135,520 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Carl Zeiss Model: OVS 250 Machine type: Automatic glass grinding machine Current type: D Frequency: 50 Hz Operating voltage: 380 V Rated current: 7.6 A Control voltage with/without transformer: 220 V / 24 V Rated fuse current in the supply line, without/with increased delay: 20 A Wiring diagram number: 85 24 31 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 2700 kN, 29 g/PS
We offer this DESMA D 969.250 Z (S3) rubber processing machine in mint condition, built in 2021. Clamping force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive capacity: 72/39 l/min Pump drive current consumption: 32.0 A Pump drive power: 22 kW Nozzle application force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Hydraulic motor hours: 730 hours, Hydraulic pump (clamping force): 65 Hours, Operating System: active 3,360 hours Ideal for the production of: - Technical moulded rubber parts - Seals and O-rings - Automotive and industrial components Condition & Avai ...
Key data: 380 mm, 1019 mm
X-axis 234 mm Y-axis 100 mm Z-axis 1090 mm Tailstock 1075 mm C-axis 360° Drive power 26 kW Max. bar passage 80 mm Max. speed 4000 rpm Number of tool positions 12 Drive power milling drive 5.5 kW Max. spindle speed 5000 rpm Powered tool stations 12
Key data: 380 mm, 1000 mm
Main spindle Drive power 26 kW Max. spindle speed 4000 rpm Max. bar passage 77 mm Spindle nose A2-8 Revovler Drive power milling drive 5.5 kW Max. speed driven tools 4500 rpm Tool stations 12 Mazatrol Matrix Control Main spindle with full C-axis Tooleye Tool Measurement Chip Conveyor, Right Discharge Coolant pump 15 bar Interface for bar feeder Parts catcher Tailstock 3-jaw chuck B-210 Tool holder package: 7 fixed + 3 driven tool holders CE mark Documentation
Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mm turning speeds: 1000 - 6100 U/min bore slide stroke: 850 mm bore depth: 550 mm spindle distance: 240 mm dimensions: ca. 6 5 2,3 m Shipping weight: ca. 6000 kg Packing: ca. 10 Lademeter m : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece diameter: . mm threading length: . mm max. module: 10 min. module: 1 diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min Various reconditioned milling heads and other accessories available for HECKERT ZFWVG 250 long-thread and gear hobbing machines. - Heavy-duty gear hobbing head ApFW (reconditioned) - Heavy-duty thread milling head ApGs (reconditioned) - Thread milling head ApG (reconditioned) - ApGi internal milling head (refurbished) - Various bushing sets - Lunettes - Counterholder with 3-jaw chuck - Various milling mandrels and much more, as shown in the pictures If you are interested in individual items or the entire package, please send me your price proposal. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Edge banding machine Type: PROFIMATIC PM 2508-F Manufacturer: OTT Year: 2005 Hours: approx 300 Edge thickness: 0.220 mm Min width of the working part: 70 mm Min height of the working part: 8 mm Max height of the working part: 60 mm Min length of part: 150 mm Operating voltage: 400 V / 50 Hz Continuous speed: 1020 m/min Adhesive application: glue application cylinder with Vario Melt automatic dosing Working height: 880 mm Compressed air connection: 6 bar / 1/4 Dimensions: 8850 x 1250 x 1500 mm Weight: 4,000 kg Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Mori Seiki ZL 250 CNC Drehmaschine Hersteller Mori Seiki Typ: ZL 250 Baujahr: 1998 Zustand: gebraucht, unter Strom und in Produktion. Zubehör optional Weitere Informationen auf Anfrage
Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg
sheet width: 2500 mm plate thickness: 3 mm weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2000 kN, 434 g/PS, 55 mm
Arburg 570C-2000-800 Injection moulding machine with conveyor belt (259) Category: Injection moulding machines Brand: Arburg Number: 259 Availability: in stock Year of production: 2010 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 55 Injection weight [g]: 434 Injection pressure [bar]: 1650 Clamping force [kN]: 2000 Gap spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Minimum mould height [mm]: 300 Control Type: Selogica Tongue: English, German Installed power [kW]: 44.4 Working time [h]: 58238 Weight [kg]: 7510 Dimensions [mm]: 6000 x 1900 Feed hopper: NO Core string: 2x Robot connection: 67 Euro Air Valve: 1x + 1x double coil
: neu : ca. 10 Wochen ab Auftrags : Türkei : 39000 € : 744.9 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 155 ° : 110 mm : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the b ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 61800 € : 1168.02 € : 2550 mm : 2.5 mm : 1.5 mm : 3.5 mm : Motorisch : 3830 mm : 2200 mm : 1900 mm : 4050 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball roller ...
For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding line, built in 2019. The plant is in very good technical condition, is fully functional and immediately available. A tour under power is possible by appointment. The plant is designed for the cost-effective production of large-volume HDPE hollow bodies and sophisticated technical blow molded parts. It is a discontinuous 3-layer extrusion blow molding line with a storage head. Included in the total scope offered: - Piovan GMS-160 high-performance plastic granulator, built in 2023 - Piovan VM 500 extraction system - GWK/Technotrans refrigeration system The listed peripheral components are included in the offer price. If individual components or all accessories are not required, they can be removed from the scope of delivery and taken into account accordingly in the pricing. Main technical data: ...
Key data: 800 mm, 300 mm, 500 mm
Milling Machine VERNIER FV 250 E Travel X: 800 mm Travel Y: 300 mm Travel Z: 500 mm Cone: SA 40 Spindle speed: from 45 to 2000 RPM Table size: 1060 x 250 mm Horizontally + vertically tilting head Auto Feeds X - Y - Z Lubricant pump Voltage: 380 V Width: 1600 mm Depth: 2000 mm Total height: 1700 mm Weight: approx 2 T
turning diameter: max. 356 mm turning length: 1.255 mm control: M 730 BM MAPPS IV greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm distance between spindles: 1.511 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 91 mm max. bar capacity: 80 mm Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm axis stroke:: x-travel: 260 mm z-travel: 1.345 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 5,5 / 3,7 kW total power requirement: 50 kVA ...
The machine is in good technical condition; it can be tested by prior arrangement.
GASPARINI electronic folding machine mod. PSG-250/5000 FP FEATURES Axes: R – X – Y1 – Y2 , Z1 , Z2 Folding length: 5,100 mm Pitch between uprights: 4,555 mm Strength: 250 tons. Gooseneck: 465 mm Slide travel: 250 mm Distance between table-slide: 450 mm Control unit: delem Weight: 25,500 kg. Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year rebuilt: 2021 CE compliant. PROMECAN pneumatic tie-down. Self-centered lower table with pneumatic tie-down. 1,000 mm motorized backgauge ("X" axle) Height adjustment "R" axis 250 mm. CNC DELEM DA 66W. 4 adjustable motorized turrets Z1, Z2. Folded penetration (axis "Y1, Y2") Low voltage electric pedal operation. Emergency stoppages. Hydrodynamic anti-bending table by hydraulic pumping. Side protections. Level IV safety laser.
diameter of brush: Ø 250 mm width of brush: 80.0 mm turning speed range: 1450 U/min bore: Ø 24.0 mm Wire thickness: 0.3 mm Dust suction hood: 50.0 mm voltage: 400 Volt engine output: ca. 3.0 kW weight of the machine ca.: 90.0 kg range L-W-H: 820 x 450 x 1140 mm The BES 250 D brush deburring grinder is ideal for deburring the inner and outer edges of profiles and flat materials. Thanks to its powerful drive motor and robust construction, this machine is ideally suited for professional use in workshops. Product Features - Ball-bearing-mounted rotor ensures smooth operation and a long service life - Ideal for deburring cut edges, removing rust from metal surfaces, . and removing paint coatings,... - Comes standard with a 50 mm diameter suction port for connecting to a . dust extraction system - Powerful and low-noise drive motor - Low-vibration operation thanks to a sturdy, torsion-resist ...
used
Key data: 250 kN, 30 mm
warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG equipment included incl. Spruepicker screen ...
internal diameter:140 mm total power requirement:5,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:2,8 x 2,5 m max. workpiece weight:15 kg clamping dia. max.:140 mm clamping length:250 mm max. bore diameter to be ground:0,8-90 mm min./max. hole to grind:160 mm centre height:90 mm workpiece spindle stepless:112-1000 U/min
honing diameter:45-200 mm stroke:330 mm centre height:350-700 mm Motor output:1,5 kW Drill rods: Ø 60mm ? 3000mm long Ø 50mm ? 2600mm long Ø 42mm ? 1920mm long Ø 40mm ? 1920mm long Ø 26mm ? 1270mm long Ø 24 mm ? 1,000 mm long Ø 20 mm ? 2,000 mm long Typical features Feed: Infinitely variable in both directions Drive: Separate control of spindle rotation and vertical movement Centring: Manual or via dial gauge centring bridges Geometry & working range (approximate values based on the BO series) Drilling range (Ø): approx. 24 mm to 150 mm (depending on the drill rods and cutter heads used) Distance from table to centre of spindle: Variably adjustable (typically approx. 350 mm to over 700 mm for large commercial vehicle engine blocks)
x-travel:800 mm y-travel:250 mm z-travel:350 mm table-size:1130 x 250 mm no. of flutes:4 groove width:14/25 mm taper MK:4 spindle turning speed range:56 - 2800 U/min total power requirement:9,5 kW weight of the machine ca.:2009 kg dimensions of the machine ca.:1400 x 1700 x 2800 mm Documents:vorhanden
grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm
x-travel:2500 mm y-travel:935 mm z-travel:1000 mm table surface area:I 1615 x 800 mm table surface area:II 800 x 800 mm spindle taper ISO:50 milling head speed:60 - 3000 U/min feed speeds:1 - 3000 mm/min rapid speed:10 m/min total power requirement:45 kW weight of the machine ca.:18,5 t dimensions of the machine ca.:5 x 5 x 4 m with CNC HEIDENHAIN TNC 426 Universa Milling Head -C-axis automatic Horiz-Vertical - Intermediate angles manual table II 800 x 800 mm as B-axis ( rotary table ) coolant attachment diverse accessories
Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
BHKW in container with Cummins diesel engine Lorey Somer generator 250KVA 1500U / min 50 hertz Storm Steuerung, arrangement is equipped with emergency cooler zusaetzl. regularly waited to zeit 21000 company hours. arrangement is operational and available immediately. for other questions I stand to them to verfuegung under 01727265324
used
Rotary vane vacuum pump Two-stage oel lubricated Manufacturer: Pfeiffer Type: DUO 250 Cat.-No.: PK D27 602 / K141 Status: Used (functional!) (A general recovery is offered) suction power: approx. 250 m3/h Endduck: > 5x10e-3 mbar Performance: 12 months (in case of general recovery) Including: user manual and oil Delivery time: ex works ; ready for use
Rotary vane vacuum pump oel circulation lubricated Performance: 12 months Manufacturer: Becker Type: U 4.250 SA/K motor: DS 400V suction power: 250m3/h final pressure: 3 mbar (abs.) . Generalueberholt Zubehoer: Oelfilling (Mineraloel) Delivery time: by arrangement Further details or technical advice via request; ready for use
Rotary vane vacuum pump manufacturer: Pfeiffer Type: BA251 Status: Generalueberholt Gewaehrl: 12 months Zubehoer: User manual equipment: mineral oil or by arrangement suction power: 250 m3/h end pressure with gasb.: approx.: <5x10e-1 hPa (mbar) delivery time: approx. 1-3 weeks and more Delivery: ex works; ready for use
Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Pfeiffer Type: BA251 Status: Rebuilt Warranty: 12 months Accessories: owner's manual Resources: Mineral oil or by appointment Suction power: 250 m ³/h Enddruckmit GASB.: approx. < 5x10e-1 hPa (mbar) Delivery time: approx. 1-3 weeks u.ue.V. Delivery: Ex works; ready for operation
Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation
used
Rotary vane vacuum pump Status: Generalueberholt; As capacity: 12 months Yield time: from stock Manufacturer: Busch Type: R5 RA 255D Engine: 400V Equipment: Mineraloile Nominal suction digesters: 250m3/h Final pressure: 0.5 mbar (abs.) Zubehoer: User Manual; Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you.
Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Tool: for press brake, base for press brake tool -Dimensions: see drawing in the photos -Dimensions: 2500/70/H22 mm -Weight: 26.1 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Prisms: 90° x 75 mm -Dimensions: see drawing in the photos -Dimensions: 2500/270/H175 mm -Weight: 188 kg
winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Manufacturer: Manitowoc, crane rope Ø 17 mm -Length: about 250m -Item No.: 03120320 D17 x 250M -Price: complete -also other crane ropes: available -Transport dimension: Ø 700 x 600 mm -Weight: 420 kg
Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: 1375 fully assembled threaded rods -Type: M10 x 250 SW 7 -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H300 mm -Weight: 235 kg
used
The plant was shut down in 2024 and has 19,900 hours of use. It has been operating at around 19-21 MW/h LM2500 plant, including dismantling and logistics management, with immediate delivery. The plant was shut down in 2024 and has 19,900 hours of use. It has been operating at around 19-21 MW/h Power Output: 22 MW 25,759 KVA x 0.80 (50 Hz) 11,000v (It can be adapted to 60 Hz) Working Hours: 19.900 Number of starts: 215 Last Start: Jun 2024 Control Panel: Woodward Micronet and Bently Nevada Auxiliary Systems: Included Available documentation: work history, MTU review, single-line diagrams, manuals, periodic inspections. Complete control room with Woodward Micronet control units, Bentley Nevada vibration monitoring, ABB protection relays, and Siemens HMI. Gearbox and alternator -- ABB 50/60 Hz, 11,000V Filter box and enclosure.
Used machine, Woma Twinjet 550 Z - 250 M Working pressure: 550 Z, P35 1,300 bar-143 lpm, 250 m, P18 2,500 bar-31 lpm Year of construction 2014 Drive: electric 500 kW Operating hours: approx.: 1,305 h, 3 gun Control , and accessories
Several transformers for sale: Here a Schneider Electric 250KVA 10-0.4KV. Bj2016 mint condition Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
# 3D Systems ProJet 2500Plus (Baujahr 2016) Gebrauchter MultiJet-Drucker in sehr gutem Zustand, ursprünglich als Händler-Demomaschine eingesetzt. Die Maschine basiert auf der MJP-Technologie (MultiJetPrinting) und eignet sich für die Fertigung hochauflösender Prototypen und Funktionsteile. Technischer Zustand Die Maschine wurde kürzlich gewartet und mit neuen Antriebsriemen sowie neuen Filtern ausgestattet. Alle Materialien wurden herstellergerecht entfernt, die Maschine wird leer übergeben. Die Betriebsstatistik weist ca. 1.400 Druckstunden und 181.000 gedruckte Layer aus. Verarbeitet wurden bislang ca. 24 kg Baumaterial und ca. 33 kg Stützmaterial. Lieferumfang 3D Systems ProJet 2500Plus Drucker 3D Sprint Basic Complimentary Software (Online-Aktivierung) Standort Die Maschine befindet sich in Budapest und kann nach Terminvereinbarung besichtigt werden. Der ProJet 2500Plus eignet ...
NEW, 250 cm width, 2.15 m³ capacity, 585 kg dead weight, with Merlo ZM2 attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
NEW, 120 cm long tines, 2 t load capacity, with Terex attachment (81 cm attachment width, 433 mm attachment height, top 35 mm, bottom 35 mm)
250 cm width, approx. 2.63 m³ capacity, 583 kg dead weight, with Atlas mount
NEW, 250 cm width, 2.15 m³ capacity, 585 kg dead weight, with Manitou attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
NEW, 250 cm width, 583 kg dead weight, 2.63 m³ capacity, with Kramer Claas Scorpion attachment
NEW, 250 cm wide, 2.15 m³ capacity, 585 kg dead weight, with JCB Q fit mount, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
maximum number of results exceeded
please refine your search
