filling machine 25 used for sale

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1460

Warehouse number: 3691 CNC ROTARY TABLE Manufacturer: Hydex, Type: AT-250 - 5 Axis Year of construction: 2022 Specifications: Table size 250 mm Center Height 320 Spindle hole 75H7 mm CNC control 2 ashes revolutions 50 per min Control Fanuc-Mitsubishi-Siemens-Heidenhain

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 250 mm -Bolt circle: Ø 225 mm -Passage: Ø 76 mm -Dimensions: Ø 250 x 110 mm -Weight: 25 kg

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 500

; Gross weight [kg]: 16160; Engine: Cummins QSK60-G4; Accessories: Battery, Control Panel, Including heater and battery charger

ATEX stainless steel 316 3V Tech 250 FPP/SD FM nucha filter dryer with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industry. Material Stainless Steel 316/316L Technical characteristics Model 250 FPP/SD FM Year of manufacture 2010 Working body pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Working pressure half-round/liner -1/+10 bar Working temperature of half round/shirt -25/+200 ºC Half-calf/shirt volume 80+20 L Filtration area 2.5 m2 Equipment Setup ATEX Electrical panels Bag filter Hydraulic power plant Centrifugal pump Transportation Information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 Kg Unused

workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 24000 kg length: 5000 mm width: 2500 mm loading area height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal rotary table / dividing head Hahn & Kolb with three-jaw chuck Ø 250 mm. Areas of application & details: Horizontal rotary table from Hahn & Kolb for precise rotary and partial machining, suitable for milling machines, machine tools and fixture construction. Stable industrial design made of grey cast iron, precise indexing via worm gear, equipped with a large 3-jaw lathe chuck Ø 250 mm for solid round parts, shafts, pipes and flanges. Ideal for bolt circles, grooves, gears, shaft machining, CNC preparation, training toolmakers. Compatible with almost all milling machines with T-slot table, e.g. Deckel FP1/FP2/FP3, Maho MH400/600/700, Hermle UWF series, Schaublin 13/22, TOS FNK/FNGJ, Kunzmann WF series, Avia FND/FNC. As well as comparable tool milling machines, radial drilling machines and column drilling machines. Reliable clamping technology for round parts, professi ...

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Number: 3x mounting brackets available -Price: per piece -Dimensions: 280/250/H290 mm -Weight: 13.5 kg/pc.

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/180/H280 mm -Weight: 10.7 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/160/H280 mm -Weight: 11 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Dimensions: 280/250/H320 mm -Weight: 13 kg

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Holder for punching tool -Holes: Ø 60 mm -Dimensions: see photos -Dimensions: 253/71/H104 mm -Weight: 6.6 kg

Semi-automatic band sawing machine Saw blade size: 2910 x 27 x 0.9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm

Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 2,550 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm

diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V / 205AH LI-ion weight of the machine ca.: 3,9 t dimensions of the machine ca.: 3,57 x 1,15 x 2,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marble plate STOLLE Length: 3500 mm Width: 2500 mm Thickness: 305 mm Height on feet: 900 mm Delivered with 12 levelling feet Weight: 6,3 T

Mixer 250 liters of twin-shaft with blades – brand new! The machine has 2 reverse gear motors ×1.1 kw or total power 2.2 kW. Main characteristics: Designed for homogeneous mixing of food products; Made entirely of stainless steel; Completely silent mixing process; Two working augers with blades; 2 new front discharge valves; Easy cleaning of the machine; Built-in two silent gear motors of the highest class; Protective cover with limit switch; Built-in electric. Part of it has moisture-proof control buttons. Reverse mixing system in both directions; Capacity: 250l.; Installation power 2.2KW, 400V, 50Hz;

Offered is a single-column eccentric press, manufacturer Schuler. Press force: 63t, throat depth: 250mm, max. stroke: 8mm-100mm, max. stroke rate: 160strokes/min, bed area X/Y: 710mm/500mm, slide area X/Y: 450mm/280mm, slide adjustment: 63mm, max. distance between bed and slide: 415mm, including a safety screen at the working area. Machine weight: approx. 3900kg. Inspection possible by arrangement.

Power supply, power supply unit, ballast, driver Manufacturer: GIB Lighting, ballast -Type: Pro-VT 250W -Quantity: 10x ballasts available -Price: per piece -Dimensions: 185/90/H80 mm -Weight: 3.7 kg/pc.

For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.

Hacker TH 250/650 with metal detector, sieve..

Paneling Finn-Power Bending Automation Mod. Bending Cell Type BC 2550 200 year 1999 Hours: 27.800 This machine is in good condition and worked for few hours. I point out to you that there is an oil leak wich comes from a cylinder. The machine is functioning and in case of your visit, it can be connected again.

NAKAMURA WT 250 CNC Fanuc, Series 16i-T Main spindle, counter spindle 1 tool turret with driven tool stations + 1x Y-axis 1 tool turret with driven tool stations 2x C-axis Conveyor Bar loading magazine IEMCA TS560P The machine is energized in our warehouse in Gussago BS.

weight max. in kg: 2500 kg fork length: 1100 mm stroke: ? mm total power requirement: ? kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main spindle control, RAC 2.3-250-380-A-00-W1, Indramat Bosch Rexroth, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The high quality part comes from a spare parts stock of a mechanical processing of a large automotive manufacturer. The main spindle control was repaired by Bosch Rexroth. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

brinell hardness: xx rockwell hardness: xx throat: x mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement.

This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details.

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x2500 SMO-2506-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade cl ...

CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details.

No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-2580-CNC OT-41 Specifications - Nominal pressure: 800 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 320 mm - Distance between side frames: 1900 mm - Max backgauge distance: 600 mm - Nominal motor power: 5.5 kW - Weight: 4200.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CN ...

The machine is ideal for professional use in the workshop, locksmith's shop or metal construction as well as for demanding do-it-yourselfers. Model: MOD 250 Drive / connection: 400 volt high-voltage current (CEE plug) Speeds: 2 levels selectable (Lento / Veloce) via control panel Coolant Facility: Integrated Coolant System (Coolant Pump Available) Equipment: Solid vise with quick adjustment/handwheel Degree adjustment / mitre cuts possible Integrated base / base with storage compartment Belt tension meter / pressure gauge on the saw bracket Circuit breaker & control clearly arranged on the control panel Condition: Used with signs of wear and tear (see pictures). Stable and fully functional from workshop liquidation/stock. Note: A visit and a function test on site are possible by arrangement.

Stock number: 3754 HYDRAULIC PRESS Manufacturer: STENHOJ, Type: 25T TE Machine NO.: 54718, Year of construction: 1988 Specifications: Table size 620 x 380 mm Stroke length 300 mm pressing force 25 ton Weight: 1600 kg

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 64 - 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg