 170°C Plant power max. 7.5 kW PUR gluing unit