137,869 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Cefla, Type: TR 2500, Year: 1999, Length mm: 2500, Working widht mm: 1400, Drive power kW: 0,26, Year :1999
Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,
Key data: 200 KW, 250 kVA, 400 V
MODEL: EQ-D250200 ENGINE: Deutz BF6M1015C-LA G1A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3300kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...
Complete clean air extraction system with briquette press and piping with gate valves, etc. Extraction system for woodworking companies with briquetting press undermounted. Aspirator ALKO Type: MOBIL-JET 250 Year of construction 2003 Extraction diameter 250 mm Nominal capacity 4900 m³/h Motor power 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm with suction control for automatic slide control. Briquette press WEIMA/ ALKO Type: APC30S Year of manufacture 2007 Motor power 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm incl. complete piping with branches, bends, valves. there would be another batch of extraction pipes with fittings, which can be purchased cheaply. Plant has been dismantled and packed ready for loading. Condition see pictures, or follow the item description. Parts can also be picked up ...
RAANTEC DELTA 250 UV – Converting Year of Manufacture: 2003 ________________________________________ Product Description: Web width: max. 10 inch – 254mm 1x die-cutting unit 1 x inking unit UV Flexo 1-colour with corona and dust removal 1 set of impression cylinders Unwinding 850mm Winding on large roll and small roll possible Ran all the time only in single-shift operation. Machine Specifications and Equipment: ________________________________________ Accessories Included: Manuals Keys etc. ________________________________________ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) ________________________________________
Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55
IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such ...
Zum Verkauf steht ein Fräskopf bei der Firma Pfauter ca.2012 komplett überholt.
used
Technical data of the shelf connector: Shelving system: Polypal The scope of delivery includes: 01x Shelf connectors, used for shelf spacing: 250 mm Total length: approx. 310 mm U-profile dimensions: approx. 50 x 15 mm Material colour: sendzimir galvanised Material thickness: approx. 2 mm Drill hole Ø: 10 mm Weight: 0.270 kg | Pcs. Incl.: 02x Screws M10 x 35 mm 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Key data: 200 KW, 250 kVA, 400 V
Generator Set Specifications: Model: EQ-I250200 Primary power: 250 kVA / 200 kW Standby power: 275 kVA / 220 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TE8P Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3770 mm Width: 1350 mm Height: 2370 mm Weight Open: 2790 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil l ...
DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz ...
Two used ABB BBC turbochargers ABB VTR 254-11 HT:398345 HT:398344 Turbochargers still need to be tested and assembled ! Both turbochargers are disassembled on request I send them photos !
1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm
Gardner Denver/Rietschle CLFEH 251 V with 7.5 KW AC-Motor, 250 m3/h, Final pressure: - 10 mbar, completely overhauled with all wearing parts, 1 year warranty
Becker rotary vane vacuum pump VTLF 2.250/0-79 with 5.5 KW DS motor, 250 m3/h, final pressure: - 800 mbar, completely overhauled with all wearing parts, 1 year warranty
Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.
STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...
Lompas DN 250 GE FANUC Control Cabinet Control panel + Electric box for Lompass Lompass - armadio dei comandi terminale Lompas DN 250 Control cabinet + operator terminal Year of construction 1998 Control cabinet with control panel (control panel) for Lompas DN 250 pallet nailing machine; GE FANUC Series 90-30 Control; Control panel for machine operators; Ready for use until dismantling in June 2021, ready for loading #GE Fanuc Series 90-30 #GE Fanuc #GE #Lompas Original control switchboard from Lompas DN 250 with GE FANUC Series 90-30 System; price including Control Switchboard + manual control panel; System Work! dismanteling in June 2021, ready to load. Armadio di controllo originale con pannello di controllo per inchiodatrice pallet Lompas DN 250; GE FANUC Series 90-30 Controller; Pannello di controllo per operatori di macchine; Pronto per l'uso fino allo smontag ...
PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW
250 Ton x 5100mm Over Bed CNC Press Brake. Admitting 4500mm Between Side Frames. 3000mm Long Heavy Duty Back Gauge. Including Cybelec DNC 800 8 axis control. (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing. Infra-Red Operator Guards. Hydraulic Top Tool Clamping. Side & Rear Safety Fences. Tooling Carousel. S/No 97P288. New 1997
Linear drive, spindle axis, stroke 1135, EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo spindle axis, linear module, liner drive, linear slide EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Overall dimensions: 1625x130x110mm, approx. 55kg, slide 300x70mm, stroke 1135mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded i ...
Motor control card Bendingroller for TBA / 8 ASU
MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee
Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time
used
Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX610 Profile Dimensions: 76.2 x 63.2 x 1.8 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 2,250 mm Depth: 1,050 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 6 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 84 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!
25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 5 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 70 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!
25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 4 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 56 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!
Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg
IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...
4 pcs Bronze guide bush - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm from Oleopress and Idra. Weight approx. 20 kg - Outside diameter 271/278/265mm - Inner diameter 250mm - Tube length 275mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
4 pcs. Bronze collar bushing - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra. Weight appr. 20 kg - Outside diameter 278/271mm - Inner diameter 250mm - Tube length 250mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D30 ...
Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.
Continuously working melt filter New and unused machine Visit possible by arrangement.
Make: Fryma Line ML 250 / MZ 250 for soy milling, production of soy milk Perforated disc mill: 45 kW Colloid mill: 60 kW Capacity: approx. 7000 l/h (soy milk) Dimensions LWH: 1700 x 1500 x 1550 mm Weight: approx. 1100 kg
Aflösebehälter Zettelmeier -Content 250 litres -Built in 2012 -Power 12 kW -Stainless steel -with drain tap
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-250-PPSA-N3 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 610/55/H55 mm -Weight: 2.2 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 91 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Weight: 47 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston rod: Ø 38 mm -Dimensions: 168/168/575 mm -Weight: 18.4 kg
Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate
Tailstock, counter bearing for dividing head, dividing head -Peak height: 255 mm -Recording: MK4 -Dimensions: see drawing in the images -Dimensions: 600/220/H410 mm -Weight: 84 kg
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: ZF/hurth forklift drive HFK 250 -Wheel mounting: Dimensions see pictures -Bolt circle: Ø 270 mm M12 -Dimensions: 700/330/H285 mm -Weight: 69 kg
Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: with pressure plate, stroke 250 mm -Print plate: 200 x 140 mm -Cylinder: outside Ø 90 mm -Mount: bolt circle Ø 157 mm -Number: 4x cylinders available -Price per piece -Dimensions: 605/200 / H200 mm -Weight: 40 kg / pc.
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Admission: thread, dimensions see drawing in the photos -Dimension: Ø 250 x 85 mm -Weight: 9.3 kg
maximum number of results exceeded
please refine your search
